Fedora Installation :: Windows XP Serivce Pack 3 Supports 1440x900 Resoultion New LCD Display?
Jan 25, 2009
I have 6 year old computer with Geforce 2 Integrated GPU . Windows XP serivce pack 3 supports 1440x900 resoultion with no issues of my new LCD display. But hearing lot of linux improvements,I thought Ubuntu/Fedora/Suse over past few years must have become equivalent to XP. Friends of mine use Fedora in office. So got Live CD and installed . Installed fine but my monitor resolution only displayed 800x600. (highest possible). Thought that since Linux runs on mobile it can very well run on my Old Computer.
View 4 Replies
ADVERTISEMENT
Aug 12, 2010
I am running fedora Fedora 2.6.31.5-127.fc12.i686 - works fine, but it puts my display adapter in old fashoned simple vga mode.
DISTRIBTION
Fedora 2.6.31.5-127.fc12.i686
Mysql 5.1.47
Apache 2.2.15
CONFIGURATION
1.25 ghz AMD athlon
NVIDIA RIVA TNT display adapter
ECS K7S5a board / chipset
AMD BIOS 07.00T
512 mb main mem
128 kb primary cache
256 2ndary cache
66 mhz bus clock
I use the bios to dual boot between two disks, (1) this op sys and (2)win98se - where I have a driver that fully supports the nvidia.
The disadvantage to my current situation is that there are some programs - eg Evolution - that assume I can see more than you see with this setup - eg the buttons at the bottom of the screen do not appear and i have to do a trial and error tabbing to get what i want. I just downloaded openoffice and i see that it wants 1000x2000 or so. Thus I wont even try to install it unless i can resolve the adapter thing.
I'm very happy with this fedora - use it for software development. But as I become more fond of it, I would like to use it instead of windows - which I can't unless i can see the whole screen
At one point - in response to a suggestion that I download security updates - I did so and got 2.6.32.12-115.fc12.i686. It was incompatible with my config - put up a screen that looked like a tv test pattern and went into a loop. So I went back to 2.6.31.5-127.fc12.i686.
View 8 Replies
View Related
Oct 25, 2010
The file name (with extension) is given below Win2-7Pack_v6.0_Multilang_Aero_MD5_ca34601ee39e933d4131 d46cd012041a.tar.lzma and this file, on double click gives an error, I've attached screen-shot of it.
View 1 Replies
View Related
Dec 20, 2010
I installed Ubuntu 10.10 along side windows 7, It works flawlessly accept for one issue: no widescreen resolution (1440x900).I have some CIBOX screen and XFX HD 6850.
View 3 Replies
View Related
Jun 29, 2010
I have little problem with gpk servce pack (from gpk-package-extra package). When im trying to make list of my packages in system i have:
Quote:
Can't write the file, no permissions. OK, but when i run gpk service package as root, program freeze, i click create packages list option but application never create this file, status is always on 0%, even after 1 hour. I saw video tutorial, where base are created by normal user i /home - why i can't Console says nothing about this.
View 2 Replies
View Related
Jul 16, 2011
I have installed Ubuntu 11.04 on my Dell Latitude D610 (with ATI X300 graphics card) and am trying to set the default resolution to 1440x900 for my Samsung Syncmaster 931 monitor. I have installed "fglrx" and when I run "xrandr -q" I get the following information.
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1440 x 1440
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 410mm x 257mm
1440x900 59.9 + 75.0
1280x1024 75.0 60.0
[Code]....
Other posts say I need to edit "etc/x11/xorg.conf" but this file does not appear to exist.
View 8 Replies
View Related
Apr 25, 2011
it will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies
View Related
Apr 10, 2010
so i had to run recovery mode and all my original settings were lost.. boohoo ill get over it. soon enough itll be back to normal. BUT the main reason i had gotten so screwed up before is because i was trying to change my screen resolution. Now from having my computer for a month or so ive realized there are many diff verisons of Ubuntu and many ways of doing things. All im trying to do is change my screen from 640x480 to a more viewable size, cant think of the dimensions right now. Im running NVIDIA graphics and when i try to run display preferences from settings it obviously won't open cause it isnt configured.
View 1 Replies
View Related
Apr 23, 2010
I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies
View Related
Feb 7, 2011
I am looking for a locally hosted web based mail client that will work on Windows (Vista and up) as well as Linux. Right now, I use mutt (Cygwin mutt on Windows), but I was wondering if there was a simple web based client I could use. It does not need all of the fancy features of mutt, just the ability to send mail and allow me to browse my local mbox files.
View 2 Replies
View Related
Jul 17, 2011
I am trying to install the game NetHack. I am having trouble installing the Vulture's eye graphic pack. How to do that? Any working link to a downloader.
View 2 Replies
View Related
Nov 30, 2009
There are lots of updates in it. This is just a newly install fedora 12. I don't know which is necessary to update in SE.
View 5 Replies
View Related
Jun 24, 2011
I can't find how to fill a bug or ask a question on launchpad (there are only answers!), so I do it here.
I have the language-pack-gnome-fr installed in Lucid x64. Since yesterday there's an update, but it won't install code...
View 2 Replies
View Related
Sep 4, 2009
I have a VM with Windows XP that is driving me crazy. Everything works great except the display windows (and networking, but that is a different story) I am open VirtManager and go to display the OS and the images will get distorted. I will open IE and scroll down a webpage and some of the text will remain still and others will move, leave an image of garbage. This makes it very aggravating to use. To clear the page I can shake the window (using the cursor not my hands) or move from one tab to another till it clears.. then if I scroll again I have to deal with it all over again.
