General :: CentOS Not Booting From LiveCD?
Jun 21, 2011
I downloaded the CentOS-5.6-i386-LiveCD.iso and burn it on a CD, as usual. When booting, it does the automatic boot but then crashes, with "Buffer I/O error on device sr0, logical block 354800 (and more)". I am having the same problem with making a boot-able USB. I am not exactly sure what is wrong, I see two folders on the cd LiveOS and isolinux. I'm not sure if it is suppose to be like this, if the burning process when ok. I'm trying to set up a desktop on a pc (with AMD Sempron processor). This is very strange, I ruled out that it couldn't have been my computer (because my Fedora boot disk booted fine), my cd (because it is new and an entirely different brand), or the .iso (because I tested it in VirtualBox, which it booted perfectly).
Files in LiveOS folder:
livecd-iso-to-disk
osmin.img
squashfs.img
TRANS.TBL
[code]....
View 14 Replies
ADVERTISEMENT
Jul 30, 2009
Coming from Windows. First installed Fedora 11 but lost network and haven't been able to restore network connectivity. Attempted to re-install but during the boot process it complained about creating a soft link to /dev/root (not sure what this is about). So attempted to install CentOS by booting from the LiveCD. Much nicer interface but have no install icon and there doesn't appear to be installation guide. How I can install CentOS?
View 4 Replies
View Related
Jan 20, 2011
for the past couple of weeks, I have been booting from an Ubuntu LiveCD. Here's why: When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code: grub> find /boot/grub/stage1
Error 15: File not found So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.
At this point, I am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will.
So, I guess I just need to know how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder, or (hopefully) someone who can tell exactly what's going on from why I have posted and can give me instructions for fixing my problem. Also, here's a breakdown of how my hard drive is partitioned. Not sure why, but I thought this might be helpful: linky.
TLDR: How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition? After reading my whole post, is there any further insight you could offer that I may have overlooked?
View 4 Replies
View Related
Jan 26, 2011
-I could use a hand in installing opensuse on my 2009 Intel Macbook
-I need to use a USB stick for the install, my optical drive doesn't work.
-I am trying to reformat my macbook to run 64-bit opensuse 11.3 instead of Apple's proprietary operating system, OS X
-So I started here: Chapter1.Installation with YaST
-And in this article, under section 1.1. Choosing the Installation Media, i found this sub-section: Booting the LiveCD from an USB Stick.
-So i followed those steps to create a bootable USB stick in Terminal, and i got an error in Terminal and was unable to go any further;
-this was the error in Terminal: dd: bs: illegal numeric value
Would anyone know what the error means, and what i should have typed instead? Is it because my USB stick is generic instead of being a specific type like a U3 stick?
View 9 Replies
View Related
Aug 17, 2011
I have been trying to create a live CD or DVD with kiwi, and following the instructions from Portal:KIWI - openSUSE All went well with the building and creation of the ISO image, but when I try to boot it I get:
Failed to mount ext3 clic container Failed to mount root filesystem if I press Alt-F3 (suggested in the terminal)the top most error is tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /read-only/fsdata.ext3 Couldn't find valid filesystem superblock. Something I did find was that it may not have permission to use tune2fs.I haven't done any fiddling with the template supplied with kiwi.
View 1 Replies
View Related
Oct 17, 2010
Is it possible to make a personalized version of ubuntu livecd that autostart ssh after booting? I need to test if video card failure cause my computer to freeze.If that's too complicated or not possible, is there any other livecd that does that?
View 2 Replies
View Related
Feb 17, 2011
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
View 1 Replies
View Related
Aug 12, 2011
I have a system without a cd reader so i dd'd the livecd iso (I'm stuck with 7.10) to a partition. I can boot the system with grub4dos by loading the kernel and ramdisk. Is there a kernel parameter I can append so I can change the keymap like I was able to by pressing F3 in the cd boot menu?
View 2 Replies
View Related
Feb 7, 2010
I am getting a "No devices matches MBR identifier 0x8c71ad6e!" message along with a reboot in 120 seconds message. This occurs after kernel load and at the start of openSUSE boot.
I have tried both the 64bit and 32bit downloads
openSUSE-11.2-KDE4-LiveCD-i686.iso
openSUSE-11.2-KDE4-LiveCD-x86_64.iso
I have checksum checked both images after download. I have attempted the install on CD and USB stick with both images and the result is always the same.
I've included a screen image on my site: No Devices Matches MBR Identifier | Badzilla
View 5 Replies
View Related
Oct 3, 2010
Process and problem description:
1. downloaded ubuntu-10.10-rc-desktop-amd64.iso and burned to CD.
