Ubuntu :: Lost Boot Option - TrueCrypt Takes Up MBR
Nov 14, 2010
I have a dual-boot setup with Windows 7 and Ubuntu 10.10. I used TrueCrypt to encrypt my drive, but in doing so I lost my Ubuntu boot option (as TrueCrypt boot takes up the MBR). So now I'm trying again, using TrueCrypt's option of multiple OS installed on same drive. At the moment, it won't let me do that since the Grub boot is on the same partition as the Win7 bootI. In a nutshell, I need to move Grub to another partition so that I can load from that boot option once I <esc> from the TrueCrypt boot. created a new partition for Grub, but don't know how to move it. My partitions as they stand now are:
[code]...
Does anyone know how I can move Grub to sda4? Or if I'm totally on the wrong track here?
A Microsoft anti virus program (Security Essentials) cleaned out a bunch of problems in Windows XP and now I don't have the double boot option any more. What do I change to get Ubuntu option back? OH, I also had to do a checkpoint restore prior to that but it was after I had installed Ubunto (I think). Which leads me to ask....how do I identify the Ubuntu disk space I allocated at install time? I can't seem to find it.
I installed Maverick alongside Windows 7. Then I upgraded Maverick to Natty, removed and reinstalled the latest kernel and ubuntu-desktop using Synaptic Package Manager. But now GRUB does NOT show any option to boot into Ubuntu Natty.
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
I had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
I am running Ubuntu 10.10 with all updates, and I have a 1tb external hhd I had a 850gb true-crypt file on the external hhd, I had to reboot the computer. whenever I reboot the computer I always dismount the true-crypt drive, and when I logged back into my computer the true-crypt file on my external hhd is gone and it shows the extra free space as well,
I have not done any writing to the external hhd so I am hoping the file "should" be recoverable. I don't know any really easy and good data recovery tools for Ubutnu, It would be easier for me if their is a gui program, I can manage using the terminal.
I have been using truecrypt to mount a partition on my computer for a few months now. Yesterday I tried to access it and it failed, with the following error:" mount: you must specify the filesystem type "
When creating the partition, the filesystem type was set to ext2. Apart from yesterday, I have not accessed this partition for a number of days now, and have done nothing to the operating in system in the ways of changing settings and such for a good week.
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
Ref; Ubuntu 10.04 new clean installation, fully updated. I have set sharing for some folders so they can be seen on my windows network ethernet. However the sharing option is lost when I next turn on the computer. Can I make the sharing permanent?
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
I am thinking of installing Ubuntu on my machine, and I may need to still keep windows 7 around for certain games/apps. I want to do a full disk encryption using Truecrypt. As I understand, Truecrypt is compatible with both linux/windows/OSX, and has an option for a "hidden operating system."I want to Install both win7 and ubuntu, with ubuntu as a hidden OS. I have watched tutorials on ..... showing the method for creating a hidden OS for Windows, in this tutorial the second volume was created from the first volume and was effectively a clone of the original OS. Basically what I am asking is---- Is it possible for a hidden volume with a bootable version of Ubuntu Linux to cohabitate on the same drive as windows?If so, are there any howto's/tutorials you could point me to?
I am having trouble getting my laptop set up the way I want it. I want to install Fedora 13, using Ext4 encryption, and I also want to install Windows 7 encrypted using TrueCrypt.
On boot, I would like to have Fedora 13s GRUB, offering me the two OS choices. If I select Fedora, then Ill get the cool graphical decryption screen, and if I select Windows 7 Ill get the TrueCrypt boot loader prompting me for the decryption key for the Windows 7 partition. Can anyone give me instructions on how to get this set up?
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ==============================[code].....
I've been using lucid since the pre alpha and I don't know why but I think it kept getting slower and slower to me until I've noticed "Windows" for god's sakes starts up faster than lucid! I've looked for some suggestions but nothing paid off. I've made a boot chart for my boot. I've noticed mount.ntfs-3g is taking too much time but how to stop it. My fstab is
After I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.
I recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.
i have a desktop that had had vista on it forever and i decided to install ubuntu on the 10gigs i had free for the longest time so i installed ubuntu but i did a stupid thing in my opinion and installed grubboot loader on the windows partition now when i try to boot vista it takes me back to the bootloader and i need to be able to use both vista(grphicswork) and ubuntu(networking) i cannot loose my vista files by re installing vista
I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .
