I upgraded from 8.04 to 10.04 without issue. Today I was trying to set up the development version of GRASS7, which required changes to Python 2.6. instead of reinstalling,I managed to select remove for all python except minimal for all versions. Ubuntu of course now boots in low graphics mode. Is there a way I can restore it to the default without reinstalling from scratch?
View 2 Replieshow can i devevelopment of licux a new version of school
View 1 Replies View RelatedI want to do some modules development in fedora 11, by the command uname -r, I get the current kernel running in my system.
Code:
$ uname -r
2.6.30.10-105.2.23.fc11.i686.PAE
But when I run the following command
Code:
# yum install kernel-devel
the package what I installed is kernel-devel-2.6.30.10-105.2.23.fc11.i586 and kernel
development directory is /usr/src/kernels/2.6.30.10-105.2.23.fc11.i586
So,the modules I developed can't insert to current running kernel because current is i686 and the compile environment is i586. Is that a bug of fedora 11?
I have been looking around the web and forums for a while for the best way to set up a development office. I havent really found many specifics. I am with a new company is just starting to really take their development services seriously. We've added a couple developers and designers in the last month. I am trying to figure out a the best way to set up our environment.
We have a couple dedicated virtual servers with Media Temple. Currently, we develop everything under a subdomain of a domain we set up for development. When the site is ready to go live we move the site to its own domain. I cant believe this is the best way to go about things. So, what do you guys suggest as a setup? Software, versioning, etc. We have the ability to setup a test server in house and then push out changes to the production server but not really sure if that is needed.
We do mainly Wordpress development. If this should be posted in another area,
On Windows and Mac it's as simple as downloading some WAMP and XAMP stack and clicking "install".
On OpenSUSE I'm trying to do it myself. I went into YaST and installed the "Web and LAMP Server" pattern.
Then I edited the default-server.conf file to point towards my website by changing the DocumentRoot and <Directory "blah blah"> lines.
Then I tried to start apache, but got the following error:
Code:
# apache2ctl restart
httpd2: Syntax error on line 188 of /etc/apache2/httpd.conf: Could not open configuration file /etc/apache2/sysconfig.d/include.conf: No such file or directory
So I just went into httpd.conf and commented out that line.
[Code].....
I was trying to setup a cross-platform development environment with qt, an thus looked for the qt-sdk package I used to install on my 32-bit machine.This package appears to have been deleted from 64-bit ubuntu maverick, but I do not understand the details...
- Has this package been renamed, or is there another one in place of it?
- Is this package going to be available again in the future?
PS: I am aware that one can install the sdk by downloading the installer, but for unattended install I prefer the apt package...
I'm still fairly new to Linux so please forgive me if my description of my problem leaves out important information. My problem is centered around using a AT91SAM9G45 development board (DB)on Fedora 10. I have directions on how to setup on my host machine a DHCP server to connect to the development board. I have installed an additional network card (eth1) that will be used exclusively to communicate with my DB.
The DB has been setup with an ethaddr=12:34:56:78:9a:bc and an ipaddr=192.168.251.191.
The following is info from ifconfig for eth1:
eth1 Link encap:Ethernet HWaddr 00:0A:5E:1A:46:1C
inet addr:192.168.251.190 Bcast:192.168.251.255 Mask:255.255.255.0
inet6 addr: fe80::20a:5eff:fe1a:461c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38 errors:0 dropped:0 overruns:0 frame:0
[Code]...
I have dedicated LAMP server running and I was wondering if I am able to run a dev/testing zone on it so to speak?...That way, I can have my come back soon, site is being constructed page live, and develop elsewhere on the server. I was trying a virtualhost, but since that is name based, the web browsers don't know what to do with it. I know the safest way is to develop on this machine then move to web server but I'm just seeing if what I was trying to do is possible.
View 4 Replies View Relatedhow to setup a local mail server for internal testing on my php development work. For example if I sent an email using php script to [url]....I should be able to check the mailbox of 'someone' either in Outlook or SquirrelMail.I have done some reading about this. All I know is that I need Postfix with Courier. But I just don't know to get it working.
