I want to make a script that specifies how much ram to launch minecraft server with, so far I have:Code:read $ra
java -Xmx$raM -Xms$raM -jar minecraft_server.jar noguibut I knowthat that won't work because there is the M at the end of the variable $ra, is there a way I could make this work? I believe that the M at the end is required to specify the measurement unit.
When I open the minecraft.jar file with p7zip on Linux, I can't delete the META-INF folder.
This is the error:
Error: /home/davide/.minecraft/bin/minecraft.jar is not supported archive
System error: Operation not permitted
i'm looking for a way to set up my Bukkit server (Minecraft) with a mysql server on Ubuntu 10.04LTS
View 1 Replies View RelatedI have 2 computers on the same network that i need to link together to transfer files 1 is a web server the other is a minecraft server. the problem is that the file transfer will be constant as the minecraft server will constantly updates files on the web server and I dont want it to go to the router then to come back to the web server. I want to add a second network card to each computer and link them together and use this second connection to transfer the files is it possible?
View 2 Replies View RelatedToday, I was trying to compile and install a minecraft mapper with the program "make". I navigated to the directory in terminal and ran make. It found the make file and begins to work, then spits an error and stops. To be specific, this was the error:
Code:
cats4gold@computer:~/Downloads/cartograph-linux$ make
make -C src/
make[1]: Entering directory `/home/cats4gold/Downloads/cartograph-linux/src'
g++ -c -pipe -O2 -Wall main.cpp -o main.o
In file included from main.cpp:16:
[Code]...
I'm trying to fully automate a Minecraft server, and I decided to use Ubuntu 11.04 on this computer. The computer I'm using for it is an old computer (it's the old family PC, it's about 5 years old (and running amazingly now that I've formatted the hard drive (compared to how it used to run))) so it won't run the Unix environment (or something like that) and runs the Gnome environment instead.
Anyways; the server auto-starts when my computer turns on (my computer also automatically turns on). Now all I need to do is have my computer auto-shutdown at 12:00AM as well as enter the command "stop" into the running terminal. I plan to later add more commands (such as automatically welcoming people to the server when they connect, but that's not important right now and I'll likely be able to figure out if I can get this working).
This is the command I'm using to shutdown the computer:
sudo shutdown -P 24:00
However, it doesn't work. First of all, I need to enter my password, so I need some way to have the shell file enter my password for me whenever the terminal asks for it. Second of all, it just plan doesn't work, even if I enter my password (like, the countdown doesn't appear). As for entering commands into the terminal, the only way I can think of is:echo "stop" But the problem is that doesn't work because it wont enter into the running terminal (and I don't know how to do that).
I recently loaded up my old powermac g3 with debian 6.0 PPC, and it seems to be running quite good. I control it using ssh from my windows 7 box. I installed default-jre, so I could run the minecraft server on there.
I've got two questions: I installed Openvpn, but I'm a bit confused on how to use it.. I want people to be able to connect to my vpn network over the internet, what configuration should I use, and could someone maybe link me a decent step by step tutorial?
secondly, when I tried to launch the server, it tried to generate a new map, but this is taking ages! on my desktop computer, it only took two seconds, but after over half an hour, it only got to 20% of "preparing spawn area" what could be wrong with this? Any reason why the java virtual machine would have performance issues? I have no clue.. I haven't tried copying over my smp map from my windows box yet, and launching that.. but I doubt performance will be any better. (my windows 7 machine is hosting at the moment for about 10 people)
I need a command to tell the alarm to start the playback of amarok on the morning, I also need a way to be able to see lyrics in amarok, and last, any tip on how to make the amarok launch faster? is takes like 5 min!
Amarok ver 2.3.0
Ubuntu karmic koala
I know usually, on other systems, skype automatically starts. But not on my Ubuntu. How to make it to start?
View 3 Replies View RelatedIf I am using LXDE or another non-Gnome desktop and want to use Nautilus as the file viewer it needs to be launched with the --no-desktop option (so nautilus does not load it's desktop image under the other DE).
