Ubuntu :: Mobloquer Is Blocking Internet Access On Wlan
Mar 8, 2011
i am running a ad hoc wifi service from my laptop to share my internet connection with my other laptop
i am also running mobloqer on the first laptop.
but when i try to access internet in my other laptop, i cant do it unless i disable mobloquer in the first laptop,
but with mobloquer switched on(in the first laptop), i can use utorrent on the second laptop but cant browse any websites (using firefox or chrome !)
first laptop is running ubuntu 10.10 second laptop is running win xp sp2
i want to allow internet access in the second laptop while mobloquer is running on the first laptop, is it possible to do so ?
View 1 Replies
ADVERTISEMENT
Jan 18, 2010
Mobloquer starts up at boot and before I've even opened firefox or transmission or anything, mobloquer shows that is has started blocking several outgoing connections as well as ton of incoming connections. I was wondering if the outgoing connections is normal and what's a normal amount of network activity to show up in system monitor when I'm not actively using the internet.
View 2 Replies
View Related
Mar 12, 2009
when I try to connect to internet SELinux give my a preventing NetworkManager here is what its say:
Code:
Summary:
SELinux is preventing NetworkManager (NetworkManager_t) "getattr" to /dev/ppp
(ppp_device_t).
[Code]....
View 2 Replies
View Related
Jun 13, 2010
i have the following system in my lan.
firewall(iptables)
etho(private) - 192.168.2.1
eth1(public) -189.117.57.2
squid server at 192.168.2.10
my request is that i have to make all out bound internet connection should go from proxy server , not directly to firewall. Please specify a iptable rule for blocking direct internet access. my clients ip ranges from 192.168.2.20 to 192.168.2.47
View 5 Replies
View Related
Apr 6, 2011
Brand new to the OpenSuse project. I'm have an old AMD Duron running 11.3 and I am having no luck in connecting to the www. I'm using a D-Link usb wireless adapter. I seem to have an IP address for the PC. here is the print from ifconfig:
wlan0 Link encap:Ethernet HWaddr 00:12:0E:45:75:F5
inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::218:eff:fec45:75f5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:246 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 3 Replies
View Related
Jan 23, 2010
recently ran into a problem with my internet access. Im using open suse 11.2 on a Dell Vostro 1520 laptop. I managed to get my wlan running and i can use firefox to access my router. In my router the laptop is also showing as connnected, dhcp reserved an ip for it.However if i try to browse the internet, no page is loading, actually no software that needs access to the web is working.
View 3 Replies
View Related
Jun 13, 2010
I installed several desktops on my system to test them out recently. After that I did an update and the system proposed to autoremove some files that were not used anymore. Since then, I can't connect to the internet from any of my desktop environments. In GNOME, the wireless network applet completely disappeared, the same thing with KDE, so I'm thinking a system driver must have been deleted. Could you indicate me any file that I might need to download to repair this problem?
View 1 Replies
View Related
Jun 17, 2010
I bought a wired broadband dsl router to provide another layer of security for my computer running ubuntu. I just plugged it in without installing any software etc. It blocks the internet connection.
View 3 Replies
View Related
Aug 26, 2010
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
View 3 Replies
View Related
Feb 26, 2010
Have an issue after an upgrade to connect to the internet using Firefox and Thunderbird.Can perform upgrades and use the Ping command.Have configured the Firewall as per the guidelines.[URL]
View 2 Replies
View Related
Sep 3, 2011
How would one block an IP range access to a Debian-based Linux system for say 47.1.1.1. - 48.255.255.255? Would it be with the hosts.deny file? If so, how would it be written in the file? Also, would the system require being restarted for the changes to take effect, after writing to the file?
View 14 Replies
View Related
Sep 2, 2010
I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies
View Related
Mar 15, 2009
SElinux is blocking my internet connection and every time when I connect t the internet (pppoe connection) I ge message.
View 2 Replies
View Related
Feb 9, 2011
I'm running a program called Synergy+ to let my keyboard and mouse control multiple computers. One of Synergy+'s features is that clipboard (copy-paste) data is able to be shared, as in copy on one machine, paste onto another. I would like this functionality removed but Synergy+ has no way to disable it. I'm looking for any ideas to block clipboard data from being transferred. Is there a way to block a program from accessing the machine's clipboard data?
