Ubuntu Servers :: 10.04 - MySQL Process Does Not Start At Boot

Apr 13, 2011

On my Ubuntu 10.04 LTS Server, mysql does not start at boot. I tried this but does not work.
Code:
root@dev:~# chkconfig mysql ON

The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'K02mysql' missing LSB tags and overrides
insserv: warning: script 'S10vzquota' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs .....

How to make sure mysql process comes up automatically after every reboot

ADVERTISEMENT

Fedora Servers :: Mysql At Boot Time In 10 / Get Mysql To Start At Boot?

Jul 28, 2009

I am trying to get mysql to start at boot without any success.

The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:

Starting mysqld daemon with databases from /data/mysql [ OK ]
Starting cups: [ OK ]
STOPPING server from pid file /var/run/mysqld/mysqld.pid
starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho
sts/denyhosts.cfg
090727 04:35:47 mysqld ended

The same init script works fine in Ubuntu.

View 2 Replies View Related

Ubuntu Servers :: MySQL Does Not Start On Boot

May 11, 2010

Ubuntu server 10.04 comes with a new event based startup system, and I wonder if that can be responsible for this problem. The server has been upgraded from 9.10. On reboot mysql does not always manage to start... /var/log/mysql/error.log has info similar to this:

100511 19:05:00 [ERROR] Can't start server: Bind on TCP/IP port: Cannot assign requested address
100511 19:05:00 [ERROR] Do you already have another mysqld server running on port: 3306 ?
100511 19:05:00 [ERROR] Aborting

So apparently port 3306 is not 100% unused when mysql tries to open it or somehow network connections are not ready, even if mysql start is supposed to wait for 'net-device-up' and 'local-filesystems' according to /etc/init/mysql.conf. This does not happen on all reboots. I am supposed to be able to start it manually with command 'start mysql' but that does not seem to work also. When I try start it again, it says mysql is running but no databases can be reached and mysqld is not active, reboot and good luck is all that helps...

As far as I know there are no firewalls installed, at least none I have manually configured and it has worked with no problems on 9.10. So this new upstart thing seems responsible. It simply does not let mysql wait until it can start in good way. That also explains why it's a random problem. If all starts happen when and if there is free processor time, it does not always start things in the same order on every reboot. The key here is port 3306, or whatever port mysql is configured to use. The upstart system simply needs delay the start until the port is 100% free and available for the system to use.

View 1 Replies View Related

Ubuntu Servers :: Mysql Do Not Start At Boot?

Jul 26, 2010

Recently, few days or maybe a week ago I updated mysql and now mysql service do not start at boot. I must start it manualy, before this update it start automaticly.

View 9 Replies View Related

Ubuntu Servers :: Start MySQL Before Jabber On Boot

May 3, 2010

Currently when the system boots, It boots jabberd2 before mysql. So jabber fails. Then, later mysql is loaded. I either want to force jabber to load mysql first, or make the system boot mysql first. I've tried changing /etc/init.d/jabberd2 to say "# Required-Start:
mysql $network $named $remote_fs"...
However, insserv says that mysql service has to be enabled... so I assume that's an issue because mysql is an upstart script.

View 5 Replies View Related

Ubuntu Servers :: Compiled Mysql Start On Boot?

Mar 24, 2010

I just compiled mysql apache and php from source and I have apache to start up from boot but I don't exactly know how to get mysql to do the same.

Edit: Also how do I add mysql to path? Should I just symlink it to somewhere thats in the path or what? And if that is the case wheres the best place to symlink it too.

View 3 Replies View Related

Ubuntu Servers :: Sometimes Does Not Start - Boot Process But Then Hangs

Oct 31, 2010

Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.

View 2 Replies View Related

Ubuntu Servers :: MySql Database Won't Start - How To Make It Start

May 4, 2011

I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?

View 9 Replies View Related

Ubuntu Servers :: Update Process (and I) Can't Stop Mysql?

Mar 10, 2010

I'm running an update, and get this:

Code:
The following packages will be upgraded:
apache2 apache2-doc apache2-mpm-prefork apache2-utils apache2.2-common libcupsys2 libmysqlclient15-dev linux-libc-dev mysql-server
mysql-server-5.0 php5-imap sudo
12 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
5 not fully installed or removed.

[Code]...

View 1 Replies View Related

Ubuntu Servers :: MySQL Will Not Start / What To Do?

May 4, 2010

I don't know. I have had tons of issues with the Linux today. Now when I try and start mysql it just fails. the syslog says code...

The command mysql results in:

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

I have even tried to uninstall mysql and reinstall it an nothing works. Any suggestions?

View 4 Replies View Related

Ubuntu Servers :: Mysql Will Not Start?

