Will the installed and configured GNU/Linux system continue to work 100% if I move an HDD with it to a completely another machine? With another CPU platform (from Intel to AMD), another RAM (from DDR2 to DDR3), and other things that will differ.
View 1 Replies
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI have just put together a new computer using an Intel i3-550 64 bit processor, and installed Windows (first), then Ubunutu 10.04. A separate /home partition was created. The hdd in this computer is formatted ext4.
Now I want to move my /home partition from my old 8.04 computer (32 bit, formatted ext3) which also has a separate /home partition.
Both are connected to a lan, but so far I have not been able to connect from one to the other.
I have done lots of googling on this and am astonished at the apparent complexity involved. There seem to be issues involving whether or not the /home partition in the old computer is in use, user permissions, and I don't know what all else.
Assuming that neither the ext3 on the old and ext4 on the new, nor the 32 bit on the old and the 64 bit on the new are not issues, how do I go about moving the /home from the old to the new? If possible, I would like to use a GUI rather than the command line, but if it is necessary to use the command line, please specify where one needs to be located in the file hierarchy in order to give the designated commands. I am not very knowledgeable about using the terminal.
On my old computer I have Ubuntu installed with all my nessecery environment installetion
I want to install Ubuntu on my new computer.How can I store the old environment (from the old computer) and restore it in my new computer ?
Can i move the entire HDD with the installed 64 xubuntu from one computer to another.
Will it be any problems ,i use the os system just to run my game servers.
Extra is lampp and some Databases ...
will it intsall drivers automacicaly .
I just want to know if its possible to do it ,
I want to install Ubuntu on a hard drive and move the hard drive to another computer.The reason I need to change it is becuase the computer i'm installing it on doesn't have internet or a cdromI want to install it on a better pc and then install the hdd on the other pc.Will it cause problems when I try and boot the computer when i replace the hdd as it won't have been installed on there originally ( I don't know if it installs drivers during isntallation)
View 9 Replies View RelatedI have installed ubuntu desktop on my computer using wubi and its running great but I am about to get a new computer and I dont want to reinstall, reconfig and setup everything again.. the steps of moving my wubi install to the new computer
View 2 Replies View Relatedi have a samsung sgh-j700 mobile phone and want to move music and photos from phone to computer and vice versa. im using ubuntu 10.10 ( i think? got free with ubuntu user)
is there any way to get this phone to be able to work on ubuntu?
I've been trying to figure out how to move /home to the other partition that exists on my computer, however it's ntfs and turns out it's impossible to move my /home there. So how do convert that ntfs partition to ext3, I don't mind loosing data that's in that partition. [url] is the partition I'm talking about. So what's the best way to do it ? If you write what commands I should use please include partition names.
View 3 Replies View RelatedI just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
For Ubuntu 10.04 LTS / Gnome 2.30.2.
I have two applets on my Gnome panel -- NetworkManager Applet 0.8, and Klipper (it works better than Glipper) -- that I want to move.
HOWEVER, right-clicking the panel icons does not enable me to move these applets, as follows:
- NetworkManager Applet 0.8 does not include a Move item in its list of options.
- Klipper displays a long list of Klipper options but no Move option.
How I can move these items to new locations on the Gnome panel?
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedI've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies View RelatedI am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies View Relatedi want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies View RelatedI need redirect serial port from ONE computer to ANOTHER computer, and at the another send this port to VirtualBox with WindowsXP.VB needed because i need to use software for windoze I do this:NE computer:socat tcp-l:54321,reuseaddr,fork file:/dev/ttyS0,nonblock,waitlock=/var/run/tty0.lock
ANOTHER computer:
socat pty,link=/tmp/ttyS0,waitslave tcp:ONE:54321
Now (at ANOTHER) i've set serial port in VirtualBox as
[code]...
I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies View Related
