Ubuntu :: Install On HDD And Then Move It To Another Computer?
Mar 7, 2011
I want to install Ubuntu on a hard drive and move the hard drive to another computer.The reason I need to change it is becuase the computer i'm installing it on doesn't have internet or a cdromI want to install it on a better pc and then install the hdd on the other pc.Will it cause problems when I try and boot the computer when i replace the hdd as it won't have been installed on there originally ( I don't know if it installs drivers during isntallation)
View 9 Replies
ADVERTISEMENT
Mar 30, 2011
I have installed ubuntu desktop on my computer using wubi and its running great but I am about to get a new computer and I dont want to reinstall, reconfig and setup everything again.. the steps of moving my wubi install to the new computer
View 2 Replies
View Related
Sep 21, 2010
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies
View Related
Nov 22, 2010
I have just put together a new computer using an Intel i3-550 64 bit processor, and installed Windows (first), then Ubunutu 10.04. A separate /home partition was created. The hdd in this computer is formatted ext4.
Now I want to move my /home partition from my old 8.04 computer (32 bit, formatted ext3) which also has a separate /home partition.
Both are connected to a lan, but so far I have not been able to connect from one to the other.
I have done lots of googling on this and am astonished at the apparent complexity involved. There seem to be issues involving whether or not the /home partition in the old computer is in use, user permissions, and I don't know what all else.
Assuming that neither the ext3 on the old and ext4 on the new, nor the 32 bit on the old and the 64 bit on the new are not issues, how do I go about moving the /home from the old to the new? If possible, I would like to use a GUI rather than the command line, but if it is necessary to use the command line, please specify where one needs to be located in the file hierarchy in order to give the designated commands. I am not very knowledgeable about using the terminal.
View 9 Replies
View Related
Dec 22, 2010
On my old computer I have Ubuntu installed with all my nessecery environment installetion
I want to install Ubuntu on my new computer.How can I store the old environment (from the old computer) and restore it in my new computer ?
View 1 Replies
View Related
Jan 16, 2011
Can i move the entire HDD with the installed 64 xubuntu from one computer to another.
Will it be any problems ,i use the os system just to run my game servers.
Extra is lampp and some Databases ...
will it intsall drivers automacicaly .
I just want to know if its possible to do it ,
View 4 Replies
View Related
May 13, 2011
Will the installed and configured GNU/Linux system continue to work 100% if I move an HDD with it to a completely another machine? With another CPU platform (from Intel to AMD), another RAM (from DDR2 to DDR3), and other things that will differ.
View 1 Replies
View Related
Apr 27, 2011
i have a samsung sgh-j700 mobile phone and want to move music and photos from phone to computer and vice versa. im using ubuntu 10.10 ( i think? got free with ubuntu user)
is there any way to get this phone to be able to work on ubuntu?
View 3 Replies
View Related
May 10, 2010
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
View 3 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Jun 30, 2010
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
View 8 Replies
View Related
Sep 19, 2010
For Ubuntu 10.04 LTS / Gnome 2.30.2.
I have two applets on my Gnome panel -- NetworkManager Applet 0.8, and Klipper (it works better than Glipper) -- that I want to move.
HOWEVER, right-clicking the panel icons does not enable me to move these applets, as follows:
- NetworkManager Applet 0.8 does not include a Move item in its list of options.
- Klipper displays a long list of Klipper options but no Move option.
How I can move these items to new locations on the Gnome panel?
View 6 Replies
View Related
Apr 13, 2011
I been using ubuntu wubi on my gateway notebook for a few months now and I am ready to clean windows all my computer and only use ubuntu. the question is do I have to reinstall everything from the ground up?? can someone please give me some tips! it will take me weeks to setup everything again
View 1 Replies
View Related
Dec 28, 2009
I've moved an OpenSUSE disk image to a new system and it boots fine to console mode. Is there a command I can run to re-detect and set all of my hardware settings (video in particular)? I've seen some references to running hwinfo on an individual object basis.
View 1 Replies
View Related
Jul 17, 2010
I am using openSUSE 11.1. I recently installed an additional hard drive since running out of space. New drive up and running, used Yast Partitioner successfully.
