Ubuntu Networking :: WLAN Couldn't Connect To The Internet Anymore After Installing Pulseaudio And Pavumeter
Jul 30, 2011
yesterday I installed pulseaudio and pavumeter. This morning I couldn't connect to the internet anymore. I checked the settings but couldn't see any changes. I read the post at [URL]?t=370108 and I'm going to post the outcome of the instructions here:
1.) My Notebook is a Sony Vaio
2.) Wireless brand, model and chipset:
Code: ubuntu@ubuntu:~$ lspci -nn | grep Atheros
Code: 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
3.) Check interface:
[Code]....
View 9 Replies
ADVERTISEMENT
Jul 23, 2010
I left my laptop on stand by and today on the morning I could wake up my laptop so I turn it of the manua way. When I start again, I notice there is something going wrong It said to me I don't have internet. I check the modem and yes I have internet, I check the lan cable and it looks it works fine. So I thought it was the ethernet card that was bad. So I restar again and enter with Windows 7, and yes I have internet. So it made be one problem of my Ubuntu. I did an ifconfig and got the following
[Cpde]...
View 3 Replies
View Related
Sep 7, 2010
I just installed Ubuntu and I cannot connect to the internet. I am new at this I wanted to try it out before I restore my computer back to Windows. So I need to be walked through it all still trying to figure out where all the shortcuts and everything are.
View 9 Replies
View Related
Jun 3, 2011
Linux is what i'd like to learn, so Howdy to all and i hope to speak to you all regularly
in short, I started with Ubuntu Linux about 6 months ago, Didn't like it, i researched various distro's and came across, PC Linux OS, it was really cool, But i couldn't get it to connect Wirelessly, so i tried something else... the bottom line is i finally settled on SUSE Linux Enterprise Desktop 11, i seem to like it a lot.Ok.. now that introductions are out of the way
Background info: I've installed SUSE Linux Enterprise Desktop 11 on my Sony Vaio Laptop (VGN-NW15G) with no major issues, after a bit of mucking around, i got the LAN to Connect to the internet, after some more mucking around, i figured out how to get the WLAN to connect to the internet.MY Goal: To be able to Wirelessly Network my Laptop with My PC.so that i can access the files on the PC, From my laptop, and Vice Versa, but the important thing is to first be able to access the PC files from the Laptop.
NOTE: My PC has 4 Hard Drives (1 for the O/s, 3 Backups) they are all configured and Shared correctly for Networking and Wireless networking, and all the permissions are set correctly.Hardware and Software Environments:My Laptop : Sony Vaio VGN-NW15GOperating System : SUSE Linux Enterprise Desktop 11Wireless Capable, and has no issues Wireless Networking when running of a Hard Drive Loaded with Win 7 Ultimate 32bit, Therefore all Hardware is Compatible
My PC (Custom Built)
Operating System : Windows 7 Ultimate 64bit SP1
Motherboard: Gigabyte GA-X58-UD3R Rev1.0
[code]...
View 4 Replies
View Related
Jan 3, 2010
I installed Fedora 12 weeks ago and it was working like a charm.And suddenly, i can't seem to connect to the internet anymore.I tried booing to winxp and i successfully conected. I'm using PPPOE connection.And that's the error in the var/log/messages
Quote:
an 3 10:17:22 localhost NetworkManager: <info> (eth0): carrier now ON (device state 2)
Jan 3 10:17:22 localhost NetworkManager: <info> (eth0): device state change: 2 -> 3 (reason 40)
Jan 3 10:17:35 localhost NetworkManager: <info> Activation (eth0) starting connection 'DSL connection 1'
Jan 3 10:17:35 localhost NetworkManager: <info> (eth0): device state change: 3 -> 4 (reason 0)
Jan 3 10:17:35 localhost NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
[Code].....
View 6 Replies
View Related
Aug 31, 2010
connect my Ubuntu 10 edition to internet through nokia 5630 xpressmusic. also i am not at all aware of the commands used in ubuntu.. if any body having help file abount basic installation commands. install virtualbox inside Ubuntu10. i downloaded the package fro site.but it shows dependance error..
View 2 Replies
View Related
Sep 26, 2010
I have installed openSUSE KDE 11.3 on my notebook. Everything looks great, but I can't connect on internet. It looks like dhcp don't work. Wireless works fine, only auto eth0 don't work.
View 9 Replies
View Related
Apr 27, 2010
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
View 2 Replies
View Related
Sep 2, 2010
I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies
View Related
Aug 18, 2010
I am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)
So far i have tried:
Code:
But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?
Also will an AP allow access to the network although i don't have an IP from its DHCP server?
View 3 Replies
View Related
May 7, 2011
I have a problem on Ubuntu 11.04 64-bit. The wlan does not connect automatically on reboot, although "Connect automatically" is ticked in network manager. I always have to choose "Connect to hidden wlan", choose my config, enter my password, then connect. Once connected everything works fine. But it's kind of annoying to manually connect each time after a restart.