Mar 14, 2011

ive been trying to fix this for a while. i dont have the original my.cnf, but i dont even know if thats the error:

Code:
pavel@pvl1:~$ sudo service mysql start
^C
pavel@pvl1:~$ cd /var/log/[code]....

View 1 Replies View Related

Ubuntu Servers :: Can't Start MySQL?

Jun 26, 2011

I have trouble with MySQL server on my Ubuntu 11.04.Below is what I get in Terminal

root@linux:/home/karl# /etc/init.d/mysql start
Rather than invoking init scripts through /etc/init.d, use the
service(

[code]....

View 3 Replies View Related

Ubuntu Servers :: Mysql Won't Start On New Installation 10.04?

May 10, 2010

I just installed a brand new ubuntu server 10.04 32-bit, choosing the LAMP option on install. Upon reboot I couldn't connect to mysql from another machine, so on this new server I changed the file at /var/mysql/my.cnf

[Code]...

View 9 Replies View Related

Ubuntu Servers :: Start Mysql After Replacing My.cnf With My-huge.cnf?

Sep 26, 2010

I want to use the my-huge.cnf file, but when I replace /etc/mysql/my.cnf with the one in /usr/share/doc/mysql-server-5.1/examples/my-huge.cnf, mysql will not start; it is just hanging the process. The only thing i'm seeing in log files is repeating

Sep 26 06:42:51 caseaware kernel: [52647.422669] type=1505 audit(1285497770.990:1240): operation="profile_replace" pid=28591 name="/usr/sbin/mysqld"
Sep 26 06:43:22 caseaware kernel: [52678.675282] type=1505 audit(1285497802.320:1241):

[code]....

View 1 Replies View Related

Ubuntu Servers :: Upstart Unable To Start Mysql On 10.04

May 9, 2010

mysqld not running on boot, I can start it manually with

Code:

sudo -u mysql mysqld

If I attempt to start it with Upstart I get

Code:

dom@mythbox:~$ sudo start mysql
start: Job failed to start

View 1 Replies View Related

Ubuntu Servers :: MySql Database Wont Start?

Apr 8, 2010

I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?

View 9 Replies View Related

Ubuntu Servers :: Mysql Fails To Start After Upgrade To 9.10?

Feb 18, 2010

I've just upgraded to 9.10, and mysql fails to start. When I do an /etc/init.d/mysql start, I just get
* Starting MySQL database server mysqld ...fail!with no additional errors or information to say what went wrong. I saw this thread http://ubuntuforums.org/showthread.php?t=1322070 but the fix mentioned does not apply, as I don't have the #skip bsd line in my config file.

View 5 Replies View Related

Ubuntu Servers :: 'start Mysql' Never Returns And No Mysqld Running

Apr 26, 2010

Since /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...

me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!

View 9 Replies View Related

Ubuntu Servers :: How To Use Start-stop-daemon To Execute Process

Sep 27, 2010

I've just installed subversion.I need to create a script /etc/init.d/svnserve that will start at boot time.I want to use start-stop-daemon --start so I can track my process and eventually kill it using start-stop-daemon --stop.My problem is that I can't get it to work and the documentation shows no exemple.

I've replaced $DAEMON by the whole line: svnserve -d -R -r $REPO_ROOT and got -d is not an option.I'm not quite sure what to do at that point. If someone has some experience with start-stop-daemon it would be great.

View 2 Replies View Related

Fedora Servers :: MySQL Daemon Failed To Start?

Apr 17, 2011

I am not able to start mysql server...when i type command sevice mysqld start it saysMySQL Daemon failed to start.Starting mysqld: [FAILED]so how to solve this problem ?

View 10 Replies View Related

Fedora Servers :: MySql Does Not Start On A Glusterfs Client

Nov 16, 2010

I was installing a 2 server cluster ISPConfig3 with the help of GlusterFS. I was following this manual - Link

In the server the file /etc/glusterfs/glusterfsd.vol

Code:
# Configuration for the mysql server volume
volume posix-mysql
type storage/posix
option directory /media/big/myweb/export-mysql

[Code].....

View 3 Replies View Related

OpenSUSE Install :: Boot From USB Connected External Hard Take Long Time From Loading INITRD Image To Start Boot Process?

Jul 18, 2011

I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.

View 1 Replies View Related

CentOS 5 :: C5 - Testing HTTPD And MySQL Start At Boot

May 13, 2010

Alright, so I installed the c5-testing versions of httpd, php, and mysql, since my server is used for other daemons primarily and these aren't used as production servers I decided to test the bleeding edge versions of these, report any bugs I find, etc. The problem is, since I updated httpd and mysqld they no longer start up at boot. I tried using chkconfig --add with both of them, but both their init.d scripts have - for levels, so I did not assign any levels. They still do not start up at boot. [URL]

View 2 Replies View Related

Slackware :: Change The Option To Have Samba Start During The Boot Process?

