i installed windows xp last night on vbox useing ubuntu 1004 as the host os
i went to try to open a port for winmx 2.6 and its timeing out so i looked @ the ip and its completely diffrent from my host os ip so how would i allow out going connections in windows xp running under vbox
I would like to ask if someone try or is there any key binding about the conky apps..I would like to know if it possible to key bind the conky running in desktop so that everytime i want to see the running conkyrc on the desktop there is no need for me to minimize the open windows inorder just to see my running information in the desktop
View 1 Replies View RelatedI'm not that great with mailservers, and just been thrown a curveball with a MS Exchange environment for which there is apparently no solution... yeah, right. But is there a workaround?
The problem is that the site mail (SMTP) needs to be sent via port 26 instead of the commonly used 25. Port 25 is mapped to a mailfilter, which apparently causes havoc with some of the mail, and the techs that have been on site trying to coax the Exchange server to co-operate have said that the only way would be to get rid of the filter.
The problem is that there are number of apps that are unable to have the outgoing port changed and so keep sending mail out on port 25.
I look after the Unix/Linux side of things at work, and I was wondering if there was an easy way to set up a Ubuntu box to receive mail on port 25 and just forward it to the MS box on port 26? So, in other words (and I hope this makes sense): monitor port 25, and forward whatever comes in on port 25 to the server on port 26. Simple portforwarding, or is it? What steps do I need to take?
I have Installed Virtual Box 3.1.6 on my system. The host is running on SuSe 11.2 and I have installed the SuSe 11.2 as guest OS on the VBox. I have a another system in which I installed Win XP. How to make serial port connection between the VBox and Win XP system.
View 2 Replies View RelatedI am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedWhat i am i doing wrong? i download these very good app's from yast
and at times i run into a problem when you click on the app and it looks like it wants to open,the application's icon is on the bottom panel and the icon is bouncing up and down where there cursor is and then eventually it disappears.Is it timing out?
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI use Ubuntu 10.10 and setup Proftpd apps which I would like to use to access to my files from outside of my SOHO LAN network. This is work on LAN very well but from outside I get some error msg. However I establish connection with my Ubuntu FTP Server machine but I can't get list of files and folders on server.
I get this error msg:
227 Entering Passive Mode 89,216,116,8 243,96 --> i know what this no means: my Stat IP and the port
500 Illegal Port Command
Get Directory
FTP Port Command failed
Some Additional Information:
On the edge of SOHO LAN i use Cisco router for access to the Internet.
NAT is configured, PAT (NAT overload) is configured also.
I forward ports which I needed for FTP: 21 and 20, and passive ports 60000 - 60001.
When I use Windows OS and BUlletProof FTP server (port 21 or some custom port i.e. 65021) I only forward that port (21 or custom port i.e. 65021) and everything works great.
I have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
I open the ports in graphical mode.
I downloaded a WHOLE bunch of linux programs, but I can't open them. How do I open programs such as mupen64 plus?
View 9 Replies View RelatedAll open apps when minimised just disappear, they do not go to the task bar.What can I do to get open apps to minimize to the task bar.
View 1 Replies View RelatedSomehow and I'm not sure how. But opengl apps will completely hang Ubuntu 10.10 x64.This is my 2nd fresh install. I'm using the latest nvidia driver for my asus gtx460 (260.19.12)Have already verified rendering is enabled, uninstalled nouveau & blacklisted, mesa glx is installed, no errors (that I can see), etc.When I run apps, even a gl screensaver, it will hang my whole box. To the point where I can't even, ctrl + alt + F1 (or F2, F3), for cli. So no command line output. And I've tested this in World of Padman, Alien Arena, Call of Duty 4 (under Wine), even Amnesia: The Dark Descent. Apps will start, but any gl content will quickly hang.This is the first time running ubuntu x64, and a new box
Hardware:
Processor: AMD Phenom II 965 BE 3.4
RAM: 8 GB of Corsair XMS3
HDD: 600GB WD Velociraptor HD
Graphics: ASUS ENGTX460 1GB
Motherboard: ASUS M4A87TD EVO
I'm trying to create a bash script that will open firefox, evolution, gedit (specific file), etc. For the most part it works, but after it opens evolution or gedit, it pauses execution, until I close that app down.