2. re-booted.
3. "ubuntu" is displayed center screen with five dots below text (sequencing white and red).
4. screen jumps to alternating horizontal bars (green & purple plus green & pink sections) about 1/4 inch high.
5. cd activity light stops blinking.
6. no standard desktop ever appears.
System:
- Asus A8N-VM CSM with integrated nVidia C51PV [GeForce 6150] display
- AMD Athlon(tm) 64 3200+ CPU
- 2.5GB DDR 333 MHz memory
Has anyone else run across this? Obviously, trying to convince a friend to switch to ubuntu using this CD would not be good.
View 6 Replies
View Related
Nov 9, 2010
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies
View Related
Feb 11, 2011
I have a NVIDIA Geforce 6150 LE video card and it is on the motherboard. I vaguely remember something on some site about nvidia cards, but can't remember what. It gets to the part where it says something like "Boot Ubuntu from the CD." I hit enter and it shuts my monitor off.
View 9 Replies
View Related
May 10, 2011
When booting from the LiveCd it starts to load but never loads! All it does is flash a _ icon and then becomes black!
View 9 Replies
View Related
Apr 11, 2010
I have a Dell Studio laptop, which I am trying to make dual boot and in big trouble. These are the steps I completed.
1. Backedup all my important data on a USB drive.
2. Prepared a Ubuntu LiveUSB and booted in Ubuntu.
3. Used GParted tool to repartition my hard drive (320GB) as follows,
Partition 1 NTFS (Primary) ~50GB
Partition 2 NTFS (Primary) ~100GB
Partition 3 EXT4 (Extended)
Root EXT4 (Logical) ~20GB
Swap Linux-swap ~2GB
Home EXT4 (Logical) ~129GB
4. Accepted all these changes in GParted and restarted the machine.
5. Used VISTA installation disk to start VISTA installation on 1st NTFS partition (Partition 1).
-Everything was fine until now -
6. The VISTA installer took a really long time (around half hour) just showing copying files with 0% completion status message.
7. Somehow I got impatient and tried to cancel the installation.
Now, the problem is the system does not boot up even with my USB LiveCD or Windows VISTA installer. It just shows blank screen and nothing appears.
View 4 Replies
View Related
Nov 4, 2010
My DVD drive has gone bad and with new Fedora 14 just launched I decided to install the same through the usb flash disk.
First I used dd: dd if=/home/prabhat/Download/Fedora-14-i386.iso of=/dev/sdb
It went on nicely and copied the iso nicely. But I could not boot with it.
Second time I tried livecd-tools: livecd-iso-to-disk /home/prabhat/Download/Fedora-14-i386.iso /dev/sdb1
It went on nicely, and finally declared something like - usb disk is not live .... But here again when I tried to boot it says MISSING OS. I checked the contents of the flash disk. It contained raw DVD iso image, one images directory, one syslinux directory. I checked the contents of the images directory, and I found it had the install.img. And yes, the /dev/sdb1 is bootable.
View 3 Replies
View Related
Aug 14, 2009
I'm trying to create a CentOS based liveCD that mounts a NFS share and executes one script there. The NFS never mounts altough while logged I can mount it with the very same command that I use in the KS.
In the %post I have :
%post --log=/tmp/post.log --erroronfail
mkdir /mnt/nfs
mount -o nolock 10.23.1.1:/csc/RemoteHome /mnt/nfs
I added the --log in order to debug, but nothing is written in /tmp/post.log. I tried redirection on the mount command with >> /tmp/debug.log but this is not written. Maybe during the post sequence /tmp is RO ? Anyway, I tried with ifup lo, service portmap start in the %post, but doesnt change (I even have a service : command not found in the live cd creator output).
Here is the remainder of the KS :
lang en_US.UTF-8
keyboard us
timezone US/Eastern
[Code]...
View 10 Replies
View Related
Aug 19, 2010
i installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
View 1 Replies
View Related
Aug 19, 2010
i installed squid 2.6 proxy server on centos 5.4,squid performs services very nice but after reboot the system.it shows a just black screen written with " GRUB_ " and held the boot process,tell me what should i do ?
View 1 Replies
View Related
Nov 3, 2010
I've installed CentOS lot's of times, but I've never had an issue like this before. It's just a black screen, and all I see is a mouse. I see some drive activity, but I gave it a good hour and it's just sitting there. Not sure what to do here or what's causing the issue. There were no problems during the install. I'm trying to install it on an old Dell PowerEdge 1900 server. Edit: If I go to the console, top is showing X and gdm taking 10+% of the CPU and there's a high load. Which is odd because this is a fresh install..