View 5 Replies
View Related
Feb 18, 2010
We are switching from an uncapped 512kb line to a 4MB line at the office... One catch though. The 4MB line will only be linked to a 30GB account, without the option to top up. I therefore have been asked to put something in place to regulate what the staff download at work. Basically block movie, music and torrent downloads should be sufficient, but they would also like to have a list of where staff have been in case of abuse. I have tried OpenDNS in the past, but the guys took great delight in getting around this, and did it within minutes... I can't enter a proxy setting into their browsers, because they all have local admin rights on their Windows boxes and will just disable that. How do I do this on a server level, so that they can't get around this?
View 3 Replies
View Related
Mar 6, 2010
I'm trying to setup ssh access on my Fedora 12 laptop. I get the following error message in /var/log/secure when I try to login from another machine using ssh and the login is denied:
Code:
sshd[3025]: error: Could not get shadow information for <user>
sshd[3025]: Failed password for <user> from <ip> port <port> ssh2
If I do a 'setenforce 0' I can login and no error is logged.
View 10 Replies
View Related
Jun 3, 2011
Linux is what i'd like to learn, so Howdy to all and i hope to speak to you all regularly
in short, I started with Ubuntu Linux about 6 months ago, Didn't like it, i researched various distro's and came across, PC Linux OS, it was really cool, But i couldn't get it to connect Wirelessly, so i tried something else... the bottom line is i finally settled on SUSE Linux Enterprise Desktop 11, i seem to like it a lot.Ok.. now that introductions are out of the way
Background info: I've installed SUSE Linux Enterprise Desktop 11 on my Sony Vaio Laptop (VGN-NW15G) with no major issues, after a bit of mucking around, i got the LAN to Connect to the internet, after some more mucking around, i figured out how to get the WLAN to connect to the internet.MY Goal: To be able to Wirelessly Network my Laptop with My PC.so that i can access the files on the PC, From my laptop, and Vice Versa, but the important thing is to first be able to access the PC files from the Laptop.
NOTE: My PC has 4 Hard Drives (1 for the O/s, 3 Backups) they are all configured and Shared correctly for Networking and Wireless networking, and all the permissions are set correctly.Hardware and Software Environments:My Laptop : Sony Vaio VGN-NW15GOperating System : SUSE Linux Enterprise Desktop 11Wireless Capable, and has no issues Wireless Networking when running of a Hard Drive Loaded with Win 7 Ultimate 32bit, Therefore all Hardware is Compatible
My PC (Custom Built)
Operating System : Windows 7 Ultimate 64bit SP1
Motherboard: Gigabyte GA-X58-UD3R Rev1.0
[code]...
View 4 Replies
View Related
Sep 2, 2010
So, I am relatively new to Ubuntu (a few weeks in). I am running Lucid dual booted with Windows Vista at this point. I have installed the Mobloquer GUI for better privacy. That seems to be going pretty well, except that it is making it difficult for me to connect to the yahoo chat server. I am running Pidgin. The other servers I use (AIM, Google) use one IP address each for their chat connections and I have whitelisted those addresses. However, it seems that Yahoo uses a different IP address every time. Whitelisting whatever IP it tried last doesn't work. I tried to put in a range - with that, Mobloquer would not start up at all - something about an invalid IP mask.
I realize that this is the Ubuntu forum, not specific to Moblock (or Mobloquer) but when I google problems with Mobloquer the results are almost all here. So, I hope that those with knowledge will chime in anyhow.
View 3 Replies
View Related
Feb 9, 2011
So, now that I got http://bit.ly/h70Nnf sorted out, how come doesn't my Mobloquer show anything in the log. I'm used to Peer Guardian 2 in Windows and I know it has to show some more stuff than nothing.. Your help is sincerely appreciated cuz I'm so new to Ubuntu. FYI: Mobloquer and Peer Guardian 2 are IP blocking programs.
View 2 Replies
View Related
Nov 21, 2010
My problem with UBUNTU is that I can not use acer-wmi because I get this ERROR :
Code:
... so I can not use the acer_wmi . But this is not my only Problem :
It is most likely caused of the missing " Firmware " / Driver for my WLAN Card ( Internal ) . Currently I use Ubuntu 10.10 but I tested 10.04 too before 10.10 and it found my Card but not the Button .
So I want to know if there is any solution for my problem .
