I have a new CentOS server install. I am trying to connect from a windows xp box using putty ssh. I can get as far as putting in the password for root user and then it tells me access denied.
View 2 RepliesI am pulling my hair out once again after trying for over 15 months off and on to get a tv tuner working under linux. I have just received my new tuner card which I thought was supposed to be easy to run, a HVR-950Q, no luck yet. But first I am trying to use something called mysql (new to me), for mythtv and [I] keep getting
# mysqladmin -u root password ma
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)
I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
for some reason root lost grant privileges and I can't get it back. The user got grant_priv = 'Y' in the usertable. I've tried to reset all the priviliges to the user by killing MySQL process and started up again without grant options with no luck. I've also tried lots of other things but can't seem to get it work. Here is what I get: Quote:
[root@xxxxxxxxx mysqldba]# mysql -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 2
Server version: 5.0.77 Source distribution
[Code]...
I followed this tutorial for setting up my server. Whatever I type into mysql or mysqladmin all I get back is Quote:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
View 1 Replies View RelatedI set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
i trying to create file in /usr/local from below command"sudo df | grep /dev > dev_string.txt"First it asked for sudo password. I enterd sudo password. but I was not able to create the file dev_string.txt .Next time onwards it not asking sudo password also.the below execution flow
##################################################
/usr/local/$ sudo df | grep /dev > dev_string.txt
bash: dev_string.txt: Permission denied
[code]....
I followed instructions to enter single user mode by adding single at the end of kernel line but after that it doesn't ask for root password but brings up the sh# prompt. Isn't that supposed to be insecure? I understand for this the grub password can be applied but even after adding "single" it should ask for root password..or it should not..??
View 3 Replies View RelatedCannot seem to use my mysql password, keep getting the error
"Access denied for user 'root'@'localhost' (using password: YES)"
So I tried checking my password using mysql -u root -p and I get the same error as above. I've tried accessing mysql with skip grant tables disabling the need for a password so I could reset my root password. After going through the necessary steps I still get the error above when typing my password in for mysql.
ubuntu terminal. I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I am not sure if this is the correct forum to post this as I have usually been able to find the answers from other peoples threads.The error I receive is below.(changed "at" as can't post links)"#1045 - Access denied for user 'root' at 'localhost' (using password: NO)" Not entirely sure what has happened here. I have had this server running for a long time and today it seems to have spat it's dummy out!I have checked the config.inc.php and the controluser and controlpass are entered correctly so the error saying a password is not being usPHP Code:Thisis needed for cookie based authentication to encrypt password incookie
View 2 Replies View RelatedI can log in Mysql database successfully using
Code:
mysql -u myusername -p mypassword
Now, I need to execute GRANT PRIVILEGES. But, when I try to execute
Code:
mysqladmin -u myusername password mypassword
the below error occured
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'myusername'@'localhost' (using password: NO)'
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error:
Code:
tom@tom-laptop:~$ mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
How do I overcome this?
i have tried to follow some the tutorials on google to setup mysql for remote access however, cannot seem to do it. am i missing something.
i have edited /etc/mysql/my.cnf bind-address directive to a static ip address. then, i grant user@'%' access to database and restart mysql
after doing all that, when i try to remote access mysql i get "Access denied for user"
Succeeded in connecting to internet using my wll phone. I can now connect using 'wvdial' command in root terminal. But I want to connect through terminal. I tried 'sudo wvdial' command. Then I am asked for my password. But I cannot type my password there. When I type, nothing appears on the terminal window. Ofcourse there's no problem with my keyboard.
View 5 Replies View RelatedI need to get an old MySQL Client(4.1)to connect to an even older MySQL Server (3.23).The goal is to do a Java/JDBC connect to the old Linux/MySQL 3.23 database, in order to update text information for a Lucene search (which will also run on linuxdev2). The problem is that I can't connect to the Linux/MySQL 3.23 server from a remote Linux/MySql 4.1 client. I can't connect from JDBC; I can't connect from "mysql":
Code:
LOCAL (intranet):
mysql -uSOMEUSER -pSOMEPASSWORD mysql => OK
REMOTE (from linuxdev2):
mysql -uSOMEUSER -pSOMEPASSWORD -hintranet mysql => FAILS:
ERROR 1045 (00000): Access denied for user: 'SOMEUSER@linuxdev2' (Using password: YES)
[code]....
So I'm attempting to get my system to not require the root password while still requiring some form of authentication. My current issue is getting yast2 and its components to ask for the user's password and not the root's.
Is there a way to have these tools ask for user's password instead of root's?
I've created LVMs, and use this after I have added new disks to the system. df -h give me some lines, and one of them looks like this:(this is the system which holds backup files - and I want to disconnect it from time to time to create a duplicate backup)
/dev/mapper/backup-backup 147G 123G 17G 89% /media/backup
Problem: When I disconnect this drive, the system will not boot. Gives me the "enter password for root" or click control+D to continue. How can I get around this check - if the disk fails to load, or have been taken out.