I don't want to have this done at login, i want to pick and choose when I open them all.
I use the workspaces a lot.It helps me de clutter my desktop.One thing that does bug me about it though, is that every time I start my PC or laptop I have to move the auto start apps to the workspace I want them on. They always kick off in Workspace 1, I want them in specific spaces.
View 9 Replies View RelatedDoes anyone know of any Open Source apps that can be used to identify a color being used? I'm building a new site for a client and in their logo is a color that I can't seem to match to any html code. Someone mentioned a tool for Windows that would do this but since I haven't touched Windows in more than 10 years.
View 5 Replies View RelatedUbuntu 10.04 fresh install on eee 900. I had previously tried Cairo-Dock and AWN (successfully but I like that DockbarX is integrated into the panel) I installed Dockbarx like so:
Code:
sudo add-apt-repository ppa:dockbar-main/ppa
sudo apt-get update
sudo apt-get install dockbarx
DockbarX was working.
Then I uninstalled Cairo and AWN with Synaptic.I got a notification of an error in the panel saying I had broken packages - see broken package filter to check it out.I can't find filters in Synaptic.Then I noticed DockbarX was empty (and I had pinned Firefox to it) So I tried uninstalling and reinstalling via terminal. No problems with that but when added it to the panel again it was still empty . I rebooted several times during these attempts.
Quote:
Symptoms:
- Launchers disappear
- Open applications not reflected in launchers
Jun 7/2010 status: New → Incomplete
[code]...
But I have 0.39.3-1.
I did an automatic update and rebooted this morning and I now have a bit of a nightmare situation where I can't open the majority of applications, including the terminal. When I rebooted, my desktop loaded as normal, but then when I try to open the terminal (from Applications -> Accessories or from my quick launch panel), nothing happens other than the quick launch panel disappears for a second then reappears. This is the case for most other apps, but not for Chrome (obviously).
EDIT: Used Alt+F2 to open the terminal, ran safe upgrade and then rebooted, but still having the same issue. As Ubuntu was booting, there was a "Broken pipe" message, which didn't stop the boot process but is still a bit worrying. I've run a file system check but this hasn't resolved the problem either.
Is there a way (in Ubuntu) to open applications automatically after login (and maybe after a couple of seconds) so that they are automatically placed (in sequence) on a particular portion of the screen and assigned to a particular desktop number?
View 4 Replies View RelatedI did an automatic update and rebooted this morning and I now have a bit of a nightmare situation where I can't open the majority of applications, including the terminal. When I rebooted, my desktop loaded as normal, but then when I try to open the terminal (from Applications -> Accessories or from my quick launch panel), nothing happens other than the quick launch panel disappears for a second then reappears. This is the case for most other apps, but not for Chrome (obviously).
Used Alt+F2 to open the terminal, ran safe upgrade and then rebooted, but still having the same issue. As Ubuntu was booting, there was a "Broken pipe" message, which didn't stop the boot process but is still a bit worrying. I've run a file system check but this hasn't resolved the problem either.
After upgrading GNOME to 2.32 in my openSUSE 11.3 x86_64 running graphic applications with sudo is impossible. (that means it worked before upgrading GNOME)
Code:
etam@etam-laptop:~> sudo xeyes
root's password:
No protocol specified
Error: Can't open display: :0.0 From /etc/sudoers:
Code:
Defaults env_keep = "LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS XDG_SESSION_COOKIE XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER DISPLAY"
Some interesting facts:
[code]....