If it is important :
I use an Acer eMachines e525 with Windows Vista Home Basic ( Pimped up ) and Wubi . I saw a lot of people with simmilar problems they have it as only boot option .
View 9 Replies
View Related
May 8, 2011
After updating to kubuntu 11.04 natty, I have a problem with my internet-connection. The problem happens when I use VoIP-Software like Skype or Twinkle and also when using ktorrent.
When using the mentioned software, after 30-90 seconds the internet gets very slow. In f.e. skype, I can hear the one I phoned very badly.
I use kubuntu on a desktop-PC with a Linksys USB-Wlan-Stick. Detailed information is below.
Code:
uname -a
Linux pr1-desktop 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
[Code]....
View 1 Replies
View Related
Jan 18, 2011
I have problems with Mobloquer and Thunderbird or Evolution email. (Email is Gmail.)When i log in Ubuntu and open mail, mobloquer block "Google Inc". Okey then i click "Stop blocking this IP"..everything is working BUT when i reboot, same thing and just DIFFERENT "Google Inc" IP to block.What i miss?runehedit:got it solved with this: gksu gedit/etc/blockcontrol/blockcontrol.confIP_REMOVE="Google Inc"
View 1 Replies
View Related
Nov 12, 2010
I'm unable to get into my university's WLAN network. LAN works just fine, but sometimes it's quite convenient to be able to access stuff wirelessly. It doesn't seem to be a hardware problem, because if I configure my computer according to our computer department's instructions it works fine with Ubuntu (currently I carry around a stick to get into the Internet when I really need it and don't have a cable). Some info:
My device:
Broadcom WLAN controller on a Lenovo G560
My system:
OpenSUSE 11.3 64-bit
The drivers are installed, I can get into normal private networks, but have never managed to get into the university network except for with Ubuntu.
The university instructions tell me to use the following settings:
Security: WPA Enterprise
Authentification: TTLS
Inner Authentification: PAP
Username: My username
Password: Password
CA Certificate: Deutsche_Telekom_Root_CA_2.pem
In the KDE instructions, they tell you to write "anonymous" into the anonymous identity field, but in the GNOME instructions it says to leave it blank. In Ubuntu, I leave it blank and it works.
I've got the recommended settings, which also work in GNOME.
I'd ask the tech support here, but I am the tech support We've got it working with other systems, like I said, but not with SUSE, and I'm a SUSE fan.
View 9 Replies
View Related
Mar 23, 2010
For system calls, is blocking or non-blocking default in C? Simple question, just am not seeing the answer super quickly.
View 4 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Jul 30, 2011
yesterday I installed pulseaudio and pavumeter. This morning I couldn't connect to the internet anymore. I checked the settings but couldn't see any changes. I read the post at [URL]?t=370108 and I'm going to post the outcome of the instructions here:
1.) My Notebook is a Sony Vaio
2.) Wireless brand, model and chipset:
Code: ubuntu@ubuntu:~$ lspci -nn | grep Atheros
Code: 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
3.) Check interface:
[Code]....
View 9 Replies
View Related
Dec 25, 2010
I have a device that is working on modbus protocol andI have written a small program(with block TCP read method ) to read its registers via modbus protocol.my program is working very well but except those times that I unplug the Ethernet cable or turning off the modbus gateway during programs work.at this time my program stops on recv system call (if it reach this system call exacly when I unplug Ethernet cable or turning off the modbus gateway during programs work).I changed my source to work in nonblock TCP method, at this time with the same situation my program does not stop/block on recv system call but after pluging back the Ethernet cable or resuming the connectivity situation back it reads data incorrectly .this is my code:Quote:
#define DEBUG
#include <fcntl.h>
#include <string.h>
[code]...
View 5 Replies
View Related
Jun 23, 2010
If I have only 1 physical WLAN interface, is there some hackery that can be done so that it can be a client of an existing access point and at the same time also act as an access point for other clients? I have an existing 802.11g ADSL router, and I'm going to be building an HTPC which will have 802.11n. My laptop also has 802.11n, but at the moment it only connects at 54Mbps because thats what the AP supports. I'd like to be able to have the HTPC be a client of my ADSL router, but have my laptop be a client of the HTPC, so copying files to it will be faster.
View 1 Replies
View Related
Nov 27, 2009
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
View 5 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