View 3 Replies View RelatedII'm a front-end web developer, I've always developed on Windows with technologies like XHTML, CSS, Javascript and Flash, I've dabbled with PHP and MySQL. I am well used to Windows workflows and tools, from Photoshop to Notepad++, Filezilla and WAMP server stacks to After Effects, and a swathe more - but always on Windows.I'm at a point where I think I need to start seriously developing on a Linux box, specifically at the moment to create web apps based on Node.js, but compiling tools and programs has become a task I'm more frequently required to do.
My question? I need to get my hands on a user-friendly install of Linux, but which one? I need common interface developer tools (lists welcome) to replace... well as many tools I have on Windows as possible.I need to be readily connected to the internet, I need OS updates to not destroy my workflow by crashing the OS, as I've seen Ubuntu do to various friends. I want efficiency, I need to be able to customise what I need to in order to perform development tasks.I guess this could be a long list, but - I don't have practical working knowledge of the Linux OS, nor how it "compares" to Windows (excuse my faux pas). I'm obviously willing to learn, but I'm far, far more keen to just... continue interface development, just on Linux instead of Windows.
I am currently creating a fedora 13 based repository for a Class Project at my school and am having some troubles. The repository is set up for 2 different version of fedora, 7 and 13, with 7 being the first to be used.
As of right now I am stuck with a [errno -3] error code. I have installed downloaded all the .rpm's needed and placed them in /var/www/html/fedora/7/os/i386, then used createrepo to make the repodata folder, repomd.xml and the .gz's needed, edited the yum.conf and the yum.repos.d/ *.conf files, and now here I am.
I have tried following guides on forums and google to which i have had the sound working once, but when i restarted my server it went off again :? what i need is some step by step instructions I have pulseaudio installed and in the option sound preferences the output says dummy output, but when it was working it had my on-board sound card there I am new to linux and dont know where to start.
View 5 Replies View RelatedMy Samba setup works just fine however whenever I do stop/start/restart. I get these errors in the logs:
Jan 17 00:21:14 neutrino smbd[4297]: smbd_open_once_socket: open_socket_in: Address already in use
Jan 17 00:31:20 neutrino smbd[4557]: [2010/01/17 00:31:20, 0] smbd/service.c:1009(make_connection_snum)
Does anyone know what to think of these? My thought is since it works just ignore and probably the SuSE team will get to cleaning this up sometime.
I installed the base of Debian (only CD 1) without the desktop environment, so it is console only; also I am dual booting with Windows 7 x64 on this Dell Inspiron 1545 laptop... I have also successfully mounted my usb flash drive and CD drive; the one thing I am finding rather hectic is finding a way to connect to my wireless network with a "WPA2 Personal" Security and "TKIP/AES" Encryption with a Dell Wireless 1397 WLAN Mini-Card... I doubt that the drivers are actually installed, and Idk how to install them.Google searches on this yield confusing results, so I need help. So far, the most useful help I have found is the link posted here: http://en.community.dell.com/support-fo ... 29916.aspx but I have no idea on how to install that, if it is even what I need.
View 5 Replies View RelatedDid a new install of F14 on a T61 Thinkpad w/ Motorola DSL router (ATT supplied). The install was smooth and had no indications of problems.
When I went to use the browser, it showed a functional Fedora website. But if I try to go to goggle or any other web address, the browser complains that it can't resolve the web address.?
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedHow do I go about setting up a lamp server just for testing out and learning web development without opening it up to public?
View 1 Replies View RelatedI'm looking for a program that allows me to create website. For the past years, Frontpage and Dreamweaver really worked for me, but none of these are working on Ubuntu. Is there an alternative for Ubuntu?
View 6 Replies View Relatedi need to install a web development ide in my ubuntu 11.04.
which one do you recommend?
it should atleast support html, css, php and javascript.
I'm a bit of a noob with ubuntu, but have been using the dreaded windows for many years, programming. My tool of choice is Delphi, which no longer exists for linux.