2 questions as follows:
1) New drive still has Windows XP on one of its partitions..Can I easily implement/set up for dual boot?
2) More importantly, I need to move root ("/") of file system to new drive "sdb" since more space available but not certain correct way to do this
Below are listings I think are relevant:
View 6 Replies
View Related
Dec 2, 2010
I had a Win7 laptop with Win7 installed on the single internal drive. Attached to this is an eSata external drive.I installed Suse on the external drive. The install is good. I have enabled the Win7 OS in GRUB.When the eSata is plugged in I am able to boot and choose which OS I want.When the eSata is unplugged, the boot fails with the following message:
Code:
GRUB Loading stage1.5.
GRUB loading, please wait...
Error 21
I assume, what I need to do is to move the GRUB install to my internal drive.How do I do this? Indeed can I do this?Or can I re-enable the Microsoft BootLoader and tell this bootloader to load either OS?
View 2 Replies
View Related
Feb 8, 2010
i used klamav to scan for virus. yes, klamav from the repository. the scan said it had found possible virus. ok so i removed them from /usr/lib. then i realized kalmav just removed important components to be able to boot 9.10 properly. my desktop is broke!! so what do i do? use klamav to scan another install of 9.10 and try to move the removed components from the new install to the broke?
View 5 Replies
View Related
Dec 9, 2010
I have a Wubi install of 10.04 in my C: partition. I had given it 20GB of space but over the months my C: has become almost full, so I need to move the Wubi install to another partition (say E. I looked around for instructions on how to do it, but I could only find instructions for grub-legacy (that ask you to modify C:/ubuntu/disks/boot/grub/menu.lst) and not grub2 (which doesn't have menu.lst) used by 10.04.
how to move a 10.04 Wubi install to another partition in Windows is appreciated. Kindly note that I'm not trying to remove Wubi and convert it to an actual installation, but rather simply move it to a different location in Windows.
View 8 Replies
View Related
Sep 1, 2011
somehow I got posted before I got my message written. I posted my complete question in the next post
View 2 Replies
View Related
Nov 25, 2010
Is there a place where I can download KDE 4.5 and install it in 13.1 without having to move to current?
View 5 Replies
View Related
Jun 15, 2011
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
View 4 Replies
View Related
Feb 26, 2010
I came in this morning only to find that the Intel Core2 hyperthreading Dell machine is dead. It appears the processor is fried.
I have a new white-box X2 system that I will replace the dead Dell with. The X2 (AMD) does not have a hard-drive (HDD) so, I will simply put the SATA hard-drive into the PC.
Some of you may know how to do this, but I don't know where to begin after I get the Hard-drive in. (I know how to move a Windows configuration from one PC to another and handle it as it begins to blue screen (BSOD), but I don't have a clue with Linux)
This system was built with GRUB. At the very least, I expect the GRUB boot managet to surface on the display. But, what next....
I was testing an OpenSuse setup as a server. Nothing fancy and NO applications added. The only customization was the MB's LAN card and the display was set at 1024x768. I had 2 users, root and myself. What would you do? Is there some boot time options that I should follow?
View 9 Replies
View Related
May 24, 2010
I just got a new laptop and installed 11.1, and I want to move my swap file to a 8GB SD card I have. It seems to run very fast, so it will improve swapping speed. I created a swapfile with Partitioner, and I can delete the existing swapfile with GParted during a reboot - but I'm afraid I will make my system unbootable by doing that - don't I need to first tell OpenSuSE what swapfile (on the new sdb) to use? I'm pretty sure it will detect the new swapfile automatically during boot, but it might choke on a missing (old) swapfile.
View 6 Replies
View Related
Jul 18, 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local
then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
View 4 Replies
View Related
Aug 25, 2010
Ages ago I installed Linux on a "spare" 40GB disk and I don't remember how, but that disk is where I still boot the computer from, in Bios it's listed as a primary master and HD0.
Over the time my installs moved to the "main" disk where it is now Suse 11.3 alongside Windows.