View 3 Replies
View Related
Feb 13, 2009
Im trying to set up a CentOS 5.1 LiveCD on my PXE/tftp server and am having problems. I can currently successfully install CentOS 5.1 using my PXE server but can not get it to load the Live CD.
I tried following this How To but it doesnt cover a Live CD just a rescue mode.
http://wiki.centos.org/HowTos/PXE/Rescue_PXE My entry is /tftpboot/pxelinux.cfg/default for the live cd is this:label centoslive kernel centoslive/vmlinuz0 append ks=http://ip.to.liveCD.contents/CentOS/5.1/ks/live initrd=centoslive/initrd0.img ramdisk_size=8192 selinux=0 text
[Code]...
View 4 Replies
View Related
Aug 12, 2010
In my CentOS Bible, written by Timothy and Christopher it refers to a one button that you can install CentOS with one button from the LiveCD, or from CentOS running from the CD and install to the hard drive? I pressed everything and nada, as most everything does not function it seems. What am I missing that may go along with preparing these Dell 2650's?
View 9 Replies
View Related
Apr 7, 2011
I have centos 5.5 on vmware, and I'm trying to boot up from the live cd so that I can fix some issues that I'm having. I have vmware pointing at my cd drive, I mount the cdrom and when I ls, it lists the contents of the cd. But when I go to reboot centos, it doesn't boot from the cd and just boots normally.
View 2 Replies
View Related
May 21, 2009
I checked a couple of locations:[URL]... and none of the files listing checksums do so for the LiveCD ISO neither md5 nor sha1. Being a "trust but verify" sort of fellow. . .
View 3 Replies
View Related
Nov 29, 2009
I using only Livecd CentOS 5.4 and my system crash in day about ~3-5 times , so I tired and want to know why this happen. (before I used live-cd 5.3 about 3 weeks and this problem still was. info : Linux livecd. localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 athlon i386 GNU/Linux.I load system perfect and If I just browsing then I will have crash after 5 hours latter , but if I install wine , xmms,lame,xmms-mp3,k3b-mp3,flash-plugin and after installing software I will look movies from internet , or lisining music on xmms mp3 format - my system UPTIME max will be ~30 minutes or less..And I want to ask, or in Live-cd I can start Firewall ? Becouse I think it's not started and then I try to ENABLE its looks like not responding.
View 1 Replies
View Related
Jun 26, 2010
What are the system requirements for the CentOS 5 liveCD?
View 1 Replies
View Related
Jun 11, 2011
I'd like to download Cent 5.6, but I'm a bit confused on which ISO I need to download. I can't use any of the torrent files since my company FW won't allow it through. So, should I download the Live CD or ISO 1 through 8? Can I install the Cent from the LiveCD? If I decide to download ISO 1 through 8, how do I then combine them?
View 5 Replies
View Related
Aug 23, 2009
I followed the instructions here: [URL] and then here: [URL] and installed the necessary packages. But when I try building the minimal image as a test, I get lots of errors, as seen in the attached build log. There are lots of things that don't seem to work. Is this project at a state where it's not currently usable? Or do I have a problem with my system configuration? I was running at root.
[root@localhost test]# LANG=C livecd-creator --config=centos-livecd-minimal.ks --fslabel=CentOS-minimal
Filesystem label=CentOS-minimal
OS type: Linux
Block size=4096 (log=2)
[code]....
View 4 Replies
View Related
Jul 8, 2010
This might sound like a really daft question but how the hell do I install CentOS 5.5? I cant find any guide how to install the dam thing. I ve downloaded "CentOS-5.5-i386-LiveCD-Release2.iso" & burnt this to a CD. I then booted my server form this CD. I see a very nice colourful screen which says "Automatic Boot in 10 seconds". After 10 seconds nothing happens. I then rebooted the server & this time I hit the enter key, I now see a menu with the following options:
Boot
Boot (text mode)
Network Instillation
Memory Test
Boot form local drive
If I try the "Boot" or "Boot (text mode)" options nothing happens. Selecting the Network Instillation appears to boot the install I then see a blue & red screen asking me to choose a language I picked English hit OK selected UK as the keyboard type hit OK Installation ethod...... Ive chose Local CDROM but the message says: The CentOS cd was not found in any of your CD drives.
View 3 Replies
View Related
Oct 4, 2010
after download CentOS-5.5-i386-LiveCD-Release2 i did not found install option ? how can i install it ??? on my laptop ?
View 3 Replies
View Related
Jan 24, 2011
I'm looking for a good manual "howto install software and personalize CentOS LiveCD 5.5".
View 1 Replies
View Related
