I forced a quick restart with 'sudo shutdown -f now' and when logged back in gnome-panel doesn't start at all. I can right-click on the desktop & run terminal from there, so I'm running web browser from terminal. I tried 'sudo killall gnome-panel' & got 'no process found' I tried doing a full restart, still the same.
I tried running gnome-panel from the terminal.
'gnome-panel' gives me my panel after a 4 or 5 second delay. If I exit the terminal or Ctrl-C I lose the panel again.
'sudo gnome-panel' gives me what appears to be the panel for the root user.
I installed avant-window-navigator and followed these instructions to remove gnome-panel from startup: URL...However I have since uninstalled AWN and now cannot get gnome-panel to load at startup.I think I have put my settings back where they should be -- looking at them in gconf-editor:
1. desktop > gnome > session, the required_components_list is [windowmanager,filemanager,panel]
2. desktop > gnome > session > required_components_list, the panel value is "gnome-panel"
Yet gnome-panel does not load at startup. Any ideas why?Clarification: I can get gnome-panel to load by listing it under Startup Applications, but I am curious why it won't load via the gconf settings.
i have a netbook with ubuntu desktop 10.10 (gnome), i don't know what i've done, t got a message
"OAFIID:GNOME_FastUserSwitchApplet panel encountered a problem "
and i don't know how it was fixed, now it works good , but the panel doesn't start normally (quickly), i have to wait few minutes to get the menu bar and the other elements,
I'd like to start Tomboy (the sticky-note application) at start-up but have it minimized to the Gnome panel. I tried adding tomboy to System -> Preferences -> Startup Applications, but then Tomboy opens up in full-screen mode. Then I tried adding tomboy-panel instead, but that doesn't seem to do anything at all. What's the trick I'm missing?
Recently updated to 10.10 Wondering if it's possible to change the start icon on the gnome panel? In the past I have been able to accomplish this by navigating to the theme's icon folder (usr/share/icons), replacing it with my new icon, updating the cache and restarting gnome. That method doesn't seem to be working however.
I'm using 11.04 with the old panels, no side panel. For some reason gnome-panel doesn't launch automatically so I have to do it via terminal, which means I have to keep the terminal tab open if I want to keep my panels.
Adding it to startup programs resulted in invisible panels (Cannot register the panel shell: there is already one running.), which I bypassed by typing gnome-panel --replace. I would like a permanent solution though..
Im having a rather bizarre problem with the gnome panel in ubuntu 11.04. When i go to places and try to home folder, desktop, etc with a mouse click, Nautilus does not open. Instead a really old looking program called textedit opens. The only thing that doesnt cause textedit to open is clicking on computer.
I need help adding a nohup command in this command line: su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhyth" When I execute the script using root on the command line it works fine. But, when I reboot the server the process doesn't start. This script will go into the etc/init.d and rc2.d directory.
#!/bin/bash case $i in start) su - rhx12 -c "/rhythx/rhythx/bin start /rhythx/rhythx" ;;
If I try to change the icon style, it changes the icons in my desktop and in Nautilus, but it doesn't change the icons in the panels nor the ones in the menus.
I've scheduled a task in gnome-schedule to run at each reboot. When I click on "preview task" it initiates a one-time run just fine. However, after reboot it just doesn't want to start the task.
When I boot my Fedora 15 installation it shows me the blue screen with progress indicator, however I do not reach the login screen.Instead I see the textual shell where the last item is:Started Display Manager.It looks like my monitors are not detected anymore. I have been working with them though (this appeared after a restart). I am not sure how I determined it but I read in some log that no display was detected. Nothing changed to the hardware set up however.I see some suggestions to run system-config-display as root.However this command can not be found nor can it be found when I run yum install system-config-display.
Every time I start Ubuntu, I set up an ssh session to a server. In order to automate this I made an entry in startup programs like this:/usr/bin/gnome-terminal -e '/usr/bin/ssh name@server.com'Nothing happens when I log in, and I've checked that the command works.
If I: 1. Add drawer(s) on the gnome panel 2. add items to one or more of those drawers 3. reboot then: 1. all empty drawers can operate normally 2. drawers that have stuff in it cannot be opened.
i installed debian cd 1 on a school's computer however, some administration tools are missing (like add/remove programs...) , i tried to install the full gnome but the installation doesn't start
Pmaison:/home/pmaison# aptitude install gnome Lecture des listes de paquets... Fait Construction de l'arbre des dİpendances Lecture des informations d'tat... Fait Lecture de l'information d'İtat İtendu nitialisation de l'tat des paquets... Fait Lecture des descriptions de tches... Fait Pas de version candidate trouve pour gnome....
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left, I see the following error message:
"Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround.
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
So I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
Does any one know how to get the name back on the gnome panel. It seems to have disappeared , I tried using the add to panel feature by right clicking on the panel but cannot locate it in the list.
I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.
I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click. Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
I am trying to get rid of the gnome panel shadow in ubuntu 11.04(classic, not using unity). I know that I can get rid of it using compiz but I do not want to use that. I suppose my question would be, where is the "panel-shadow.png" file located that I can edit and make transparent? I found it before but cannot for the life of me now.
I've managed to ALT-RIGHT-click-add some launchers to the top gnome-panel. When i now click on a launcher the gnome-panel crashes(?) and reappeares, but the program starts without problems. If i do this two times in a row (1 sec diff or so) the gnome-crash screen appears and i've got to log out although all the programs are still running without any problems.
dmesg shows this: [14460.034820] gnome-panel[4428]: segfault at 18 ip 0000003810fc05df sp 00007fffcaae4c30 error 4 in libgtk-3.so.0.0.10[3810e00000+3fb000]
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
Older machine here that I upgraded to 10.04 after a clean install of 9.10 some months ago. When booting into GNOME, the desktop image flashes on the screen and the second the bars on top and bottom try to appear the system boots out of the desktop and returns to the log on screen. I assume this is a crash of Xserver, but just guessing. Per another page I ran: lspci | grep VGAand returned:
01:00.0 VGA compatible controller: VIA Technologies, Inc. KM400/KN400/P4M800 [S3 UniChrome] (rev 01)
I know - old machine Typing this from failsafe mode, would be great to hear from someone as to what I can do to get this working in normal mode again.
