I've been running my shellscript for about half an hour now. It's taking longer than I thought to process all the data. I have the process ID of it. Is it possible to save the process and log out then log in and continue the process? I know how to pause a process using kill -pause pID and continue it using kill -cont pID. But that only work if you don't log out after pausing it.
View 5 Repliesone tell me the internal working of kill command. that is how it kills a process internally or from where it picks file to continue its process.
View 3 Replies View RelatedI have installed XAMPP in Ubuntu, but I do not know how the process continue after the start XAMPP.
View 3 Replies View Relatedrunning a large program on a remote SSH server the other day when I was disconnected. This is a large program, ~48 hours to complete, and I was disconnected around hour 40. I have restarted the program using the following (Note: I am already ssh'd into the server) ./20090427_9crossing > 20090427_9crossing.out & Now, I believe this will run the program in the background and output to the file. So, if I get disconnected again will it continue to run? If not, is there a way that I can get it to keep running?
View 7 Replies View RelatedMy requirement is nearly transferring 50GB files from remote server to local server via SCP command,while transferring the data its break-en because of some reasons in 35% itself. is it possible to resume the transfer process again from this 35% process.
View 3 Replies View RelatedI am downloading a big file on linux VPS, and I am connecting remotely via Putty to do it? Once I initiated the wget command to download the file, if I close the putty window, will wget continue to download the file in the background even though the session is technically closed?
View 11 Replies View RelatedI have a high priority service that I start with sudo nice -n -10 process. This process does not need superuser rights though, except for the priority elevation. But nice requires superuser privileges to elevate priority.
View 3 Replies View Relatedsend the details raid configuration how to use in linux el5 and how to indentify the raid degrade process and how to rebuilt the process.
View 4 Replies View RelatedCode:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
[code]....
Description of what the code does or what i intended to do:
1. Created a child process from parent process using 'fork()'
2. Sent a signal 'SIGALRM' from child process to parent process using 'sigqueue' function.
(The Third parameter of 'siqueue' function contains the message (message msg) which the child process wants to send to the parent process.'msg' is a stucture instance containing a) pid of child and b) string) 5. Print the 'msg' sent by child process inside the signal handler function 'sig_action_function' of the parent process I am getting some junk value when this line is executed
Code:
printf("%d
",msg->cpid);
I expected to get the pid of child process, which the child process sent to parent process through the signal.
as we all know Process Scheduler does Process scheduling and its a process as well. I was just wondering that if this happens then the Process "Process Scheduler" should be a part of Process queue as well.
So if there are 5 process are there in Process queue & process scheduler is administrating them then since its also a process, once it puts a process under RUN state it should itself go inside queue because at one instant only one process can get executed on a processor. This is quite confusing for me. Please help me out. I tried to search on this but could not find any relevant topics.
How do you find the parent process of zombie processes?
When the child process is something where the parent is not entirely obvious...
Is there some way to list processes in tree format or something?
I have a process running on Linux.When i do ps -eaf | grep <myProcess>, it show muliple entries for <myProcess> with different pids for each entry.Kindly tell me what could be the reason for a process having multiple pids?
View 1 Replies View RelatedI want ro ran new commandy after sungrid finish his task.Exp:qsub -q bla command1; command2 command2 start only when job of command1 finished.
View 9 Replies View RelatedI've some file with .sh extensions that runs some softwares.Now,how do I stop running that filesI know we run the command ./start_tomcat.sh to start the apache.Is there any command to stop that file/process or is it just kill the process to stop the process
View 2 Replies View RelatedI installed Debian 5.0.8 alongside Windows XP 64bit, and the installation went fine. However, when I choose to boot into Windows, the menu still shows the option to continue with the Debian installation. Debian was installed by burning the iso in Windows and then launching the CD rather than booting into the CD. My searches turned up with results to actually continue with the installation process, which like I said, went just fine. I want to boot right into Windows from Grub (if Windows is selected) instead of having the installation menu pop up again.
View 1 Replies View RelatedFighting against Grub2 boot troubles, i've seen on screen that the problems comes when detecting internal SATA devices.