I just installed apache. I didn't change the configuration files at all except add Quote: # added servername to avoid the could not determine fqdn error ServerName myname.homelinux.org to apache2.conf. Apache is working locally (I get the `it's working' screen at [URL]). However, I cannot access my computer from an external computer by going to [URL], which is equivalent to [URL] -- [IP address changed slightly for privacy] Here is a screenshot to my router settings. I disabled the filter for port 80 on the router. here shouldn't be a firewall, unless it's automatically installed with ubuntu 10.4. (sudo ufw status says `inactive'.)
I checked my ports from [URL] and indeed port 22 is open (ssh-ing into my computer externally is not a problem), whereas port 80 is closed. What step in opening up port 80 am I missing? (I also made sure my ISP isn't blocking port 80.)
I am trying to access my desktop remotely via VNC. I can already access my computer using ssh, and I managed to open port 22 on my router:
Now I must open port 5900 for VNC, and I think I did exactly the same thing:
Using [url](a port check service), however, my port 22 is OPEN and my port 5900 is CLOSED. Yes, I restarted my router after making the changes.
I can seem to open port 25565 for a java application (executable jar)
I'm running ubuntu server 9 thoroughly up to date code...
Yet connections to port 25565 fail when I have the firewall enabled (sudo ufw enable)
For example canyouseeme.org says "Error: I could not see your service on port (25565) Reason: Connection timed out"
And connections to port 25565 _DO WORK_ when I disable the firewall (sudo ufw disable)
canyouseeme.org says "Success: I can see your service on port (25565)"
I heard when running Ubuntu I need to set it to open with one port. I had a friend ran Ubuntu on his laptop at school and had other Ubuntu users at school got access to his computer, is that possible?
View 2 Replies View Relatedneeding to open a port in ubuntu, then use it for my VirtualBox Pc.My VirtualBox is running - Windows XP I have a router connected to my network - Linksys WRT54G Now lets begin, I have tried opening via there router homepage. But when I go to [URL] and test port 4900 is still says that it is closed.
View 3 Replies View RelatedTor open port 23 for telnet. Is this normal ?
View 3 Replies View RelatedI have two computers on a LAN. (This is history not a Bazaar question, although I have one of those too) One of them (Ubuntu 9.04) Im using as a Bazaar repository over sftp. Its been working fine for about a year. Then we had a thunderstorm that knocked out our Internet service for a couple of days. When it came back up everything is working fine accept I could no longer commit to the server. A little detective work showed that ssh was not running on the server. I started it and Bazaar then couldnt find the repository files. I still suspected an ssh problem, but port scans from both computers showed port 22 open on the server and I could do a ssh login from the client ok. Then I started fiddling with ssh on the server and now I have ssh problems on top of the Bazaar problems.
On the server I deleted then regenerated the ssh keys. Ive done
sudo /etc/init.d/ssh reload
sudo /etc/init.d/ssh start
I get a normal starting message and ps ef |grep ssh
shows /usr/sbin/sshd running. But the port scan does not show 22 open and I get connection refused at the client.
No matter what I do, i cannot get port 3100 to open. This is for a new MMO i am CBT on. I know it works on windows because that is how I installed it and played. But I prefer being on Linux. Majority of all other MMOs work fine. Just this one has to have udp 3100 open.
The following is a rough output of all the methods I have tried with no success. As you can see I have done some extensive research first before posting here.
Now its become a lil bit of an obsession.
I cannot get the following command to work:
And yes I tried the "spaces" in different places thinking that was the prob. So i cannot see if 3100 is in the list or not
I eventually turned on the firewall "ufw enable" add the port there, and output:
Some references
[url]
Firewall stuff: [url]
I even manually went into the router and turned it on there.
I add these lines for startup purposes.
Do I need to do something in "wine" ?
I feel i am starting to repease myself
results of "iptables -L"
Code:
Is it possible to check if a particular port is open for a particular ip in the terminal?
View 4 Replies View Related