There is this freeware (of course) application called lazaraus which I can install, but whenever i try even run the simple program i get
/usr/lib/lazarus/0.9.28.2/lcl/masks.pas(28,22) Fatal: Can't find unit contnrs used by Masks
what happened to setup.exe? and all needs doing to install, just click next, next, next ,next, wait a bit and there is delphi sitting in the start menu, and it works
It seems to me that if I could download every single development library or dependency available for Linux/Ubuntu, that it would make my life a whole lot easier as for as acquiring software. All I would have to do then is run configure/make/make install which isn't that bad.
The problem being here that the repositories in Ubuntu suck. In fact, they suck in all Linux distributions. The only things they are good for is gathering dependencies needed to compile programs. All the packages that I actually want are frozen and therefore are outdated and useless. I've had to learn how to compile stuff just so I could get the programs working like they do in Windows. Except in Windows all I had to do was double click on the file and not spend hours figuring out what to do.
Then of course there is the other problem that about 90% of the software I need is not included in these repositories.
Have Linux people not heard of the Internet? The ultimate repository? It sure works well in Windows.
Anyway, if there is a way to download all these files in one go (because let's face it, I'll have them all downloaded eventually) I would like to know how. Even if they take up 100's of gigs it would be worth it for the savings in time and energy.
I tried to build the latest lua package from source but the development libraries are missing. Where are they?
[url]
Quote:
Quote:
After downloading the files for your system you'll probably have two files named lua-5.1_XXXXX.tar.gz - contains the library and includes for developers lua-5.1_XXXXX_bin.tar.gz - contains the executables for end user
But the archive at [url] doesnt contain such files.
I have recently got tired of Windows and now trying to switch to Linux Kubuntu. how to download TCC for Linux, but I'm not able to use it. I used to add two right click menu entries(at WinXP) - Compile, and Compile and Run. Is there a way I can do it with Linux, for the .C format?
View 2 Replies View RelatedWhat is your opinion on *very* early development builds of Ubuntu? I decided to post this poll because I have *already* upgraded to the Ubuntu 11.04 "Natty Narwhal" Pre-Alpha.
Please explain your votes in detail. Edit: Sorry for not posting the poll; accidentally posted too fast.
I'm trying to do a coursework at home which is a java web app. I've installed Tomcat and mySQL, both appear to be working fine. I have Netbeans installed already - from the Ubuntu Software Centre ages ago - when creating a new project it doesn't give an option for a web app project.... Is there some extra package(s) I have to install ?
View 1 Replies View RelatedI have installed Ubuntu 10.04 on my desktop. Installing eclipse for java development. before installing I want to install java and tomcat server so please guide me installing all the below software in series.
1) JAVA
2) Tomcat Server
3) Eclipse IDE
I'm looking to convert my HTPC into a remote android dev server for my girlfriend and myself, however I want to make sure that it is possible to do what I am looking to do.Is it possible to map local devices to the VNC server (such as an android phone) so that we can work on development over VNC with phones we have on our client computers? I know its a trivial matter to map local drives over VNC, but what about non-HD devices, can I still maintain full functionality as if the device itself was plugged directly into the server?'ll be installing ubuntu again this weekend, never got around to it after my last HD failure.
View 1 Replies View RelatedI am having to use two separate workstations for building 32 bit and 64 bit RPMs: 32 bit RPMs on a workstation running 32 bit RHEL and 64 bit RPMs on a workstation running 64 bit RHEL.Is it possible to build both 32 bit and 64 bit RPMs on the workstation running 64 bit RHEL? If so, how?
View 1 Replies View RelatedHow do i check for updates to the current version of rkhunter and if possible upgrade to a new version?
View 2 Replies View RelatedIs there a way to limit the speed that apache will send a page to a specific computer in my LAN? I would like to be able to test what my pages would be like if they loaded at 25KB/s for example. My Server is 192.168.0.2 and the other 'browser' computer is 192.168.0.4.
View 3 Replies View Related