- hidden SSID from router
- mode -> infrastructure
- connect automatically -> ticked
- available to all users -> ticked
- Encryption -> WPA & WPA2 personal
View 7 Replies
View Related
Jun 20, 2010
I have a RedHat linux server box connected to LinkSys router through ethernet port. I've assigned a static IP to the Linux box, which is out of range with router's DHCP range.
The Linux box has Apache, JBOSS, SVN and several other services installed, but none of these services are accessible through the WLAN. However, SSH and SFTP are accessible from WLAN.
Another interesting observation is that if I open a browser on the linux box (by exporting the DISPLAY to Exceed on my laptop on the WLAN) and point the browser's address bar to localhost:80 or localhost:9080, then I can access these services!!.. So, I suspect that something is wrong with accessing these services from a client on WLAN and I am looking for a solution for the same.
View 3 Replies
View Related
Dec 11, 2010
recently I risked a look to the Linux world and I'm happy so far, but now I've got a Problem, I'm unable to solve by myself. I installed Mint (Julia) on my old Laptop to test Linux. The Laptop has a very old PCMCIA WLAN Card with a Realtek rtl8180 chipset. Everything seems to run perfectly so far with one exception: the WLAN doesn't find any Network to connect although the card and the driver seem to be installed correctly.
Here some code from the terminal:
Code:
lspci
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
[Code]...
View 1 Replies
View Related
May 17, 2011
I upgraded Ubuntu to 11.04 I can NO longer connect wirelessly using my BCM4312 WLAN Card. It connected with no problems before dist upgrade using Ubuntu 10.04. Im really not sure why I cannot connect. I cannot even see my router in edit wireless connections settings. I can however see my neighbours routers who are using WPA2 encryption. But I cannot see my router.
I have uninstalled and reinstalled The Broadcom STA proprietry wireless driver several times using Additional drivers. This did not fix my issue.
I am connected by ethernet at the moment so I do have internet connection.
View 4 Replies
View Related
Jan 1, 2010
i dled ubuntu 9.10 and i got it ready on ma pc but after the setup process is done i couldnot get it attached to my LAN or internet connection i use a DHCP router wich need no configuration as it was shown problem is even my acctivity lamp on da router doesnot give any activity light btw i got some records as
[code]...
View 1 Replies
View Related
Mar 1, 2011
I have Ubuntu 8.10 on one PC and Win7 on another PC. Now I connected both PC's via KVM-Switch and now I can't get an Internet connection with the Ubuntu PC anymore. The modem is working.
View 2 Replies
View Related
Jul 5, 2010
Since I have installed Fedora 13 it seems that I can't connect to WLAN APs which aren't secured by WPA. I'm surprised about the inserts to the messages logfile:
[Code]...
Most surprising insert for me: Jul 5 20:43:21 nbtobiaslnx NetworkManager[1328]: <info> Config: added 'key_mgmt' value 'WPA-PSK' Is this the reason for my problem? I use KDE and Network Manager for managing my networkconnections.
View 1 Replies
View Related
Nov 21, 2010
My problem with UBUNTU is that I can not use acer-wmi because I get this ERROR :
Code:
... so I can not use the acer_wmi . But this is not my only Problem :
It is most likely caused of the missing " Firmware " / Driver for my WLAN Card ( Internal ) . Currently I use Ubuntu 10.10 but I tested 10.04 too before 10.10 and it found my Card but not the Button .
So I want to know if there is any solution for my problem .
If it is important :
I use an Acer eMachines e525 with Windows Vista Home Basic ( Pimped up ) and Wubi . I saw a lot of people with simmilar problems they have it as only boot option .
View 9 Replies
View Related
May 8, 2011
After updating to kubuntu 11.04 natty, I have a problem with my internet-connection. The problem happens when I use VoIP-Software like Skype or Twinkle and also when using ktorrent.
When using the mentioned software, after 30-90 seconds the internet gets very slow. In f.e. skype, I can hear the one I phoned very badly.
I use kubuntu on a desktop-PC with a Linksys USB-Wlan-Stick. Detailed information is below.
Code:
uname -a
Linux pr1-desktop 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
[Code]....
View 1 Replies
View Related
Jan 29, 2010
My Ubuntu 9.10 (64 bit regular old desktop version) machine has two NICs, eth0 and eth1. eth0 does not connect to my router (and thus the Internet) automatically. I have to manually click on it in the NetworkManager applet after every reboot.
Internet connection sharing has also been impossible. I gave up trying to do that after about 2 weeks. I was simply trying to share my Internet connection with a Windows XP machine over eth1, but it never worked. I could ping one machine from the other, but couldn't get to the Internet from the Win XP machine.
Removing NetworkManager may be the ticket. Most of the tutorials for Internet connection sharing tell you to enter commands in the console. Maybe one of them will work once I remove the NetworkManager applet.
View 9 Replies
View Related
Nov 9, 2010
I have a ThinkPad x100e with a wireless card.Code:03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)my problem is that I can't connect to my wireless network with Gentoo. I've been running Slackware64-13.1 on this computer and now have Windows 7, Ubuntu and Gentoo installed. Slackware, Ubuntu as well as Windows 7 connect to the wlan without problems. I'm using the driver rtl8192se, the module is loaded r8192se_pci and is the same with Slackware and Ubuntu.
