I logged in my system as root. but when i run a simple shell script i got an error like . Permission Denied. why m getting this error.
View 3 RepliesThe root user of Linux doesn't have permission to read/write a regular file, unless all users have permission to read/write this file, like below:
drwxrwsrwx ....... file_name
However the owner of the file can still read/write this file.
AND:
0) not the problem of execution, just read/write
1) not the problem of device because regular user can read/write it.
2) the result of command id:
uid=0(root) gid=0(root) groups=0(root)
so I don't think it's the problem of group.
How is it possible that I get perm denied when I'm copying files in console.
View 1 Replies View RelatedHi I am a complete newbie I have installed ubuntu 10.04 I have sorted problem with Mobile broadband, but having problems opening root folder I get a permission denied not the owner I have admin privalage as far as I am aware I was following something I read using terminal but kept getting a message saying something about the root I opened the file manager found root folder but still denied access. how I get access same is also true for lost&found folder but have to admit i dont know what that folder is.
View 7 Replies View RelatedI am attempting to make a backup copy of a file, but every time I try to copy the file, I get a "permission denied error -- even when running as root. The file is on a volume mounted as /media/Data . No problems reading/writing other files on the volume.
Here is the info on the file:
-rw-------. 1 root MailServer.img
I've tried chown but get the permission denied as well. This is a virtual machine image that runs fine, but even with the VM completely shut down, I get the same error.
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
When login through root on HP-tru Unix server, I am trying to access a directory, it is saying "Permission Denied".. Also, an sh file is also not able to execute through same root access..I have checked the permission of the directory as well as for sh file through ls-ltr.. It is also fine.. Root System rwx-rwx-rwx--What could be the possible cause, and how to correct it..
View 1 Replies View RelatedAs root I get the following result: ngssuse:~ # traceroute -nI 10.200.123.45
Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied. Is this a bug?
Just had a new VPS installed running Ubuntu Server 8.04 Getting some errors when I connect to the server and try to use apt.. only trying to install nano and after messing around I've managed to get the error to change.. but still can't get any further.
error
Code:
# sudo apt-get install nano
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I am trying to install COMSOL 4a in Ubuntu 10.04 and when I try to run ./setup and I am already connected as root the command line gives me a permission denied error.
View 6 Replies View RelatedI'm running PCLinuxOS with no other OS installed. Thought I'd have a go at chainloading. just for interests sake.So, I opened Konsole, entered su and entered my root password. The command line turned red so, I imagined all was well. But when I then keyed in '/boot/grub/.menu.lst' I was refused access.
View 10 Replies View Relatedi was trying to execute the following on Kubuntu.
Code:
echo 0 > /proc/sys/vm/vdso_enabled
But it says "permission denied". Probably I need root user rights. How to get it in Kubuntu?
root@ubuntu:~# ls -la
ls: cannot access .gvfs: Permission denied
I understand that with a desktop active, shelled as root, I could get this message. Does this kind of behavior effect applications like MYSQL, PHP, Apache etc?
In previous Slackware libsane releases, my scanner was not supported. In 13.1 the support is there:
root@gandalf:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:3304 Hewlett-Packard DeskJet 990c
Bus 002 Device 004: ID 04a7:0229 Visioneer OneTouch 7100
[Code]....
Why am I suddenly getting "permission denied" both as root, and as the normal user (yes added to 'scanner' group)? What changed from the full DVD installation (using 2.6.33.4-generic and initrd) after added the the patches? I've been googling for months trying different "permission fixes" and fiddling with udev rules with no luck. So there is something I don't understand going on here.
I'm hoping someone can help me out with this issue I'm having using acl(s). I have a user I want to grant access to logs I have stored on my server. I am doing this by setting up an acl to that directory where the logs are stored. My settings seem to look fine, however I cannot read or even reach the directory with the said user; we'll call him "userP".
Here is my code:
To ensure userP has access to the parent directory (jboss) code...
Not sure what I'm doing wrong here: there are no errors in the logs; just "Permission denied" however I try to get to the directory.
Does anyone know what I'm doing wrong?
On the current machine:> su - username (it works)> ssh username@localhost (doesn't work)
What could be the problem?
Since lucid was installed, I can no longer access my floppy drive. I try creating an image on it and this happens:
$ dd if=a.img of=/dev/fd0
$ dd: opening `/dev/fd0': Permission denied
How do I get permission to do this? I'm the only user and am an administrator.
I am installing Oracle 11g on Oracle Enterprise Linux 5.0 32 bit (virtual machine)i did all the mandatory steps, i am trying to run the installer but i am facing the below:bash: ./runInstaller: /bin/sh: bad interpreter: Permission deniedknowing that the run isntaller is found in an iso file, in which i linked the VMwarre CD/DVD drive to it
View 4 Replies View Relatedi am trying to make my SSH-server more secure on my unbuntu server. And i want to do a little modifiing to the /etc/ssh/sshd_config folder. When i try to accsess it is says permission denied if i do sudo /etc/ssh/sshd_config it says command not found.
View 3 Replies View RelatedI'm using the find command in a PHP script like this to update permissions on all files but not directories:
<?php
// whole bunch of code
exec("find /var/www/vhosts/mydomain.com/httpdocs/path/to/some/directory -type f -exec chmod -R 440 {} ;");
[code]....
After I type sshd: 192.168.1.11 : allow and
sshd : ALL : Deny
I can't access hosts.allow or deny any more.
It says "Permission denied"
Before I typed that, I can access hosts.allow and deny.
By the way, I was wondering what command to edit hosts.allow.
For example, I want to put sshd: xxx.xxx.xxx.xxx : allow in that file.
when i logging with root then i saw message "permission denied" Then i changed root shell directory "usermod -s .usr/ root" but it says "permission denied" again. what is the default shell directory, or what can i do for change permissions.
View 1 Replies View RelatedI am not sure if this is posted somewhere else, if it is sorry. Anyways I downloaded files to my desktop from firefox and i need them to be in usr/local file, but if i try to put it in there it tells me permission denied. Is there anyway around this?
View 5 Replies View RelatedI tried writing zreos to my HD but it denied permission. How do I get around that ?
View 6 Replies View RelatedIf I run this as su I get the same thing. If I log on as root user It is the same as well
View 5 Replies View RelatedI have created user, group, gave permission chmod and chown with -R option. But when i try to enter into the directory for that created the user and group, I can not enter into.
View 4 Replies View RelatedWhen I create a folder in the system, it's created successfully
Code:
[test@localhost localhost ]$ cd test/
-bash: cd: test/: Permission denied
drw-rw-r-- 2 test testinstall 4.0K Sep 16 18:51 test
[root@mail tmp]# ./PE1650_RAID_FRMW_LX_R168387.BIN-bash: ./PE1650_RAID_FRMW_LX_R168387.BIN: Permission deniedalso get it when trying to run[root@mail tmp]# ./ESM_FRMW_LX_A37_R117418.BIN-bash: ./ESM_FRMW_LX_A37_R117418.BIN: Permission denied
View 2 Replies View RelatedI write following script.
#!/bin/bash
TEST=$(ifconfig | grep "ppp")
if [ -z "$TEST" ]
[code]....
I have some files lying around in /root/bla/, all these files are 644 and /root/bla/ is 755. Still, when I try (as a different user) to cp /root/bla/file ., I get a "cp: cannot stat: Permission denied". I also cannot ls /root/bla/, I also get a Permission denied... what gives?
View 3 Replies View Related