May 17, 2010

Where do I change the option to have samba start during the boot process? I've googled and I've found old posts that say it's a line in /etc/rc.d/rc.inet2 but in my semi-current box, I don't see the part about starting stopping the samba server.

View 5 Replies View Related

Ubuntu Servers :: MySQL Server Not Starting With Boot?

Jul 26, 2010

So recently my MySQL server doesn't startup when Ubuntu boots (it used to) and therefore causes database errors with my Web applications. How do I add MySQL to the run at startup list?

View 1 Replies View Related

Ubuntu Servers :: Zabbix-Server Mysql Not Starting At Boot?

Oct 18, 2010

I recently installed an Ubuntu 10.04LTS server. I have zabbix-server on that machine, and I noticed that after reboot it won't start. Probabily, the mix of upstart and old init.d scripts result in zabbix starting when mysql is not active yet, in fact in zabbix-server.log I see it cannot reach db. How can I make sure zabbix-server waits for mysql?

View 9 Replies View Related

OpenSUSE :: MySql Won't Start / No File Mysql.sock?

Feb 5, 2009

I thought that the problem is in the phpMyAdmin not in the mysql. But now i think different. It seems that the problem is right in the mysql. I think that there was no root user, when mysql was freshly installed. Unfortunately i did everything i can find on internet (some tutorials) but they don`t helped me at all, maybe i fu**ed up the mysql service. So i reinstalled it, and when i want to start it there is no file mysql.sock and i get the following:

linux-nepg:~ # service mysql restart
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL warning: /var/lib/mysql/mysql.sock didn't appear within 30 seconds

View 9 Replies View Related

Ubuntu Servers :: Mysql Error Stopping MySQL Database Server Mysqld?

Jun 17, 2010

I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this

* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.

So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.

View 1 Replies View Related

Ubuntu Servers :: Mysql ERROR 1045 \ Trying To Allow Remote Access To Mysql?

Jan 14, 2011

i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :

Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing

[code]....

View 4 Replies View Related

Ubuntu Servers :: Xampp Will Not Start On Boot?

Sep 29, 2010

I have recently set up my web server using the LAMPP package for Ubuntu. Now I'm running Ubuntu Server 10 so my machine boots into the console and not gdm. Also I have my machine autologin as root so I can simply turn my server on and not mess around with logins. Now I created a simple shellscript for starting lampp and then I put it into etc/init.d/, chmod -x file.sh to give it executable permissions, then I update-rc.d file.sh defaults but nothing happens on startup. It simple takes me to the console and nothing more happens. I have to manually start lampp on every bootup.

View 1 Replies View Related

Ubuntu Servers :: Samba Does Not Start On Boot-up?

Mar 22, 2010

My problem is that the samba daemon does not start on boot-up anymore on my file-sharing server.Samba starts flawlessly if start it manually.If I run:

Code:
/etc/init.d/samba status
I get :

[code].....

View 9 Replies View Related

Ubuntu Servers :: Start Liferay At Boot?

Aug 20, 2010

I know Ubuntu has changed the startup system in 10.04 and I am wondering how to go about starting my liferay server at boot (instead of starting manually).

There's already a startup script, can I setup a symlink to somewhere to have it start automatically?

I've tried searching through documentation and google but most of it applies to older versions of Ubuntu.

View 3 Replies View Related

Ubuntu Servers :: Apache Server Don't Want To Start By Itself On Boot

Apr 6, 2010

My apache server don't want to start by itself on boot.

View 9 Replies View Related

Ubuntu Servers :: Getting Virtualbox Guest VM To Start On Boot?

Mar 29, 2011

I'm running the host server on Ubuntu 10.04 LTS (64bit) . I'm using virtual box. I want to automatically for one of the guest vritualboxes to start on reboot. Following is already done without a success. Please help me in solving this.

1. I have created the following shell script
#!/bin/bash
/usr/bin/nohup /usr/bin/VBoxHeadless --startvm "VMNAME" 2> /dev/null &

2.From the current logged on user I did a crontab -e and did the following

crontab -e @reboot /bin/sh /home/myaccount/shellscript.sh note that I do not encrypt the home directory and sufficient permissions are there.

View 9 Replies View Related

Ubuntu Servers :: Start The Cod As A Specified User On System Boot?

May 4, 2010

Whats a way to start the cod server as a specified user on system boot. Whats the best way for me to do this? The cod server is located in the users home directory

View 8 Replies View Related

ADVERTISEMENT