So I recently got a VPS from hostgator and am now looking to get xwindows or xorg installed so that I can launch firefox from my VPS, the issue is that I don't want to install a complete desktop environment. Is there a way to accomplish this? I have enabled X11 forwarding in ssh and in the putty session, but continue to receive errors about displays.
View 1 RepliesThis is a fresh install of 11.2 KDE-4.3.1.
After reviewing all of the 11.2 Milestone 64-bit DVDs, Milestone 1 - 8 - I was always able to launch Firefox from Thunderbird in search of add-ons or an html link.
It stopped working in RC1, RC2.
I thought this was resolved for openSUSE 11.2. The problem still exists!
Now, thinking the problem was with Thunderbird 3.0.4b. I navigated to Configure Desktop --> Personal Settings --> General --> Default Applications:
Changed Email Client from KMail to Thunderbird
From within KMail I can launch Firefox. However, Thunderbird 3.0.4b does NOT launch Konqueror nor Firefox 3.5.4 !!
In addition the Thunderbird 3.04b Help does NOT work.
Could the setting of Default Applications be broken in KDE-4.3.1 " release 6 " ??
I'm sure I cannot be the only one experiencing this at home???
I made an error by downloading and installing a new version of firefox. I do not manage any more to install the flash! I would also play World of warcraft but I have a little problem. I know it is not precise. But my english teacher would we make a discussion of anything in English, for 30 minutes. Thus it would be cool if anybody can contact me on <snip.> We could discuss about these problems with skype.
View 7 Replies View RelatedI'm trying to set up the Firefox extension 'Web Developer' to view the source of a webpage with gedit.
I've done this previously on Windows with notepad just by adding the command 'notepad %1' to the appropriate entry in 'Web Developer'.
In Firefox under Linux Mint 9, I tried replacing that command with 'gedit %U' but nothing happens. I can launch gedit from a terminal, but how do I get it to run from another application?
I installed f12 few days back. A pop up came which mentioned '336 new updates available' and I opted 'install only security updates'.
Now in the boot screen 3 options come instead of 2:
1. Fedora 2.6.31.6-166.fc12.i686.pae
2. Fedora 2.6.31.6-127.fc12.i686.pae
3. Windows
I am able to boot into both versions of fedora, but I cannot launch firefox it says-'your version of SQlite is too old and the application cannot run'. How do I correct the screw up. Should I re-install the whole thing....? why is it showing as 2 versions....? I installed yumex recently, is it the reason.....?
Noticed this last night, when I try and launch either Firefox or Thunderbird using the GNOME menu or the quick launch icons, it fails. I am able to launch them both from the command line in a terminal. Other applications seem to launch fine, so I'm at a bit of a loss where to begin taking this apart... I do get a task in the task bar that says "Launching Firefox", but then nothing comes up. The same thing happens with Thunderbird. That task just goes away. Another odd thing - following a reboot the launch buttons work once. If I close them, they won't launch again unless I run them from a terminal window.
View 3 Replies View RelatedI am launching my web browser from start up.
How can i detect that the wireless network has been detected and connected before the
browser launches?
Whenever im logged into my Ubutu Desktop at home remotely from work i cannot seem to launch Firefox by clicking on any of the shortcuts.Seems the only thing that lets me lauch it is by opening a command windown and typing "sudo firefox".
View 8 Replies View RelatedMy problem is that I can' t launch my PHP files in Firefox to see them local.
I have Apache, PHP and MySQL installed.
I also moved my web folder to /var/www but still can't see them.
I can see the default html file: "It works!" but not my files.
Firefox is still asking what it should do with the file, if it should open or save it. But I can't see them.
When I click on a hyperlink inside a PDF, email (Thunderbird), or other document (ex. AbiWord, LibreOffice) Firefox attempts to launch and it shows in the gnome2 panel (in the window manager with all the other applications) but when I click on it in the window manager to un-minimize/focus Firefox the browser crashes. Odd thing is this is only a problem if the browser is not yet open. If I have previously launched Firefox then click an external link it opens in a new tab just fine. I upgraded from Firefox 4 to 5 and the problem persists. I've only recently noticed this so it could be the result of something I did (installed/uninstalled) though I don't know what I could have done. Or, maybe I never noticed because I almost always have an open browser window.