I'm trying to run a logging server with encryption but rsyslog takes 100% of the memory on boot. This only happens when these two sets of lines are both in the rsyslog.conf
Code: $ModLoad imtcp $InputTCPServerRun 10514 and Code: $DefaultNetstreamDriver gtls
It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code: fsck from util-linux-ng 2.17.2 udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
I would like to install Ubuntu on an HP Laptop, but they have taken up the whole disk with 4 partitions. I have removed Linux partitions and made an extended one in it's place creating new UUIDs before, but i am worried that windows will not recognize the new partition.
This is kind of cross post from the 10.10 beta forum, but since that thread went by without a solution, forum (and thread) are locked and this problem still exists, I'll try again.
When I reboot my machine, it seems to go pretty quickly. However looking at the log it seems that most everything is running after about 8.6 seconds, and then USB starts loading up. The first log entry regarding USB comes at 32 seconds, second one at 62 seconds. The keyboard starts working at 84 seconds and the mouse at 166 seconds.
Note, this same system was running 9.10, 10.4 and various other distros I tested without such problems...
I've removed all hubs, everything is directly connected to the computer. code...
Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.
Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?
Some notes about my hardware: Intel Core2Duo 3GHz 4GB Ram Sata2 On this screenshots you can see both drives in comparison, the ssd is much faster.
reason is that the slack11 server in question was running for more than 150 days non stop. but due to a long power failure i had to shut down the ups yesterday and so the server too. anyway, i rebooted everything and somethings didn't quite work like i remember them to work from the last reboot (i.e. without anything that would alarm me).. ie. rc.syslog takes a million years (about 5mins+) to process during the bootup. i have no idea why, from then on boot process continues fine.
the only thing that might be remotely related is that recently i installed ulogd in order to log the firewall to a different file. i decided to start my rc.ulogd directly after the rc.syslogd start in rc.M. now, it doesn't seem to have any effect if i comment out the startup of rc.ulogd... rc.syslogd will still take ages to process during boot. if i comment out rc.syslogd from rc.M then booting will proceed at the expected speed and once i login, and start syslogd manually it will fireup quickly... i have tested this configuration in a slack13 box i have recently setup as a router-gateway and it worked fine there.. no prob with syslogd...
Basically when I login back from a suspend or after I boot the pc, the wifi takes 30seconds to a minute before it starts to connect. This makes it very annoying to have to wait for no reason.
Basically the issue is caused by the wifi not having a script to search for a network after a suspend.
HP Pavillion DV9000 Fresh install of Maverick 10.10
I've tried to install 11.04 on my Macbook Pro (5,4) today. I had two drives in the machine, an SSD as my main drive, and an HD. I installed rEFIt before attempting to install Ubuntu. I moved my Snow Leopard install to the secondary HD & made sure I could boot to it. Then, I used the live CD & gparted to clear the 1st drive (the SSD), create the swap space, create the Ubuntu partition, and launch the install, where I used what I had just created on the SSD. The install completed okay (but with no option to select where the GRUB installer went, like some tutorials tell you to look out for). This seemed to go okay, so I went to restart at the end of the install, but the machine didn't come back up.
Instead, the power came on & I could hear the drives, but the screen stayed black, the battery light flashed a load of times really quickly (too quickly to count, but at least 10 times), and then the machine let out 1 long beep and stayed on the black screen. I forced it to power down & tried again, and just got a black screen, the battery light shining steadily, and no beep. I forced it to power down again, and got the same, then again, and got the same, and then a 4th time, which actually allowed me to boot. And this has been the pattern since then. I shut down, and my first attempt to restart gets me the flashing light and the beep, with the black screen. I try 3 more times to power down and restart, and just get the black screen. Then, *every* time on the 4th time, I'm allowed to boot.
The same routine will be gone through the next time I power down and try to restart. I've tried totally clearing the disk in gparted, restoring the OSX install from TimeMachine, everything I could think of, but all to no avail. Finally, thinking that maybe the OSX install I had safe on the secondary HD might still be okay (looking at it in gparted showed an EFI boot section & everything), I opened up my MBP, swapped the drives around so that the HD is now the main drive, and the SSD the secondary, and renamed the drives so that the primary HD is now called 'Macintosh HD' and is first in the list of drives that appear when I manage to boot each 4th attempt. But, to my great disappointment, I still got exactly the same error. Can anyone offer any advice on how to:
1) Get my machine booting to a safe Snow Leopard install on the (now primary) HD? 2) Safely install Ubuntu on the (now secondary) SSD?
Obviously the first is a top priority, as I need my machine in order to work! Then I can concentrate on moving my dev environment to Ubuntu, which I've been dying to do for ages.
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
