Ubuntu :: Install An Updated Version Of Deluge
Feb 23, 2010
Im trying to install a program off of the internet and i cannot figure it out. i need to install an updated version of deluge, the updated version is not in the ubuntu catalog yet. so here is the process i went through.
1) went to deluges site, clicked download version 1.2.1 on homepage.
2) went to ubuntu category and chose: "The Deluge packages in Ubuntu:"
3) went to the exact hits category and chose the lucid 1.2.1 version of deluge.
4) went to bottom of page and under "download deluge" and clicked the link
5) chose one of the north america choices
6) chose to open with GDebi Package Installer (default)
7) gave me this error in red letters at top : Error: Dependency is not satisfiable: deluge-gtk (= 1.2.0-1)
View 2 Replies
ADVERTISEMENT
Apr 17, 2010
I had downloaded Bluefish editor from the Ubuntu Software center, some time ago... but today I just visited their new site and I found out that their latest stable version is 2.0.0 where as I have the 1.0.7.
how do I remove the existing one and install the latest stable release? I searched in the software center but it wasn't available. what do I do and how do I get the latest release....
this is the instruction given but can't understand it.
[URL]
View 7 Replies
View Related
Aug 10, 2010
I havent used Linux in a long time. I dug up an old copy of Suse (version8.2), and installed it on an old 599MHZ PC. Ive been trying to update the various libraries to be able to get a updated version of Firefox installed. Is there any chance that this can work? I need to know if Im wasting my time and should just put winxp on this PC. Also, I cant get any repositories working. I assume the default ones I have on the Suse installation are bad and the ones for the later versions will not work.
View 9 Replies
View Related
Jul 4, 2010
I was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies
View Related
Dec 3, 2010
How can I get an updated version of PHP on Ubunut8.04LTS? I think the version that is on it by default is php5.2.1 - I need to use 5.2.10 at least for a web based application I use. Is there a way to tell Ubuntu to use this version - I don't what to go to 10.04LTS as that has php5.3 I think. If I manually install php 5.2.10 it might get messy and will Ubuntu damage it when I run an apt-get update?
View 1 Replies
View Related
Dec 30, 2010
I recently updated my ubuntu to the newest version 10. I have a DSL router with a password. When I try to connect to the net it will try to connect for about 5 or so min then say that I am disconnected. I cannot remember what option I had before to connect but its not on this version.
View 4 Replies
View Related
Mar 18, 2010
The DST in Chile has changed due to the earthquake. I am using openSuSE 11.2, but my clock is using the pre-earthquake info. I am currently using timezone and timezone-java version 2009u-0.1.1, and I believe there is an updated timezone version 2010u, but it hasn't been uploaded to the official repositories yet. How can I fix my timezone?
View 1 Replies
View Related
Nov 9, 2010
How do I install deluge? This is the first thing ive tried to do... So far ive typed in my password 10-15 times, typed in commands in the terminal.... and still NADA.
View 6 Replies
View Related
Jan 27, 2011
What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia? Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
View 1 Replies
View Related
Aug 1, 2010
I am using CentOS 5.4. I updated my firefox to 3.6.7.
After that when I login in facebook and click anything in facebook, my pc log out, even from root user.
cause & solution of this problem.
View 2 Replies
View Related
May 31, 2010
How to build .deb package from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files?
and
How to install Deluge-1.3.0_rc from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files.
How to edit source.listfile with Deluge auto-update?
OS: Ubuntu 10.04 Lucid Linux
Desktop PC, Intel Core2 Due.
View 3 Replies
View Related
Aug 19, 2009
I installed deluge recently on a centos server, but I cant get deluged (daemon) started which I believe is very necessary to start deluge on a server.how to install deluge on a server?
View 3 Replies
View Related
Sep 8, 2010
how do i install the latest deluge release from the repository? Do Deluge have their own repository of the latest release? openSUSE repository does not have the latest release. I am in search of a bitorrent client. i have uninstalled Ktorrent, i dont want that. in windows i was used to Utorrent.
View 3 Replies
View Related
Feb 24, 2010
When a new version of open box comes out. If compile a newer version of open box will it install over the current version or will it install a separate version?
View 2 Replies
View Related
Oct 18, 2010
Is it possible to just roll back the version of Mesa on my install to an earlier version...I think this is the key to getting my game to work.
View 2 Replies
View Related
Dec 13, 2009
How do I replace a 32bit version of 11.1 with a 64bit version of 11.2 or is it even possible?
View 2 Replies
View Related
Oct 10, 2010
my laptop currently has 8GB of RAM and I wouldn't want that going to waste. I have read about the issues with flash on the 64 bit versions of buntu. Would you recommend going 64-bit or 32-bit with PAE? also, does the 10.10 kernel have PAE enabled by default?
View 9 Replies
View Related
Apr 30, 2011
I download many themes .zip tar.gz etc but i am unable to install theme updated from 10.10 to 11.04 lots of problems gnome3 installed but doesn't look like. using gnome-shell login there is a software for theme gnome tweak tool and i also install ch-theme but how i am suppose to add my downloaded themes in these softwares to run them i also try to paste these extracted files in /usr/share/theme folder but don't have permission to write in.
View 4 Replies
View Related
Jan 22, 2011
Specifically, I want Clementine player 0.6, but the guy that installed Ubuntu on my laptop put natty narwhal alpha 1 on it (don't ask me why. I wanted maverick since its stable but he never really asked. The whole thing was kinda a surprise), and Clementine only offers downloads for Ubuntu distros up to maverick. So. Can I/is there a way I can install it anyway? Or am I forced to just use Banshee until the official Update comes out and Clementine is updated in....
