Is it possible to make a personalized version of ubuntu livecd that autostart ssh after booting? I need to test if video card failure cause my computer to freeze.If that's too complicated or not possible, is there any other livecd that does that?
View 2 RepliesWhat's the easiest way to make things autostart in KDE? The only method I know is to make links to the applications and then put them in the KDE autostart folder. Last time I did that, I had a lot of trouble with not being allowed to make the links unless I was root. Is there a simpler way?
View 1 Replies View Relatedusually i run the file with
1. open the terminal (log in as root)
2. then just write sh Start-ServiceEngine from the folder it self.
i try to make auto start with this way :
1. create file in /etc/init.d/ name blah
[blah]
#! /bin/sh
sh /root/service-engine/Start-ServiceEngine
exit
[/blah]
2. changing the mod : chmod 755 /etc/init.d/blah but when i restart the centOs it seem run but with error on my program.
for the past couple of weeks, I have been booting from an Ubuntu LiveCD. Here's why: When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code: grub> find /boot/grub/stage1
Error 15: File not found So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.
At this point, I am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will.
So, I guess I just need to know how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder, or (hopefully) someone who can tell exactly what's going on from why I have posted and can give me instructions for fixing my problem. Also, here's a breakdown of how my hard drive is partitioned. Not sure why, but I thought this might be helpful: linky.
TLDR: How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition? After reading my whole post, is there any further insight you could offer that I may have overlooked?
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
I have a system without a cd reader so i dd'd the livecd iso (I'm stuck with 7.10) to a partition. I can boot the system with grub4dos by loading the kernel and ramdisk. Is there a kernel parameter I can append so I can change the keymap like I was able to by pressing F3 in the cd boot menu?
View 2 Replies View RelatedProcess and problem description:
1. downloaded ubuntu-10.10-rc-desktop-amd64.iso and burned to CD.
2. re-booted.
3. "ubuntu" is displayed center screen with five dots below text (sequencing white and red).
4. screen jumps to alternating horizontal bars (green & purple plus green & pink sections) about 1/4 inch high.
5. cd activity light stops blinking.
6. no standard desktop ever appears.
System:
- Asus A8N-VM CSM with integrated nVidia C51PV [GeForce 6150] display
- AMD Athlon(tm) 64 3200+ CPU
- 2.5GB DDR 333 MHz memory
Has anyone else run across this? Obviously, trying to convince a friend to switch to ubuntu using this CD would not be good.
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies View RelatedI have a NVIDIA Geforce 6150 LE video card and it is on the motherboard. I vaguely remember something on some site about nvidia cards, but can't remember what. It gets to the part where it says something like "Boot Ubuntu from the CD." I hit enter and it shuts my monitor off.
View 9 Replies View RelatedWhen booting from the LiveCd it starts to load but never loads! All it does is flash a _ icon and then becomes black!
View 9 Replies View RelatedI downloaded the CentOS-5.6-i386-LiveCD.iso and burn it on a CD, as usual. When booting, it does the automatic boot but then crashes, with "Buffer I/O error on device sr0, logical block 354800 (and more)". I am having the same problem with making a boot-able USB. I am not exactly sure what is wrong, I see two folders on the cd LiveOS and isolinux. I'm not sure if it is suppose to be like this, if the burning process when ok. I'm trying to set up a desktop on a pc (with AMD Sempron processor). This is very strange, I ruled out that it couldn't have been my computer (because my Fedora boot disk booted fine), my cd (because it is new and an entirely different brand), or the .iso (because I tested it in VirtualBox, which it booted perfectly).
Files in LiveOS folder:
livecd-iso-to-disk
osmin.img
squashfs.img
TRANS.TBL
[code]....
I have a Dell Studio laptop, which I am trying to make dual boot and in big trouble. These are the steps I completed.
1. Backedup all my important data on a USB drive.
2. Prepared a Ubuntu LiveUSB and booted in Ubuntu.
3. Used GParted tool to repartition my hard drive (320GB) as follows,
Partition 1 NTFS (Primary) ~50GB
Partition 2 NTFS (Primary) ~100GB
Partition 3 EXT4 (Extended)
Root EXT4 (Logical) ~20GB
Swap Linux-swap ~2GB
Home EXT4 (Logical) ~129GB
4. Accepted all these changes in GParted and restarted the machine.
5. Used VISTA installation disk to start VISTA installation on 1st NTFS partition (Partition 1).
-Everything was fine until now -
6. The VISTA installer took a really long time (around half hour) just showing copying files with 0% completion status message.
