i was trying to execute the following on Kubuntu.
Code:
echo 0 > /proc/sys/vm/vdso_enabled
But it says "permission denied". Probably I need root user rights. How to get it in Kubuntu?
The root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
Just had a new VPS installed running Ubuntu Server 8.04 Getting some errors when I connect to the server and try to use apt.. only trying to install nano and after messing around I've managed to get the error to change.. but still can't get any further.
error
Code:
# sudo apt-get install nano
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I am trying to install COMSOL 4a in Ubuntu 10.04 and when I try to run ./setup and I am already connected as root the command line gives me a permission denied error.
View 6 Replies View RelatedI am in the process of setting up a new server (Debian - Lenny - now updated to Squeeze) and every things were going fine. But unfortunately from today , whenever a user login to ftp, it says
550 permission denied and not able upload / edit or remove any files ( i am able to see all files and folders)
Yesterday it was working fine..
I tried using bot Pure Ftp and Proftp and the issue is common
What I am trying to do is
add a unix user exalmple through adduser command with default directory for the user as /var/www/example.com (shell enabled)
owner of example.com is example
and using the above user name and password to ftp files to the folder
We are using ubuntu 10.04 desktop version.ls > /dev/lp0 permission denied in user account we need user can access lp0 /usblp0. Our printing module is lp0 writing technology example dir >prn.
View 3 Replies View RelatedAs root I get the following result: ngssuse:~ # traceroute -nI 10.200.123.45
Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied. Is this a bug?
How is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View RelatedHi I am a complete newbie I have installed ubuntu 10.04 I have sorted problem with Mobile broadband, but having problems opening root folder I get a permission denied not the owner I have admin privalage as far as I am aware I was following something I read using terminal but kept getting a message saying something about the root I opened the file manager found root folder but still denied access. how I get access same is also true for lost&found folder but have to admit i dont know what that folder is.
View 7 Replies View RelatedI am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
i've query regarding, user creation in Linux( RHEL 5), i.e, i've created a user ([root@localhost ~]#useradd slash ) and switched into that user, but am not able to run commands in it......It's displaying a message saying, PERMISSION DENIED. Do we need to provide any permissions while creating a user
View 7 Replies View Relatedwhen i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies View RelatedI have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.
So in the smb.conf file i made the entries as following:
After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.
I'm using ubuntu,i have a bin file under my /usr/bin, if i run the command under root user i'm getting no problem an it works fine,if i try it in with differnent user im getting
Code:
semctl:premission denied
so how can i edit my bin file and change it to right permission
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
View 1 Replies View RelatedI followed instructions from here: [url]
Everything seems to be ok but if I try to login it says following:
I have tried with numerous clients and accounts but still nothing, I cant get past the login. What may be wrong?
Here is the log from account creation, could the last line be causing the problems?
I had some hassle with the last two iptables lines but once I took away RH-Firewall-1 from those lines iptables gave no error anymore.
I changed this: -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
To this: -A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
I created a user called gdev.
As root, I made a dir /var/www/html/test
I have done these same steps on numerous machines. However, in this instance, gdev cannot cd into test/
In user mode [non-root] linux machine, tried to bind a socket by using a"ioctl(iInterfaceSocket, SIOCSIFADDR, &stCommand)". I am getting error 13 -> Permission denied because of user mode. If change from usermode to kernel mode everything works fine.I need to bind the socket in user mode only, please suggest solution for the abovewhile explaining the above,
View 2 Replies View RelatedI have two computers. One runs unRaid NAS software which is built on Linux. The other is running XBMC media center which is built on Ubuntu. XBMC has a local folder (/home/kevin/.xbmc/userdata/Thumbnails/) that it stores thumbnails in. I am essentially trying to move this folder to my server, but XBMC needs to see it as local. I started by deleting the old Thumbnails folder and it's contents. I then created an empty Thumbnails folder on XBMC and I also created one on my unRaid comp (192.168.1.20/disk7/xbmc_thumbs/Thumbnails). On the XBMC comp I run:
Code:
chmod 777 Thumbnails
mount -t cifs //192.168.1.20/disk7/xbmc_thumbs/Thumbnails Thumbnails
It creates the mount and as long as I'm logged in as root, I can copy files to the XBMC Thumbnails folder and they appear on my unRaid server's Thumbnails folder. The problem is that if I log in as kevin (the user that XBMC runs as) I get permission denied errors. I've tried changing ownership of the XBMC Thumbnails folder to kevin via:
Code:
chown -v kevin Thumbnails
And it says it changed it, but if I check, the ownership and group both still show as root. I'm thinking that may be because now that the mount is made, it's showing the ownership of the Thumbnails folder on the unRaid server? Whatever it's doing I can't seem to change it and XBMC can't write it's thumbnails because of this.
Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedI logged in my system as root. but when i run a simple shell script i got an error like . Permission Denied. why m getting this error.
View 3 Replies View Relatedroot@ubuntu:~# ls -la
ls: cannot access .gvfs: Permission denied
I understand that with a desktop active, shelled as root, I could get this message. Does this kind of behavior effect applications like MYSQL, PHP, Apache etc?
ubuntu terminal. I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I followed this tutorial for setting up my server. Whatever I type into mysql or mysqladmin all I get back is Quote:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
View 1 Replies View RelatedI have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error:
Code:
tom@tom-laptop:~$ mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
How do I overcome this?
when i move to /usr/share/backgrounds/ and after right click when i go to properties then in tab of Permission it says I am not ROOT user. through TERMINAL I changed the root password using commands (sudo passwd root ) tthe changes has been made succesful eventhough it does not give me root user status.When i connect to internet then after click of connect button ,a pop up appears and says "Enter password to unlock your login keyringThe password you use to log in to your computer no longer matches that of your login keyring."
View 1 Replies View RelatedI am not sure if this is the correct forum to post this as I have usually been able to find the answers from other peoples threads.The error I receive is below.(changed "at" as can't post links)"#1045 - Access denied for user 'root' at 'localhost' (using password: NO)" Not entirely sure what has happened here. I have had this server running for a long time and today it seems to have spat it's dummy out!I have checked the config.inc.php and the controluser and controlpass are entered correctly so the error saying a password is not being usPHP Code:Thisis needed for cookie based authentication to encrypt password incookie
View 2 Replies View RelatedI have a new CentOS server install. I am trying to connect from a windows xp box using putty ssh. I can get as far as putting in the password for root user and then it tells me access denied.
View 2 Replies View RelatedI'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
View 10 Replies View RelatedWhen login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
View 1 Replies View Related