I've read many posts and found that other people experience problems with Realtek wlandevices as well. But I have no Idea how to get connected with Gentoo at my wlan. It looks like that the netbook is connected for a very short time, but when dhcpcd broadcasts for a lease the connection is already closed.
View 10 Replies
View Related
Jun 7, 2010
Lucid i386 Dell inspiron 1525 with 4695agn, iwlagn driver Just installed a new router, Netgear WNDR3700 Old inspiron laptop with Hardy installed connects fine to G wireless An Acer with Vista connects fine to G wireless My Inspiron with Lucid connected fine until I enabled WPA on the routers 5Ghz band. At that point I couldn't connect on any, 2.4 Ghz no enc, or the wired connection. The Windoze pc was connecting fine. Fired up the old Hardy laptop and it connected fine.
Now here's the weirdness!! As long as I had the Hardy laptop connected either wired or wireless, I could connect to the router with the Lucid laptop to unsecured wireless or wired. Soon as I turned off the old Hardy laptop, my Lucid machine could not connect? WTF? I then disabled security on the router and I could connect with my Lucid machine?
View 4 Replies
View Related
Jun 6, 2010
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
View 5 Replies
View Related
Jan 18, 2010
All of a sudden I couldn't watch movies on Hulu anymore, so I have just upgraded Debian from the Etch to Lenny, because I wanted to update to the newest version of Adobe flash. In Iceweasel under add-ons, it says that I have the newest (10.0 r42) version. The old one (9.0 r124) is still listed. It is listed as disabled, white version 10 is listed as enabled. I still can't watch movies on Hulu.
View 12 Replies
View Related
May 16, 2011
After installing Slack 13.37 on one of my systems while using my own (non-standard) kernel it refused to boot as the harddisk couldn't be found anymore. Investigation yielded that the ahci.ko driver wasn't loaded (but libahci.ko was). However I listed both ahci.ko and libahci.ko in the mkinitrd -m parameter so there had to be an error in the new /sbin/mkinitrd script. It turned out that a grep at the end of the script weeded out my ahci.ko module as the searchterm "ahci.ko" was already detected in the modprobe line for libahci.ko.
I decided to fix it in an easy way : I just prepend a "space" in front of the module name at the line where the grep is called :
[Code]....
View 2 Replies
View Related
Aug 1, 2011
I recently installed Fedora 15 x86_64 on my new AMD Machine and I'm quite pleased with things thus far.Here's where my problem comes. I mainly bought that machine to help me with Development. More specifically, Virtual Machines for testing purposes. I have installed Fedora 15 x86_64 as a qemu-kvm Virtual Machine and it's working.. for the most part. I am having a whole lot of trouble getting it to connect to the Internet.
My guess is the only way I'm going to reliably do that is to setup a Bridge. Yes/no? However, in order to setup a Bridge I need to disable NetworkManager and that where the fun happens. It completely disables my network connection. I'm probably missing something small, but I can't figure out what I'm missing. I've double checked my ifcfg-em1 multiple times(I've been trying for ~24 hours so far) and all the settings are as they should be.
I've turned NetworkManager off and stopped it(chkconfig and service) and turned network on(chkconfig and service). Theoretically I should simply need to turn off NM and turn on network and things should be fine. no?
Well, aside from adding:
ONBOOT=yes
NM_CONTROLED=no
to ifcfg-em1.
View 7 Replies
View Related
Feb 16, 2011
Trying to install 10.10 from USB onto my Dell Inspiron mini 10. I am able to boot into the USB, but I cannot connect to the internet - wireslessly or otherwise. When I plug the internet cable directly into the computer that does not work. I had to fidget with some drives to get the Network Manager to work, which it finally did, but it won't connect either - just keeps asking for the password.
View 1 Replies
View Related
Jan 28, 2010
so far i testet 4 wlan cards (prism, ?zytel?, realtek and another realtek) they all work without a problem with kubuntu. but with ubuntu they dont want to build up a connection to my router. it looks like the passphrase is wrong..he asks me after a short time to reenter the phrase. but the phrase isnt wrong(copy pasted) the phrase has some special characters but only '=' and a few '!'. so i doubt that that could be the problem im pretty sure there are more people out there who have the same problem. I hope someone knows a solution :/
edit: i did some searching and found this... seems to be a major problem[URL]...
View 4 Replies
View Related
Aug 13, 2011
I installed OpenSuse 11.04. To connect to the Internet, I use the script which connects to my Internet provider:
Code:
linux-aghn:/home/alex # cable-start
Using interface ppp0
Connect: ppp0 <--> /dev/pts/4
PAP authentication succeeded
[code]....
At this stage in another Linux distribution I am connected. In OpenSuse, when I start Firefox, it cannot connect. The problem is not in the browser, Software Management program also reports that connection is not available. ping 212.199.17.154 is successful. I tried to disable Firewall - doesn't help.
View 1 Replies
View Related
Feb 1, 2010
On this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
View 2 Replies
View Related