I know there is a way to make it so whenever nautilus is launched it will not load the desktop (even if you do not pass the --no-desktop argument) but I do not recall how I did this last time! I believe it was a gconf value. Anyone know what this setting is/how I can accomplish what I am looking to do?
I'm using a program called easystroke to invoke commands from mouse gestures - typically to launch an application. 'gnome-terminal', for example. If I already have a gnome-terminal window open, and I invoke the gnome-terminal gesture, I'd like to be setting focus to the already running instance, rather than spawn a new instance, which is of course what happens now. (I am actually more interested in this for my gmail chrome app shortcut, and other larger apps.)
I'm very new to ubuntu and linux in general, but I was hoping there might be a nifty command I could wrap around my launch command that would produce this behavior. (I'm imagining some kind of singleton app list keeper program that consumes my command line, checks if it's already in the list, transfers focus to the running process if it is (and if that process is still running), or else spawns a new process and then adds it to its list using the the command line as a key.)
Asked this on Jul 21, and didn't get any satisfactory answers. Thought i'd ask again before i switch to Ubuntu or go back to Fedora: Has anyone gone to software.opensuse.org: Download openSUSE 11.3 and actually chosen "Installation Medium" as "4.7G DVD", "Direct Link", "32 bit PC", hit the "Download DVD" button and gotten the file "openSUSE-11.3-DVD-i586.iso" which is not 49.0MB?
I mean, the steps above are not rocket science, and not much chance of making mistakes, so i'm not sure how i can get a download popup which specifies that the file is 49.0MB file, if it's not actually that size?
How do I make an application launcher in the panel launch more than one application? Is there some sort of a symbol I type between the apps in the command line? Like ;
View 1 Replies View RelatedI found my mldonkey-server curiously could not launch after rebooting To confirm my suspicion, after the following command:
Code:
root@Mldonkey:~# /etc/init.d/mldonkey-server start
Starting MLDonkey: mlnet.
I run
Code:
root@Mldonkey:~# telnet localhost 4000
Trying ::1...
Trying 127.0.0.1...
[Code]...
I have looked around almost everywhere for a way to run Minecraft on my PowerPC with Maverick, but nothing seems to be working. I'm not sure if it's a problem with getting Java on here (which I can't seem to do without it saying you have to have some other Java file there, or something) or a problem with liblwjgl.so (which is apparently not compiled correctly for PPCs).
View 3 Replies View RelatedCan i run Minecraft with ubuntu 11.04?
View 4 Replies View RelatedI was running Ubuntu Server 8.04 LTS and using flashpolicytwistd from Google Code to support flash-based telnet on two websites. After upgrading to 10.04 flashpolicytwistd no longer starts.
If I do the following to manually start flashpolicytwistd:
Code:
I get this response:
Code:
If I then immediately do the following:
Code:
I get this response:
Code:
I also cannot locate the process with ps -e, nor can I confirm that it is listening on its assigned port (default is 843, I changed it to 4005).
No errors show up in the logs. I also tried uninstalling and reinstalling with no change.
This problem has been confirmed on the Google Code issues page for this program on Ubuntu 10.04 LTS: [url]
Have found nothing useful Minecraft has crashed!
Minecraft has stopped running because it encountered a problem.
I'm trying to run minecraft.jar. The download page states that the .jar is executable, but when I try to run it it's as if it was a tarball rather than an executable file. I don't want to extract anything, I want to run it. I tried the instructions on the website: Code: java -Xmx1024M -Xms512M -cp Minecraft.jar net.minecraft.LauncherFrame but that didn't work, and I got this error:
[Code]....
I am trying to download and play minecraft and i cant for the life of me get java so is there and apt-get's I can use to find java?
View 5 Replies View RelatedI have a small stats program that I am using to get some sys stats. I am trying to launch this program on a particular port, using the xinetd system deamon. Here is what I am doing ...
[Code]///
So I recently got a VPS from hostgator and am now looking to get xwindows or xorg installed so that I can launch firefox from my VPS, the issue is that I don't want to install a complete desktop environment. Is there a way to accomplish this? I have enabled X11 forwarding in ssh and in the putty session, but continue to receive errors about displays.