View 1 Replies View RelatedI just installed Ubuntu 11.04 and suddenly when I click on email links in Firefox, Thunderbird isnt launched to write an email. How do I correct this?
View 2 Replies View RelatedI have a problem concerning about launching Firefox from NIS accounts. But it works perfectly if is started on terminal by the the local root account.
I have several hosts that's connected to a NIS server. When I tried to launch Firefox from one of these hosts, I got no response (Case 1 below). Here are the scenarios:
Case 1 - Fail to launch Firefox as NIS user: I login as NIS user account on the host, then I tried to launch Firefox by typing "firefox" on the terminal. But then I got no response from the terminal (the web browser didn't appear on the screen).
Case 2 - Success to launch Firefox as root: I login as root on the host, then I tried to launch Firefox by typing "firefox" on the terminal. The browser has appeared on the screen.
Case 3 - Success to launch Firefox as NIS user: I login as NIS user account on the host, then from a terminal, I login as root (using "su"), then I tried to launch Firefox by typing "firefox" on the terminal as root. The browser has appeared on the screen. Then immediately, without closing the browser window, I opened a new terminal as NIS user, then I tried to launch Firefox by typing "firefox" on the terminal as NIS user.
I am using Firefox 1.5.0.9 in RHEL 5.0. I have a application which needs to load some jar files to the firefox browser, for which I am adding the path in LD_LIBRARY_PATH in ~/.bashrc.The issue is when I launch the firefox through a shortcut, the LD_LIBRARY_PATH is unset, and it just sets it to Firefox specific libs.Additionaly if I run firefox through command line it sets it perfectly fine, and appends the Firefox libs to the already set LD_LIBRARY_PATH.
View 1 Replies View RelatedSo I just installed 32-bit Squeeze. I've done exactly two things since booting into the first install: pt-get install gtk+2.0, and ./firefox, so unless gtk did something, this might be an easily fixable problem with Debian itself. After installing gtk and trying to run firefox via command line, it tells me
Code: Error: cannot open display: :0 I googled a bit and couldn't come up with a solid solution, but the problem seems to be around other places. Any idea how to fix this?
I got Thunderbird 5.0a2 Beta because it had the file that runs it in there, but I can't find it anywhere in the Firefox Nightly Build one. There's also no config file in there either, and I don't want to replace my Aurora 6.0a2 Beta with the very unstable Alpha until I try it out. I would try it in the Virtual Machine but it'd take too long to set it all up.
[URL]
I downloaded the .bz2 file and Archiver extracted it for me. I remember in Slackware you just use installpkg on .bz2 files... Or was it .gz... I forget, anyway, how can I run Nightly-Build? Run-Mozilla.sh opens my Aurora browser.
I am a newbie in Linux and have only been recently using it. I have faced a problem with my the firefox browser launch. Recently there was a update (to generic version 2.6.32.24) after which the browser fails to start. It gives the message starting Firefox web browser and then dies off. I tried searching for some already posted answers but couldn't find much.
View 4 Replies View RelatedWen I am on the desktop I have to put the mouse on the top bar in order to see File, Edit,View, Places, Help.when I launch firefox it takes over all the screen/desktop.Is this the way unity supposed to be ?
View 2 Replies View RelatedToday, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies View RelatedI have installed CentOS on my system.I am unable to locate 'Disk Druid'.Kindly suggest the way to launch it.
View 2 Replies View RelatedWhat is the best way to lauch bash script on user logon and logoff?
View 1 Replies View RelatedAfter several site:centos.org searches on Google and not finding anything remotely related to this question, I ask, how do I update Firefox 3.0 to Firefox 3.5 without losing any of my settings, history, bookmarks ,etc.?
