Fedora Hardware :: Unable To Install Reliance Netconnect In 13?
Nov 12, 2010
Ii am not able to install reliance netconnect broadband + on my fedora 13. the os is not detecting the usbmodem .it is treating it as a usb storage device only. there is a cross p[latform package supplied by the vendor. on using this. the package after installing gives an error message that "not able to mount usb". the same is running fine on windows xp where it got auto installed without any hiccups. do reply fast to help me install and access the internet through this usbmodem through fedora 13. the model no of the usb modem is ZTE - AC2736.
I have ubuntu 11.04 in my netbook and when I inserted reliance netconnect broadband usb modem,it automatically detected and after giving the necessary details it was connected..But I am not able to access any websites..On googling I found that I have to make changes to /etc/resolv.conf..But resolv.conf file is missing.
I'm using ubuntu karmic and I'm not able to connect to the internet with my reliance netconnect data card using network manager. Other distros like fedora, opensuse n sabayon connected easily with nm. Ubuntu detects the data card flawlessly but just doesnt connect.This problem has been persistent even in previous ubuntu versions, n I used to use wvdial. But downloading wvdial on some other comp with every dependency is really cumbersome.
is there anyway that i can install my reliance netconnect lxu800 modem graphically(GUI). i am not well versed with command line interface. i just downloaded ubuntu desktop version and installed it alongside windows vista.
i recently installed Fedora 14 on my laptop and when im tryin to connect the reliance dongle its not getting detected even as a usb ... when i tried to install it on fed 13 the rpm package inside the usb stick gets installed but when i click on the shortcut for moden it shows "device not connected"
i have satanic ubuntu 8. i was trying to connect to my reliance netconnect broadband+ via the following method. the process failed. its a usb broadband dongle thing.
Code: theunknowndoor@theunknowndoor:~$ SU bash: SU: command not found theunknowndoor@theunknowndoor:~$ su Password: su: Authentication failure
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration.
I tried connecting my reliance netconnect usb modem using mobile broadband in network connection but its unsuccessfull inspite of proper configuration..
I have installed ubuntu 32 bit version on my HCL netbook. I use reliance netconnect (Huwai EC 1260 or 168c). I have configured it and it works well. But the only problem is that I have to connect the netconnect device before booting. If I connect it when its ON, the networkmanager does not connect automatically. even on the right on the tray icon, enable mobile broadband option is not there.
I have fedora 14 and reliance netconnect Huawei EC325 modem. I am not enable to configure it. How to configure the modem by providing step-by-step instruction
I've Reliance Broadband internet modem . very first time only it was connected but next onwards it's not connecting , I am trying last one month to connect internet , I am tired .I had seen lot of thread related to this problem but it's not connecting, my device is identified by network manager and i entered user name and password ,connecting process is going on but finally it's not connecting . i installed wv dial and usb modeswith data
i earlier used bsnl broadband(indian) in ubuntu and configure it using pppoeconf. right now i shifted to reliance broadband(not usb modem) but now pppoeconf cannot detect the connection It shows something like " Sorry I scanned two interfaces but the access concentrator of ur provider did not respond.plz chck ur ntwrk and modem cables. anoder reason fir the scan failure may be anoder running pppoe process which controls the modem
Reliance Netconnet Broadband+ ZTE does not work out-of-the-box with Ubuntu 9.10. I haven't yet upgraded to Ubuntu 10.04 (iso download is at 46% ). Does it work out-of-the-box or is there some packages that need to be installed? (I have a dual-boot laptop Ubuntu/Windows 7)
i am beginner to this field of ubuntu(linux)...last week i have installed ubuntu 11.04...alongside windows xp...but i couldnt configure my net connection...i am using reliance LG LXU800 modem(cdma)intially it was working after using this commansudo modprobe usbserial version=0xeab product=0x9357that time my linux version is 2.6.38.7but now it gives fatal error and it isFATAL: Error inserting usbserial (/lib/modules/2.6.38-8-generic/kernel/drivers/usb/serial/usbserial.ko): Unknown symbol in module, or unknown parameter (see dmesg)
I am using Ubuntu 9.04, I want to connect my Reliance ZTE cdma modem in ubuntu,could anyone give the steps in detail. i have run the following commands in the terminal and pasted the result for each command
I have a USB huawei ec1262 wireless internet stick from Reliance. I google'd on how to install it. I am using Debian Lenny. I know that there is a "mode-switch" package that needs to be installed but this is not available on the down load package list for Debian. i can find this & also instructions if possible on how to get this working on my Lenny system .
My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
Everytime i try to install any app on fedora 7 i.e. RPM i get error message that says cannot get to interent, while i have access to internet on fedora ..
I've recently updated my box from Fedora 12 to Fedora 13....today I wanted to install VLC and followed the procedures provided on VideoLAN's website on how to install VLC (See Below):
Use RPM Fusion for F11, F12 and F13 (available for x86, x86_64, ppc and ppc64) Install rpmfusion-free-release-stable.noarch.rpm for F11, F12 and F13.
I am trying to install EBS R12 on linux OS. but it gives an error er 50011 due to domain. I am using stand alone system. how can i fix domain name. I have already identified hostname
install vxl-1.11 using cmake and am getting various problems like Avi File NOT found and many more files Dart,ECW,DC1394,MPEG include dir,Xerces bxml are not found. install vxl...and i would like to know what are they dependency packages required to be installed for vxl....
Hi, I attempt to install f10 via dvd. I am asked about my language and keyboard. When I move on from here I get a message. the fedora disk was not found in any of your cdrom drivesI toddle off to my laptop and the install works fine My computer has 2 drives - CD & DVD. Does this message indicate that the computer is only looking at the CD drive. I guess I need to add some options to the install command.
i have recently got a system assembled with the following configuration
intel g31 mainboard intel core2duo 2.8 proc. 4 gb ram 1 gb ati radeon hd4650 pci xpress card 160 gb harddrive with win-xp pro
i have been trying to install fedora 10 since last week but i am not able to run it in gui mode the anaconda installer tells me failed to load in gui mode and running in text mode only. i am new to fedora and am next to unknown. what should be done to get the fedora running on me computer
During installation of fedora 10 i depare with a issue that requires internet connection to proceed the installation. since i don't have a internet connection in eth0 just have one in wlan0 that is not detected by the configuration i didi not could install the fedora 10. What was my mistake, i download the Fedora-10-i386-netinst.iso to boot. Should i download another image to boot.
Last week I put together a new build:Asus p6t deluxe v2, i7 920, etc etc And installed Win7 RC which worked perfectly, however for the past couple days I've been trying to install Fedora but it seems to never work. The F11 Full disk cannot load anaconda during install, but still manages to install, however the installation cannot boot. The live disk loads, but then a black screen with eth0 and eth1 link is down pops up. So I tried other dists, Ubuntu 8.04 cannot boot, 9.04 boots and installs, but after reboot doesnt work. Anyone got any ideas as to why I cannot install Linux. Also in Win7, I cannot install Fedora as a VM. It just goes to 100% load while booting and such.