View 1 Replies View RelatedPrior to posting this I entered search arguments, "Busybox," then "initramfs" to attempt to find another user who may have experienced the same thing; if the solution is imbedded in the message threads, I must have missed it. On hand is a Ubuntu Server 8.04.3 installer CD. What works: Installs to a Mac Pro under both Parallels, and then under Fusion both were successful first try.
Install to a newly purchased 2 gig Acer Aspire One seems to have succeeded, but upon launching from Grub, Busybox/initramfs intercepts and halts the launch with an error I don't understand:
Starting up ...
Loading, please wait ...
Check root = bootary cat /proc/cmdline
[code]....
The new Acer-PC Aspire One was partitioned into four 80 gig partitions using the Paragon software to do the partitioning. XP is on the first, and Ubuntu Server on the next 80 gig partition. Install was "successfully" done from a Lite-On external CD/DVD over USB.
During the install I changed the default name from Ubuntu to something else (probably a bad idea), and I naively entered "/" root to answer the mount question (finding nothing to tell me what to do). Ubuntu required a disk driver choice from a long list - finding no reference or guidance as to what to enter, I naively entered IDE Generic, and it took (I guess it "took").
FWIW the Ubuntu installer didn't require me to indentify the mount entry or the disk driver during installs on my Mac (Fusion/Parallels).I did connect the Internet during the install. I did checkoff/install LAMP during the install from CD. Goal: To use Joomla in a mock server environment.
I'm trying out the old, free version of Minecraft, and I cannot seem to be able to move. If I press F9, I sometimes get an options screen, and sometimes not. I have F9 bound to scale in Compiz, though I had the same problem with Metacity. If I press any of the movement keys, I do not move, though I can use my mouse. I'm using sun-java6-plugin.
View 1 Replies View Relatedi cant get minecraft to work on kubuntu i found a thread that helped install a different java but i am unable to complete the install because i can not press ok for some reason.
View 2 Replies View RelatedI'm kinda new to all of this so I believe there's a simple solution for what I need I just don't know how it's done.
So I've configured a vsftpd, ftp server and enabled the anonymous user, therefore when I do
Code:
ftp://my_location.com
a directory like view is displayed in my web browser, corresponding to /srv/ftp where the files for the anonymous account are kept. Now I've made a little web page and I've copied it there, and can be executed running main.html so the address to access the web page would be
Code:
ftp://my_location.com/main.html
My problem is that I don't want anybody to have the possibility to see the directory like display so I'm wondering if when someone does ftp://my_location.com can't this be redirected so it will do ftp://my_location.com/main.html instead?, making the display of files and directories impossible from the ftp://my_location.com
I am trying to launch a java web application automatically when the server starts from rc.local. Logged in as root with a console I can call the jar directly "java -jar /apps/web/fitapp.jar &" everything starts no problems. Once I add the same command to rc.local and reboot the webapp fails to start. Re-directing the output shows "Unable to access jarfile fitapp.jar". I've tried setting java environment variables (using in the rc.local, and in root's profile (bash), but that error persists.
View 2 Replies View RelatedI downloaded an old save that i used when I used to use windows, i switched over to ubuntu and i want to use it again, but i have no clue where Minecraft stores its saves, i know in windows it was the "appdata" folder.
View 3 Replies View Relatedeach and everytime I close Minecraft window it puts my 1024x768 15" screen from 75hz to 60hz and this occurs EVERYTIME I close Minecraft, I have tried uninstalling then re-installing Minecraft.
View 1 Replies View RelatedI wasn't sure weather to post here or on the minecraft forums.
OS: Ubuntu 11.04 x86
CPU: Intel core i5 sandy bridge 2410M
GPU: Intel HD 3000 (Integrated)
RAM: 8 gigs ddr3
So I got my new laptop a few days ago,loaded up ubuntu.After starting up minecraft to connect to my server I realised that the fps was going from 50 to 1 and back to 50 again EVERY SECOND so obviously this isn't normal.After a quick google search every one on windows seems to have no problem. There are no results for linux.
Edit: Yes I know why the are you using a x86 os on a computer with 8 gigs of ram? At the time of installation all I had was no internet access and a live cd from LUD with ubuntu on it