7. Somehow I got impatient and tried to cancel the installation.
Now, the problem is the system does not boot up even with my USB LiveCD or Windows VISTA installer. It just shows blank screen and nothing appears.
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
Coming from Windows. First installed Fedora 11 but lost network and haven't been able to restore network connectivity. Attempted to re-install but during the boot process it complained about creating a soft link to /dev/root (not sure what this is about). So attempted to install CentOS by booting from the LiveCD. Much nicer interface but have no install icon and there doesn't appear to be installation guide. How I can install CentOS?
View 4 Replies View RelatedI am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
My DVD drive has gone bad and with new Fedora 14 just launched I decided to install the same through the usb flash disk.
First I used dd: dd if=/home/prabhat/Download/Fedora-14-i386.iso of=/dev/sdb
It went on nicely and copied the iso nicely. But I could not boot with it.
Second time I tried livecd-tools: livecd-iso-to-disk /home/prabhat/Download/Fedora-14-i386.iso /dev/sdb1
It went on nicely, and finally declared something like - usb disk is not live .... But here again when I tried to boot it says MISSING OS. I checked the contents of the flash disk. It contained raw DVD iso image, one images directory, one syslinux directory. I checked the contents of the images directory, and I found it had the install.img. And yes, the /dev/sdb1 is bootable.
I followed the instructions at [URL] but whenever I boot with the "persistent" option, the Ubuntu splash screen will take forever to boot, and It's not reading the CD! How do I fix this? By the way, I'm booting 10.10.
View 1 Replies View RelatedI know you can make a custom livecd using remastersys, but is there an app within Ubuntu that would perform the same function without having to install a third party app?
View 2 Replies View RelatedI want to make a live CD for ubuntu, but upon getting the .ISO I found that the .ISO was 709MB, and my disc is 700MB. How could I precede in making this live CD? If I use some sort of over burning software, will the live CD work, and please recommend a software to do so if it does indeed work.
View 8 Replies View RelatedJust for the fun and learning experience I am working on a minimal install with Squeeze +IceWM. The goal is to make a livecd with a set of privacy apps - like Iceweasel with Tor/privoxy and some encryption tools. Everything is working out just fine, but I thought it would be very nice to have an installer. I read about the refractainstaller and refractasnapshot in this post, and thought they sound like a good solution: viewtopic.php?f=19&t=54635#p315738 However, the links seem to be dead and so were all the mirrors I tried. Does anyone know where these files can be found or any other easy way I can make Debian installable from a livecd?
View 14 Replies View RelatedRecently I have started looking into squashfs filesystems which are used by many LiveCDs. I see that the Debian Live Project also has a squashfs image of their LiveCD. I am wondering how to use that squashfs image to make a bootable USB LiveCD?
View 1 Replies View RelatedUbuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
i have ubuntu 10.10 installed in dualboot with win7 on a asus 1201n netbook. the first os in the first black screen boot menu is win7, which means that it is the default os to boot if i don't use the arrow down to ubuntu. well, i had enough experience with ubuntu to decide that i want to defaultly boot into ubuntu.
does anybody know how i change it ? [there is no menu.lst file in 10.10, so i didn't find the way to do it]
I tried to make script startup when booting but no response
This steps that i did, i made it in my pc and work but in another pc can't work
That i did in details
I don't know why can't see this script as start when booting
I have FC8 on my laptop and then I wanted to test Ubuntu 8 so I installed Ubuntu and it removed the grub loader of Fedora then I repaired fedora with DVD and then it removed Ubuntu Grub. So how can I have two OS in one grub loader.I found grub.conf file in FC but couldnot find it in Ubuntu.
View 3 Replies View RelatedI have successfully migrated my linux install to a new /, /home, /boot partition on my ssd. Everything works fine, except that it won't make the root directory on the right disk. When I change the root=uuid=<drive id> to my new drive everything is fine, but I can't automate that... in other words I have manually typed the uuid of my root-partition for about 100 times now and I am fed up with that how I can save the uuid of my new drive in the startup parameters?
View 2 Replies View RelatedI want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View RelatedI'm trying to set up Asus Eeepc for a my friend so she can listen to midwest irish radio,without me being there to switch it on . she can only switch the notebook on and off,that all she can manage.So i thought there must be a way to switch the notebook it does the rest for you.I know there is people out there who can work this out in no time at all.I do not know much about linux,just the basic,there must be (as in windows)a macro program that records and replays back actions
View 2 Replies View RelatedI am new to Linux and was wondering how to make dual booting Windows and Ubuntu from 2 separate drives work. I have dual booted from the same drive but never different ones. If I install Ubuntu on the second drive how will I configure the system to let me choose on start up?
View 3 Replies View Related