root@ubuntu:~# ls -la
ls: cannot access .gvfs: Permission denied
I understand that with a desktop active, shelled as root, I could get this message. Does this kind of behavior effect applications like MYSQL, PHP, Apache etc?
When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
View 1 Replies View RelatedJust had a new VPS installed running Ubuntu Server 8.04 Getting some errors when I connect to the server and try to use apt.. only trying to install nano and after messing around I've managed to get the error to change.. but still can't get any further.
error
Code:
# sudo apt-get install nano
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I am trying to install COMSOL 4a in Ubuntu 10.04 and when I try to run ./setup and I am already connected as root the command line gives me a permission denied error.
View 6 Replies View RelatedI am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies View RelatedThe root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
I have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
As root I get the following result: ngssuse:~ # traceroute -nI 10.200.123.45
Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied. Is this a bug?
How is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View RelatedHi I am a complete newbie I have installed ubuntu 10.04 I have sorted problem with Mobile broadband, but having problems opening root folder I get a permission denied not the owner I have admin privalage as far as I am aware I was following something I read using terminal but kept getting a message saying something about the root I opened the file manager found root folder but still denied access. how I get access same is also true for lost&found folder but have to admit i dont know what that folder is.
View 7 Replies View RelatedI am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
I have installed Nginx with PHP-FPM on Debian 8 to learn more about Linux permissions. Nginx is run as www-data user.
I have created a simple PHP script that outputs the date. I have set the permission as 000 (no permission at all) and it is root:root. How come I can still run this script in the browser without getting access denied? The script is inside a folder with world execution. When removing the world execution permission, the script can't be run. How does this all connect to each other?
After some update every time I run update from the Yast or zypper I frequently get errors like the following (with zypper):
Code:
Permission to access 'http://download.opensuse.org/update/11.2/rpm/x86_64/unscd-0.43_0.45-2.1_0.2.1.x86_64.delta.rpm' denied.
Abort, retry, ignore? [a/r/i/?] (a):
If I type <r> then download continues. Is there any way to fix that or at least make it retry automatically?
how to configure it. What I am trying to is this: I have a departmental folder housing two sub folders. The permissions on the parent folder for the department are 770 and the users from that department are all in a group based on their departments name.
One of the users who is granted access as a member of the group needs to be denided access to one of the two sub folders. How do I allow all users in the department into the first folder (this works already) but at the same time allow all but one into the second folder?
Distro: Debian 8 Xfce
GPU: NVIDIA GTX 950M (hybrid with my 4th gen intel i7 I believe)
BIOS: Megatrends version 2.15.1236
New Debian/Linux (in general) user here! I've done a lot of google self-aid and have yet to yield any successful results. I currently just did a fresh install and followed ONLY the steps listed on the Wiki for Bumblebee [URL] .... Scrolling down to the common issues, I also amended the /etc/bumblebee/xorg.conf.nvidia file with a "Screen" section:
Section "Screen"
Identifier "Default Screen"
Device "DiscreteNvidia"
EndSection
I logged in my system as root. but when i run a simple shell script i got an error like . Permission Denied. why m getting this error.
View 3 Replies View RelatedI've just upgraded my laptop to Fedora 14 and installed LAMP on it for a test environment. I've followed the official instructions to install but seem to have a problem that I didn't have on F13 or Opensuse. Each time I try to access index.php on localhost I get a permission denied message and an SElinux alert. I have tried 7 different solutions on various forums and just can't view anything in a browser.
/var/www/html has been set to chmod 777
/var/www/html/index.php has also been set to chmod 777
A standard user can definitely read and write to the above files/folder. Until I commented it out the Welcome/Test page was working perfectly.
I have been trying to run the following commands several times in the last coupl weeks, to no avail."su" to get to root...then while root "apt-get update" for updatesalso"sudo apt-get update"BOTH areenied even with root or user-admin pwd.States that either permission is denied and/or frequently states that the command "apt-get" does not exist
View 4 Replies View Relatedi was trying to execute the following on Kubuntu.
Code:
echo 0 > /proc/sys/vm/vdso_enabled
But it says "permission denied". Probably I need root user rights. How to get it in Kubuntu?
I just converted to Fedora from Ubuntu and I have some questions:
1. How can I install nvidia driver? There is no 'jockey-gtk' in my fedora :3 (video card is nvidia 7200GS)
2. whats the equivalent for 'ubuntu-restricted-extras' in fedora? (ubuntu-restricted-extras is a package for A/V codecs, Java, microsoft fonts and Flash plugin)
3. I just move data from other hard disk to the fedora ones and now all the folders are locked (lock icon).
I try with:
su
chown -R fedora:fedora /home/fedora
but the permissions are denied for gvfs.
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error:
Code:
tom@tom-laptop:~$ mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
How do I overcome this?
ubuntu terminal. I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I followed this tutorial for setting up my server. Whatever I type into mysql or mysqladmin all I get back is Quote:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
View 1 Replies View RelatedI'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
View 10 Replies View RelatedI have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I am not sure if this is the correct forum to post this as I have usually been able to find the answers from other peoples threads.The error I receive is below.(changed "at" as can't post links)"#1045 - Access denied for user 'root' at 'localhost' (using password: NO)" Not entirely sure what has happened here. I have had this server running for a long time and today it seems to have spat it's dummy out!I have checked the config.inc.php and the controluser and controlpass are entered correctly so the error saying a password is not being usPHP Code:Thisis needed for cookie based authentication to encrypt password incookie
View 2 Replies View RelatedI have a new CentOS server install. I am trying to connect from a windows xp box using putty ssh. I can get as far as putting in the password for root user and then it tells me access denied.
View 2 Replies View RelatedIn previous Slackware libsane releases, my scanner was not supported. In 13.1 the support is there:
root@gandalf:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:3304 Hewlett-Packard DeskJet 990c
Bus 002 Device 004: ID 04a7:0229 Visioneer OneTouch 7100
[Code]....
Why am I suddenly getting "permission denied" both as root, and as the normal user (yes added to 'scanner' group)? What changed from the full DVD installation (using 2.6.33.4-generic and initrd) after added the the patches? I've been googling for months trying different "permission fixes" and fiddling with udev rules with no luck. So there is something I don't understand going on here.
I am pulling my hair out once again after trying for over 15 months off and on to get a tv tuner working under linux. I have just received my new tuner card which I thought was supposed to be easy to run, a HVR-950Q, no luck yet. But first I am trying to use something called mysql (new to me), for mythtv and [I] keep getting
# mysqladmin -u root password ma
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)
I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.