one of them is a TV with an HDMI input. The login screen shows up on the tv, so if someone is watching a movie, I have to pause it to switch inputs and login. Other than that, everything is fine. How do I get the login screen to show up on the main monitor?
View 1 RepliesI've been working my butt off all day now trying to get the nvidia drivers installed and then (the hard part) get dual screen to work properly with them installed. Finally I've gotten to the point where both of my screens are working perfect but now the login screen is on the second monitor instead of the first monitor for some reason I do not know.
Here's my xorg.conf:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
Identifier "Default Layout"
[Code]....
I have 2 monitor on and Nvidia FX5200 set up as twinview
Monitor 1 is an old Sony CRT @ 1280x1024
Monitor 2 is a Visio HDTV @1920x1080
I have setup Monitor 1 to be the primary using nvidia-settings but the GDM login keeps sowing up in the second monitor ; before the HDTV I had a CRT TV @ 1024x768 and all was good. My theory is that GDM determines the center of the Screen (both monitors together) and then centers on that monitor. If this is true then how may I override this behavior and force the GDM login to show on my primary monitor?
I have a laptop connected via HDMI port to different external displays throughout the day. I have configured the displays (Settings > Displays) to turn off the laptop display and set the external display as primary. However, this setting only takes effect after login. Thus, I am unable to see the login screen greeter on my external display because I close the laptop lid, so I am logging in blindly to a gray login screen background.
he issue I am facing is that when I start the laptop with an external display connected, the greeter only appears on the laptop display. The gray login screen background image spans both laptop and external displays and my mouse pointer appears on both displays, so I know both displays are detected and configured as dual displays. But, I am guessing, the laptop display is set as primary while the external as secondary.
I would like to know if there is a way to dynamically switch the greeter between the two displays, regardless of which one is set as primary and secondary. Or, is there a way to configure the system such that if there is an external display connected via HDMI, then it is set as primary, and if no external display is connected, then the laptop display is set as primary?
I have searched all over the net and this forum to no avail. I read a post which required copying the user's ~/.config/monitors.xml file over to /var/lib/gdm/.config/ but this caused my laptop monitor to be turned off at login even when there was no external display connected.
Hardware: Acer Aspire 8730G, Core 2 Duo T9900, 8GB RAM, Nvidia Geforce 9600M GT.
Software: Debian 8.4 Jessie, Gnome 3.14.1, Gallium 0.4 on NV96 (I am assuming this is the Nouveau driver)
Contents of the /etc/X11/xorg.conf file which I generated with the command "Xorg -configure" as root in console mode:
Code: Select allSection "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code] ...
I suppose I will continue to login without seeing the greeter on my external display.
i have installed xubuntu desktop on my Ubuntu PC. But now the login screen and the bootsplash screen are showing Xubuntu logo etc . How do I fix this?
View 3 Replies View RelatedI am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies View RelatedI'm running 10.04 and whenever i go to the login screen, the username and password window is on the wrong monitor. I'm also using an ATI Radeon HD 4850 if it makes any difference.
View 2 Replies View RelatedMy OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies View RelatedI've recently installed Debian v8.1 and installed Nvidia driver 340.46. In nvidia-settings I am able to enable my second monitor and enable it/set it's position..etc. My second monitor is not being detected in Debian Display and is 'on' but only showing a black screen. I've tried researching and implementing various 'fixes', but I'm not having any luck.
I'm running dual GTX 570's with a monitor plugged into one each (DVI). I noticed in my xorg.conf under Section "Screen" I have an option "MultiGPU" "Off"; would this be part of the issue?
I've tried:
- purging all nvidia drivers and re-installing
- installing different versions of nvidia drivers
- add nomodeset in grub
I tried to install yo install Mac4Lin theme on Ubuntu 10.04 to transform visual style to Mac following this tutorial: [URL]
But when I tried to install Global Menu, but it didn't work so restarted machine. But after booting Ubuntu Logo shows while loading and after that Blank screen appears with a cursor and nothing happens.
I tried to uninstall theme from recovery mode but didn't help.
I install Fedora 13 from live CD to harddrive. after that i install KDE desktop. It works properly but after 2-3 days when I open my linux box then only Gnome only come there is no KDE selection at login screen.
View 1 Replies View RelatedI have recently installed Ubuntu 10.10 and it's working fine. The only problem I have is that grub is not showing and I automatically come across the login screen.
View 2 Replies View RelatedI tried to open the Open the Laptop I found the I could not find my Login Screen, I can watch my mouse scrolling around and when hit power key show me restart, herbinernate .etc, I tried to log in into console by pressing ALT+CNL+F4, and when typed startx it showed me following error
Fatal Server error:
Server is already active for display 0
If this server is no running remove /tmp/.X0-lock
and start again
Xinit: Resource temporarly unavailable (errno 11): unable to connect to X server
Xinit : No such process (Errno 3): server error
We've just installed debian xfce lxde....after all this time to get it....when we boot up to the login screen it keeps saying wrong uder name or password
View 7 Replies View Relatedwhen I boot and login to a fresh install of Ubuntu, everything goes fine, the login screen appears, I login. Then the cursor appears on a black screen. This is normal. Then when the desktop should appear, on the very left edge of the screen, about 5 pixels in size, you can see the panel and the rest of the desktop. But I stress, You still see the cursor. In this small area, you can right click as you, even click on the menu and it will come down, you can see it. I can click on Ubuntu SC and the cursor will turn to a loading symbol. But then nothing again. I can press Ctrl + Alt + F2 and terminal will come on fine. So far, this has happened on a live CD of Maverick, A live USB of Maverick, A Natty Narwhal Fresh Install, A Maverick Fresh install, A Karmic Old Install and That same Karmic After going through a Distro upgrade via Ctrl + Alt + F2 to 11.04. I've gotten all the updates for all of them (A slow, bandwidth wasting process), and this doen't happen on other computers, even ones with lower graphics cards then mine. Additionally, on the same computer on a seperate partion, I can load my main Maverick just fine, Indicateing that it can't be a hardware problem. After searching across the internet, I'm at loss to an answer.