View 6 Replies
View Related
Jul 12, 2010
Will 11.2 be updateable through yast to 11.3?
I have to get this workstation out onto shop floor, back into service, wondering if I put 11.2 in now then update to 11.3 while in service. It has 10.3 in it now.
View 5 Replies
View Related
Jul 17, 2010
I have done a update from openSuse11.2 to 11.3 .,(not new install,I did update install). Now at my PC home / partition after NEW INSTALL of SuSE 11.3 file system shwos 10.6 GB(space taken,busy),it's ok.But on my laptop where I did UPDATE INSTALL / file system has 25 GB(space taken,busy).
My question is how can I release 10 Gb form my laptop(we all fight for free space). The difference it's clear>making update takes more space comparing with new install. I am thinking that the system from my laptop kept old filesytems as backup or whatever.
The situation it's similar with the case when I did a kernel compile (taking more space),but in that case I knew how to do,of course I erased the old configuration files,old kernel,old boot files/vmlinuz etc) after checking the new one kernel and boot from it ,ok status. But in the update case I don't know what should I do,because it's the first time after manny years when I did a update ,not a new install(from scratch) and Suse 11.3 it 's after few days of releasing,and of course it can have some tricks.I assume that you did more updates install for OS than me .So I kindly ask you to advice me.Where shall I look and what shall I delete without affect the stability ,operatibilty ,boot of OS and security for my system existed on my laptop.Please,think 25 GB comparing with 10.6 GB. It's something,isn't it? I would like to have back my 10-12 GB in my hard disk as free space.
View 6 Replies
View Related
Mar 21, 2010
I use Factory repositories of KDE4 and there are new releases almost every day in that repository. Although I believe that there are useful updates in the packages, I don't think they are really that crucial that I should update them every day.
When I do update, I usually use graphical frontend and select from menu: Packages >> All Packages >> Update if newer version available. That includes all the updates available either for the program or the package.
I'd really like to be able to sort out these packages that have updates for the programs available. Is there any way to do it?
View 9 Replies
View Related
Apr 30, 2011
Just updated to kernel 2.6.37.6-0.5 from:[url]
No error. then rebooted and grub gives following error:
Press Any Key to Continue
this goes to grub boot menu where I then select my old kernel 2.6.37.1-1.2-desktop and it boots OK.
Question: Should root(hd2,2) be (hd0,2) like the working kernel?
My menu.lst is:
sda and sdb are not used at this time, sdb will have 12.1 Ms soon. The two windows drives are used by virtualvox for WIN XP backup. Not used often.
View 7 Replies
View Related
Jun 25, 2011
Doing an install of Suse 11.4 --- and the screen runs off the monitor to the right. A little guess word with the tab key and I could move through the install process by tabbing three times after the ""help" button. As I'm writing this the machine rebooted after initial load and the screen is okay - and I can see the abort-back-next buttons now. But really, what's with that? That's just so unprofessional. Hopefully the dev team reads these forums since there isn't any easily discoverable way to communicate with them. And you don't keep the iso's updated? The BETA of Firefox 4?? Really? Then I can only update to 4.01 from the repository? so I download an unpack the 5.0 from Mozilla -- and find out ./configure no longer works. The archive extractor still doesn't have an "install package" option anywhere, and now I can't use the command line either?
View 8 Replies
View Related
Jun 3, 2010
I had a normal OpenSuse 11.1 setup, along with Windows XP, swap partition and /home partition. After my hd began failing (badblocks), I cloned the system to a different location (using ddrescue), updated the hd with a new one (bigger), made new partitions on the new hd (preserving the old locations, ex: /dev/sda1 ext3 on old hd still is /dev/sda1 on new one, but made changes to the partitions sizes to make them bigger), recovered all the clones to the new hd, fsck'ed them, recovered grub with install dvd then tried to boot.
On the first boot, it failed to mount / (/dev/sda1) and gave me a command line. I checked /etc/fstab and saw that, on the old setup, it was mounting the partitions based on the HD-id, which obviously changed. I fixed that to use /dev/sda1, /dev/sda2, etc. Now, the systems boots fine. But, when I get to the graphical login part, the keyboard and the mouse don't work. It's a Dell Inspiron 1525 notebook, now with a 320gb samsung hd.
View 6 Replies
View Related
Apr 11, 2011
I just used the on-line update to upgrade from 11.3 to 11.4. Now when I click the computer button in lower left, there are no entries under system, ie. control center, yast, install, lock, logout, shutdown. How do I get those back?
View 9 Replies
View Related
Apr 23, 2010
I do not seem to be able to install an updated Adobe flash.SUSE 11.0 Linux linux-3eb6 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686 i686 i386 GNU/Linux I have done an rpm --rebuilddb. The following seems incompatible.
# rpm --erase flash-plugin-10.0.45.2-release.i386.rpm
error: package flash-plugin-10.0.45.2-release.i386.rpm is not installed
# rpm --install flash-plugin-10.0.45.2-release.i386.rpm
package flash-plugin-10.0.45.2-release is already installed
View 2 Replies
View Related
Jan 19, 2011
If this is correct, how do you know if there updates available?
Do you need to down load and install the individual updated packages?
Sorry for this but I think that I am confused, or worse, not.
View 14 Replies
View Related
Mar 16, 2010
I have a nVidia GeForce4 MX 4000 graphics card. How do I install the updated nVidia drivers so I can use the desktop effects in KDE?
View 5 Replies
View Related
Feb 5, 2010
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
View 9 Replies
View Related