I have got a RHEL 5.6 server configured to authenticate via a Windows 2008 domain controller via LDAPS.Everything is working fine, except from the following: When I create a new user in Active directory and check the option "user must change password at next logon", the new user cannot logon and gets an "access denied" message. In /var/log/secure, I find the following:
Mar 1 14:43:21 cpssvn10 sshd[5363]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.3.12 user=testuser2
Mar 1 14:43:21 cpssvn10 sshd[5363]: pam_ldap: error trying to bind as user "CN=CPSS Testuser 2,OU=IBM,DC=cpss,DC=smarterplatform,DC=com" (Invalid credentials)
Mar 1 14:43:23 cpssvn10 sshd[5363]: Failed password for testuser2 from 192.168.3.12 port 4583 ssh2
As soon as I uncheck the "user must change ..." option, the user can log on without problems. Also password change via the passwd command works.
I have tried to not allow root access and have created a wheel user.
Now I can not logged in as root.
Its okay but when am logging as wheel user and trying to access root then it says:
Code:
Hey I have made a user so that he is able to access my ftp files though filezilla.
However he does not have access to the root folder. How can I edit this?
I forgot the root passwd for linux (via the "single" mode) and, according to all confirms, did so successfully! I then try to log on to Centos as root, and I can't....it says "incorrect passwd"! So then I log on as another, regular, but not root, user, with that passwd, and boot up into Centos. if I try to "su" to root, with the new root passwd, again it says its incorrect. there is no "system admin" passwd set. I checked!. I need root access within Centos!
View 8 Replies View RelatedCan someone assist me with recovering/resetting the password for Root via Single User Mode in CentOS v5? I've modified the kernel line using Single, S, and 1 but it appears that these commands are being totally ignored as the server continues with the boot process and displays the GUI logon screen. The server in question is a VM box running on ESX v3.5 U4. The person that created this VM is no longer employed here and I've exhausted everything I know regarding Single User Mode.
View 12 Replies View RelatedI am going to remove root access via SSH which seems fine but I don't know how to add a new user, do I have to create a group first or are there existing groups I can add a user to, and does it matter which group I add a user to if I want this user to have root access with sudo?
View 11 Replies View RelatedI have installed Ubuntu 8.04 inside windows and every time I go to the terminal and type "su" it asks me for a password. Well the password I set before the install doesn't work, it gives me an authentication failure. I thought that since it was inside windows it didn't set me as a root user. I go to user groups and I see my name there and then "root" above it, but its grayed out. Is there a default root password I can enter?
View 5 Replies View RelatedWhenever I start a browser, it asks me to enter my root password because of some pgp keyring issue. I set my password as standard in seahorse, but no change.
The Gnome3 interface sometimes lags very noticeably.
Packagekit constantly blocks my zypper use, and it won't shut down. Not even after I log out and log in again. I tried just removing everything related to packagekit, but that just breaks everything.
Searching for repositories is a pain and there are too many different ones and I never know which one is the latest and how these will be upgraded in the future. Zypper itself is awesome, everything else about package and repo management is not.
I can't uninstall applications properly. I remove them via zypper, and when I do a distro update they get added back in. (gnome games for example)
Whenever I install or search for anything in zypper, I get hundreds of these errors: GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)..but it still finds something.
I'm in the process of configuring a "guest" account for houseguests tose my computer. I've got the file permissions set, but I'd also like to restrict their access to the terminal. It seems to me that most of the damage that can be done to a computer goes through the terminal.I downloaded Pessulus (I use Gnome)but it doesn't require a password. the profiled user can just open Pessulus and alter their profile -- what's the point?Is there a way I can require a user to enter a password, either for any terminal or Pessulus?I like Pessulus -- it's concise and easy to use. But it doesn't seem very secure as I understand it.
View 5 Replies View RelatedI have downloaded the backtrack 4 r2 but when I started it, it didn't show me the line to enter the user name and the password
View 5 Replies View RelatedI have installed the new phpMyadmin3.4.1 on a server running Ubuntu 9.10 with apache and mysql. It runs on php5.2.10The apache config seems fine as the virtual directory that I configured works fine. http://<ip-of-server>/phpmyadminlink works. The home page is displayed. But when I enter the user name and password, instead of logging into the console, it again redirects me to the index page of the site. There are no errors displayed. I have checked that cookies on browser are enabled.The server is hosted on amazon web services, if that makes any difference
View 7 Replies View RelatedMy password doesn't work to enter super user mode in the terminal. this password works for all other administartive uses in and out of the terminal, just not for entering super user mode.
View 8 Replies View Related