View 4 Replies View RelatedI installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP.During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost.I removed all "zend-server" like stuff from "Add Remove Software" screen.
Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php)via terminal. Apache installed correctly and started workeing again ok on localhost.n again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".I shut down my pc thinking everything is ok now.
Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me baloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore.I remember one thing thating reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
Message:GNU GRUB version 1.98-1ubuntu5
I used the Monitor setup to indicate that my widescreen monitor is rotated 90 degrees to the left, to make it long for editing code, but the login page still does not rotate. I am assuming this is something simple, and probably a user defined option since my user is likely the only one with the monitor rotated, as there is just my user defined, but there are the other system ones, including MySQL. I am running Ubuntu 10.10 upgrade from 10.04.
View 3 Replies View RelatedI have a dual monitor setup with the primary on the left and the secondary on the right. When the login screen comes up after a reboot for instance, the login options such as user selection are on the secondary (right) monitor. How can I change this?
View 9 Replies View RelatedWhen I start my system its getting booted through LAN and it showing login screen after I login it shows only black screen. Whether is may by Video adapter problem?
This problem came after I run a Perl portscan program, this script just scan all the ports from 0 to 65535 and reports which port is open and closed.
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have been searching this forum and google extensively for the last few hours, and I cant dig up anything useful. I have a very weird problem:
Install Fedora 12 from livecd on a widescreen monitor:
- Using Nvidia 96xx drivers for my Gforce2 MX
Everything runs fine at this point. Connect old 17" flatscreen and no network: Login freezes for about a minute after username selection, no password prompt, no mouse movement, no keyboard response, after timeout I return to login screen before username selection .. and can repeat this or.. At that point (or before that point) I can ctrl+alt F2 to 'terminal' screen, login works fine.
init 3, login as root
startx
Works fine then, resolution is %^# tho, and cant change it at that point due to errors I get. I'm convinced the problem has nothing to do with my X configuration tbh. Booting from the LiveCD on this configuration works fine. I am tempted to think it has something to do with my GDM, but as my knowledge is limited, I cant figure it out. If I reconnect the widescreen, it all works fine ...
I have two monitors attached to my video card. Primary monitor has a resolution equal to 1280x1024 and second has 1920x1200. My gdm login screen always appears on the second monitor even if it is switched off. My question is how to force gdm to show login screen always on primary monitor with resolution 1280x1024? I use Ubuntu 10.04.Now I'm ready to modify gdm sources if there is no such option in configuration files.
View 1 Replies View RelatedI am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies View Related1. Is there a way to change the broken glass/monitor background on the login screen???
2. I have tried to login as root, but it will not accept the password, but if I login with my user name and need to change things that require root privileges the password works fine.
I worked a little back in 05 and 06 with FC4 and FC5 but nothing until now..
I've got my data disk partition like this:
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 256G 74G 169G 31% /data
When i run the command du -hs * on /data it tells me I used 538GB. How is that possible? Is it possible to get the right amount?
I have benn using ubuntu on an old laptop to run a samba server and a torrent server and it has been working fine till a few days ago when it stopped letting me write any files to the disk, So i tried deleting some of the files i no longer needed to free up some space and the disk usage didnt decrease so i checked it out using the disk usage analyzer and it says its full but i know for sure its not.
View 9 Replies View RelatedMy ~/Desktop is generally kept empty.
Yesterday on start resume from hibernate, it looked as if my encrypted home directory was unmounted; or at least instead of my $HOME contents I got a bunch of files related to this.
I rebooted the system, and since then my desktop has been rendering icons for every file in my home directory, but not updating the icons until the next reboot, if I change anything in $HOME while it is running.
I opened the gconf-editor and checked: the box for using the home dir as the desktop is not checked. I even tried toggling it and the option that controls drawing the desktop on/off in every possible combination. Nadda. The only thing that works is turning off drawing the desktop.
When I try to connect a projector to my laptop (already running) and hit the fn+f7 (the designated button for switching screen), nothing happens. I see "no source found" on projector screen and my laptop screen works perfectly. Now if I restart the laptop with the projector connected, I see all the intial booting messages on the projector screen (not on my laptop), then the gnome login screen appears on both the projector screen and laptop (when the login screen appears on laptop it looks like it has lower resolution than my usual laptop resolution). But immediately after I log in, my laptop screen goes blank, and projector screen becomes the only active screen.
If I restart without the projector, again all normal operation on laptop screen is restored.
I feel like I am missing some very silly options. Any help is appreciated.
Here is the output of xrandr when the laptop is connected:
Code:
Here is quick fix I did for HP Proliant servers where landscape shows wrong temperature eg:
root ~ # landscape-sysinfo
System load: 0.12 Temperature: 8 C <----- WTF
Usage of /: 0.2% of 808.13GB Processes: 214
[code]....