But logs dont help about the scanning boot process, so i search a way to log this verbose process by adding some code into /etc/default/grub or something else.
I want to kill parent process after "fork()" method. but if I kill parent process with "exit(0)" method, main() thread is terminated as well so child prosess doesn't work anymore. Is there any way to kill only parent process without affecting to child process?
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]....
I have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh Code: #!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
echo $result
if [ "$result" == "" ];
[code]...
Is there any difference in cpu usage for process in init.rc(runs automatic when boot is happened) and manually running process. Will these both have same priority by default...?
View 1 Replies View RelatedI tried googling but didn't get any answer for this.I have a process called "abc" and it is running with PID "123".I have a putty session opened with PID "999".I am giving kill -TERM 123 from putty session.My process "abc" before dying it should catch the PID of the terminal which provided TERM signal to it.Is there any way to find this out
View 2 Replies View RelatedI have ubuntu 10.04.1 and a H.P.psc 1311 all-in-one printer scanner.Printer works ok but when trying to scan,with xsane,it goes through the scanning process and an image of the document comes up on the screen.
When I try to save this image to desktop or file/folder whatever I get the message; "Child Process Error. Failed to execute OCR command:GOCR:no such file or directory."
I need a command to get the process name by process id.
View 2 Replies View RelatedI have a shell script to identify whether the process is running or not. If the process is not running, then I execute another script file to run my application. Below is my script and saved this script as monitorprocess.sh
Code:
#!/bin/bash
result=$(ps -ef | grep -v grep | grep "applicationname.sh" | awk '{print $2}')
[code]...
Consider the following code:
Code:
int main()
{
int i=0;
pid_t pid;
for(i=0;i<2;i++)
[code]....
I get the following output:
Parent: chid_pid=4356 i=0 parent's pid=4355
This is child 4356 i=0
This is child 4357 i=1
[code]....
I can observe instead of two children(as I expect) processes there are three. This is because child process 4356 creates its own child. Why all the messages of the type "This is child X i=Y" are concentrated one under another? How exactly fork works? Is affected by the fact that I have a dual-core processor?
I was downloading to a USB drive and went to continue the download without the USB drive plugged in. "Save location not found " etc. So I plug in the drive now it wants to start all over. How do I make it start from where it left off. There are no transmission files on the ISB drive dir. that seem to hold the info and the transmission "queue" has reset as if I had not downloaded any data yet.
View 2 Replies View RelatedGiven the pid of a process that's running on a x64 linux, how do I tell if it's running a 32 or 64 bit binary? I can look at the binary it's running out of 'ps' and do a file on that but I was wondering if there's a way to tell by looking at /proc/ or something like that.
View 2 Replies View RelatedI wish to pin a process to a CPU1 in my dual CPU machine - how can I do it in Linux - any pointers ?
View 2 Replies View RelatedI am developing a node application and there is an option to set the process title (process name). This only sets it in some tools (like ps and top), but not in htop or netstat.
I found this article that explained how most applications do it, but it doesn't change in netstat.
That lead me to wonder where those programs are getting the process name. Would they be getting it from /proc/##/cmdline? (## being the PID of the process)
I figure messing with things in /proc is a bad idea (and probably not possible), so if this is where those programs are getting it, is there a way to change it?
From previous post I have a netbook from work that I have Debian Squeeze running on and did a full disk encryption (minus the minimal boot loader in /boot) in case it gets stolen. However, with a laptop/netbook it has a battery and I believe the encryption protocol (LUKS - correct me if I'm wrong) uses RAM to store the decrypt key. So if someone is quick they can dump RAM and analyze it until they get the key. Or even if the key is not stored there they could dump RAM which would have recent files cached unecrypted.
Is there an easy process of encrypting RAM while still using as RAM? What I mean by that is I know you could make a ramdisk sort of like how Live CDs do and encrypt that, but at best (that I know of) I can only mount it as swap space.
i have ported linux into arm and i want to run two background process on target
i have two c programs a.c and b.c
i have cross compiled them as
arm-linux-gcc -o a a.c
[code]...