I want to get rid of that original "spare" disk altogether, physically take it out, but don't know how to move the bootloader to the "main" one.
I'm confused by all the options offered in Yast Boot Loader Location menu.
Can I just tell it to put itself into a custom boot partition and point it to dev/sdb, the current designation of the "main" disk?
Would I need to edit Grub as well? I figure the current "sdb" would be called "sda" after I take the old disk out. Would it be safe to simply rename /sdb entries, things like /sdb4 to /sda4 and so on?
Additional question - I used to play with Win7 demo, deleted that now, but its loader still pops up when I boot into Windows with their "earlier version of operating system" menu. Their offered solution is to run "mbrfix" from a WinXp recovery CD.
My question - what would that mbrfix do to the Linux bootloader and how can I get it to point back to to Grub afterwards?
View 9 Replies
View Related
Jan 6, 2011
During install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
View 6 Replies
View Related
May 10, 2010
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies
View Related
May 3, 2011
What is the correct/safe way to move from upstart to systemd? I originally installed upstart in 11.3 and have now upgraded to 11.4. Having successfully upgraded to 11.4 I tried to use yast2 to install systemd and systemd-sysvinit onto my running system. Yast correctly identified that upstart should be deinstalled as a prerequisite for installing systemd-sysvinit.
After the install of systemd the system wouldn't shut down, and on a reset the system reported many systemctl/start service timeouts on things such as mounts and ttys. Eventually the system started an X-windows KDM login, but there were no console ttys and mounts were missing. I used X/kdm to login to root - phew! - I restored / from an rsync backup I'd made prior to the changes, so I'm back in business with upstart. I'd like to tidy up and move to systemd - I going to have a nose around myself, perhaps I will try switching back to sysv init and then going to systemd - but I have to wait for the machine to be idle before I experiment, any info in the mean time would be great.
View 3 Replies
View Related
Aug 13, 2011
I am runnig WinXP and OpenSUSE 11.4 on dual boot.Generaly i am using SUSE, XP only for UpNP Media Center(server) to watch movies stored on my computer on TV via STB.For this i am using TVersity for wich i not found yet Linux alternative - or better say - i found it but is too heavy for my PC(P4 1.6 Mhz, 768 MB RAM, an dinosaur from Nvidia Vanta with 64 MB RAM)But this is not a part of my question.My question is how to transfer(copy, move...?) files from SUSE to WinXP?A large files like avi, mkv, mostly movies.I solved this to copy them on USB and then from USB to Win.This is a very slow proces because my PC have only USB 1.0And before asked me - all files are legaly downloaded from paysites.From SUSE, partitions(disks), folders and files under WinXP are visible but is not possible to copy files on them - acces is denied.Is there any way to do this?Suse is insatlled on LVM - /root/home/swapI am interesting ONLY to copy files from SUSE to Win, not at al from Win to SUSE.Code:
Directory: /home/janez
Sun Aug 14 07:53:26 CEST 2011
janez@linux-cia6:~> su - root
[code]...
View 5 Replies
View Related
Aug 25, 2010
I wonder if anyone can help me. A little background, I wanted to move my xp install to a bigger hard drive. I used Saikee's method and worked fine (as usual). My machine was a dual boot system, the xp partition was with little space so I get rid of my vista install, deleted its partition. That went fine also. Rebooted directly to XP.The problem is as follows:
a) In order to increase the size of my xp partition (old machine, athlon64 1gb of RAM) I moved my data partition to the left in order to have unallocated space near the xp partition. That was successful, I rebooted and everything was fine.
b) I run again Gparted and increased the size of the partition. Gparted told me the process was successfully applied. I rebooted.
c) after post I get the following error "error reading disk, press ctr-alt-del". I did it like five times and I get the same message.
d) With my xp install disk I tried fixboot and fixmbr and nothing changed
Since I have the original hd, I did it again, and the same thing happened after resizing xp partition, before the resizing process I was able to boot normally. I used Gparted live cd v 0.6.2 and as far as I recall I left "adjust to mib" option
View 5 Replies
View Related