View 1 Replies
View Related
Nov 30, 2010
Does the RHL 8.0 version supports the Installation of Oracle 10g
View 3 Replies
View Related
Jun 10, 2011
Does Fedora supports Touchscreen computers? I am planning buy a new desktop computer and there are several models that come with touchscreen, I don't really care about this feature , I just want to know if Fedora can operates under a touchscreen system. If Fedora doesn't support touchscreen systems, Is there any plan to integrate this option in a near future?
View 1 Replies
View Related
Mar 31, 2010
Does anyone have a kernel that supports Atheros network cards? I am using ASUS EEE PC netbooks and none of the kernels I have access to have drivers installed for the NICs. I am having issues when I try to build my own kernel and maybe someone has a precompiled one? Either that or if someone has a basic, step-by-step guide to building your own custom kernel. This is my first time building a kernel and I am kind of lost. This isn't actually for running Ubuntu I will be using it in an imaging program called FOG. I just need a kernel that will support these NICs so I am able to do some imaging.
View 5 Replies
View Related
Mar 5, 2010
a twitter client which supports proxy function for Fedora?
View 4 Replies
View Related
Dec 8, 2010
I want to buy a gprs modem which supports linux, which brand is better?
View 5 Replies
View Related
Aug 3, 2011
Get some recommendations for a Linux Wireless card for a laptop that supports 5 ghz?
View 2 Replies
View Related
May 30, 2010
I run RHEL5 on Dell GX280 with "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)" and i810 driver. But I cannot obtain 1440x900 resolution. Here's my xorg.conf:
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 9 Replies
View Related
Jun 26, 2010
so I've finally told myself i'd be better off with ubuntu instead of windows. And now I'm seeing I've made the wrong decision. I've spent 4 hours searching the web about how to get the 1440x900, tried some of the solutions and nothing worked. The resolution doesnt show up in the nvidia control panel. I tried somehow editing xorg.conf which just messed everything up so i had to put it in the default state..
View 2 Replies
View Related
Apr 15, 2011
I just posted this issue in the server section. I see now that it probably should go here but didn't see a "move" option.
Unless this issue is immediately familiar to someone, my question really is how can I troubleshoot a failed installation attempt?
I built a simple file server. It was running 10.04 with Samba fine for about 6 months. It was a RAID 1 system using LVM and no encryption.
I recently discovered that one of the drives was already failing with a bunch of bad sectors. So, I decided to replace the drives and re-install everything. However, for some reason, it's not finishing the install. It gets to 94% and "Configuring language-pack-en-base" and just hangs. No drive light activity. I've waited hours and it never progresses.
Some details of the server:
Two WD 1.5 TB drives.
RAID 1
Adding encryption this time.
LVM
Partitions: boot, root, swap
I have tried several variations. Putting the boot partition in or out of the LVM. Went back to 10.04. Even tried to re-install on the same old hard drives that I'm replacing. All of these variations result in the exact same issue.
The two differences that I can think of are adding encryption and that the motherboard firmware has been updated since the last install.
View 2 Replies
View Related
Feb 12, 2011
I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800.
Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work.
Testing it from the GRUB2 command line:
set gxfmode=1440x900
terminal_output gfxterm
# -> garbled nonsense
# back to trusty 640x480
terminal_output console
[Code]....
View 1 Replies
View Related
Feb 8, 2010
I've been loitering over my resolution and nvidia xserver settings for about 2 days now, fiddling with xorg.conf and breaking ubuntu in the process trying to get my resolution at it's native settings. I've searched through many forums and none of them have solved my problem. Its maximum resolution is 1360x768, which isn't enough. It should be 1440x900. I have tried adding custom modes to the xorg.conf file and it wouldn't work. I don't know what's going on. Also here is my xorg.conf since I saved the nvidia settings to it...
[Code].....
View 9 Replies
View Related
Nov 10, 2009
Upgraded to Fedora 11 and my display aspect ratio is now broken. I have a 23" Acer screen, but in Gnome its auto detecting as a 20" Acer display and the aspect ratio is wrong and the display grainy. I read the FAQs and am trying out some suggestions. Created an xorg.conf file in the correct place, contains the correct monitor settings but my display is still broken. Q. How do I force the kernel to read the xorg.conf file ?(PS: I'm kind of a newbie, have only come back to linux after a few years of using Windows)
View 5 Replies
View Related
Jan 18, 2010
i did not search in depth for this, as google spit a whole of different aswers at me, making not much sense at all. So here we go: Is it possible to install Fedora on a PC which has no keyboard nor mouse nor display attached to it? And if so plx give a link or a short description how to do it. I read about kickstart, but this was all a little wacky.
Note: The PC will have network access.
View 1 Replies
View Related
Feb 12, 2009
I'm new to Fedora and just installed F10 yesterday. Everything was perfect, no snags at all, until I used the software tool to install the ATI drivers. Now my computer boots but instead of going back to the GUI all I get is a gray screen. I've tried everything I know to get to the command line so I can go back to my old X11 settings but there's no response -just the gray screen.
I'd prefer not to have to reinstall if I could avoid it. Is there a know bug with either a Toshiba Satellite A210 series laptop or the ATI Radeon Mobility X1300 graphics card? Since I'm not able to get to the command line, I don't know of a way to diagnose what's failing.
View 3 Replies
View Related
Mar 13, 2010
I just upgraded to an ASUS MS227 on a Ubuntu 9.10 box with a "NV34 [GeForce FX 5200] (rev a1)" video card. Here's the problem, the only two resolutions it will work in is either 1900x1200 OR 1440x900. Anything in between shoves the display about 5 inches to the left, so far over that it's not correctable by the monitors own horizontal control.
This is my xorg.conf:
Code:
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 16
[Code]...
View 2 Replies
View Related
Apr 29, 2010
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
View 9 Replies
View Related