View 4 Replies View RelatedI would love to auto-start tomboy at startup. How can I do this ? [Moderator edit: fixed Subject so nobody would expect an automatic Lunch. Is that the same as a free one? ]
View 2 Replies View RelatedI had recently reinstalled Kubuntu after breaking it for the n-th time and downloads will no longer open from the Downloads window of Firefox. Instead, it brings up a dialog with the title Launch Application and asks me which application I should open it with. This seems to happen all of the file formats I have tried; namely pdf, zip, deb, and png. This did not happen from before the reinstallation.
View 4 Replies View RelatedI found my mldonkey-server curiously could not launch after rebooting To confirm my suspicion, after the following command:
Code:
root@Mldonkey:~# /etc/init.d/mldonkey-server start
Starting MLDonkey: mlnet.
I run
Code:
root@Mldonkey:~# telnet localhost 4000
Trying ::1...
Trying 127.0.0.1...
[Code]...
I have a small stats program that I am using to get some sys stats. I am trying to launch this program on a particular port, using the xinetd system deamon. Here is what I am doing ...
[Code]///
I'm kinda new to all of this so I believe there's a simple solution for what I need I just don't know how it's done.
So I've configured a vsftpd, ftp server and enabled the anonymous user, therefore when I do
Code:
ftp://my_location.com
a directory like view is displayed in my web browser, corresponding to /srv/ftp where the files for the anonymous account are kept. Now I've made a little web page and I've copied it there, and can be executed running main.html so the address to access the web page would be
Code:
ftp://my_location.com/main.html
My problem is that I don't want anybody to have the possibility to see the directory like display so I'm wondering if when someone does ftp://my_location.com can't this be redirected so it will do ftp://my_location.com/main.html instead?, making the display of files and directories impossible from the ftp://my_location.com
I am trying to launch a java web application automatically when the server starts from rc.local. Logged in as root with a console I can call the jar directly "java -jar /apps/web/fitapp.jar &" everything starts no problems. Once I add the same command to rc.local and reboot the webapp fails to start. Re-directing the output shows "Unable to access jarfile fitapp.jar". I've tried setting java environment variables (using in the rc.local, and in root's profile (bash), but that error persists.
View 2 Replies View RelatedI was running Ubuntu Server 8.04 LTS and using flashpolicytwistd from Google Code to support flash-based telnet on two websites. After upgrading to 10.04 flashpolicytwistd no longer starts.
If I do the following to manually start flashpolicytwistd:
Code:
I get this response:
Code:
If I then immediately do the following:
Code:
I get this response:
Code:
I also cannot locate the process with ps -e, nor can I confirm that it is listening on its assigned port (default is 843, I changed it to 4005).
No errors show up in the logs. I also tried uninstalling and reinstalling with no change.
This problem has been confirmed on the Google Code issues page for this program on Ubuntu 10.04 LTS: [url]
we are using firefox-3.0.15 from the CentOS-Repository and the adobereader plugin from the adobe-repository. We have a curious problem with adobereader-plugin in firefox.When a pdf document is displayed via the plugin, i.e. within a tab in firefox, all input fields are disabled. I cannot enter a search string or fill in fields. The cursor and page up/down keys are also disabled. But when I configure firefox to open pdf documents with the external acroreader, everything works fine.
Additional notes:* We are just migrating from SuSE. Some user profiles are working as expected without problems. Unfortunately, I was not able to figure out the important files: I traced all of firefox' file operations on the user profiles, but there are no significant differences between working and non-working profiles (I just compared filenames, not content).* the same adobe-plugin works with firefox 3.0.15 from mozilla.org* I also set up a clean i386-Centos 5.4 from original CD, SELinux disabled, updated and created standard user. I only added the adobe-repository. The same effect, no search avaible.
This is really odd - all of a sudden, my firefox says "Firefox can't find the server at www.google.com" , and my pidgin will not connect saying host not found.However, I am typing this on the same computer using Opera. his is absolutely insane. I have no idea what caused it.. command line nslookup works great, and resolves everything.But firefox and pidgin will not resolve anything.
The only odd thing is this in messages:
Sep 8 12:07:41 tklaptop NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed
Sep 8 12:07:41 tklaptop NetworkManager: nm_ip4_config_add_nameserver: assertion `nameserver != s' failed
[code]....