Debian Configuration :: Console Only Version Wifi Setup?
Jan 23, 2011
I installed the base of Debian (only CD 1) without the desktop environment, so it is console only; also I am dual booting with Windows 7 x64 on this Dell Inspiron 1545 laptop... I have also successfully mounted my usb flash drive and CD drive; the one thing I am finding rather hectic is finding a way to connect to my wireless network with a "WPA2 Personal" Security and "TKIP/AES" Encryption with a Dell Wireless 1397 WLAN Mini-Card... I doubt that the drivers are actually installed, and Idk how to install them.Google searches on this yield confusing results, so I need help. So far, the most useful help I have found is the link posted here: http://en.community.dell.com/support-fo ... 29916.aspx but I have no idea on how to install that, if it is even what I need.
View 5 Replies
ADVERTISEMENT
Dec 6, 2009
CENI is powered by sidux. Unfortuntaly it isnt working all the time. Is there something like CENI for console setup wireless?
View 2 Replies
View Related
Feb 14, 2010
My wireless works without issue with network manager. However I notice that it seems to be a gui only app. That is, when I stop the display manager my laptop loses internet connectivity. The NetworkManager service is still running. Is there a commandline method of using the NetworkManager settings to start the wireless connetion?
View 14 Replies
View Related
Feb 22, 2016
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
View 0 Replies
View Related
Feb 13, 2011
I know that in an xterminal I can redefine the default colour with something like
!!red
URxvt.color1: rgb:cc/00/00
URxvt.color9: rgb:ef/29/29
Is it possible to do something similar in the Linux (framebuffer) console?
View 4 Replies
View Related
May 6, 2011
The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies
View Related
Aug 24, 2011
I would like to put an image in the background of my console (tty) like done by Gentoo or Suse : I found several tracks to follow, but I would like to have your advice on the best way to do that for Debian.
View 3 Replies
View Related
Nov 13, 2010
I'm trying Debian again just for fun after using Slackware for years. When I "su -" on Konsole in Debian I get this for my prompt:
Code:
darksaurian@darkswamp:~$ su -
Password:
darkswamp:~#
darkswamp is my hostname that I made up when I installed. On Slackware I'm used to it saying:
root@darkswamp
or something like that.
I'm starting Konsole the same way on both:
konsole -e $SHELL -l
I kind of wish it still said "root" just because I'm used to it.
View 5 Replies
View Related
Apr 9, 2010
I know there are many threads regarding this topic.I probably read most of them. At installation time I told Debian to use German keyboard layout (since I am from Germany). Now I want to switch it to American keyboard layout. In X this was no problem. But in the tty consoles I cant get it changed. It does not matter to me if it is system wide or user wide because I am the only user. (system wide would be a little bit more preferrable because it would affect the super user too, I think).I tried dpkg-reconfigure console-data
and selecting my desired layout. This changes the Layout to American until reboot
View 2 Replies
View Related
Nov 2, 2010
I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.
I thought that this was due to xrandr, however when I issue:
# xrandr -s 1024x768
only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).
I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.
PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.
View 5 Replies
View Related
Sep 4, 2011
Reinstalled Debian Squeeze (64bit/gnome) on my Notebook using Netinstall. Everything worked like always but in the setup instead of typing in a root password as asked to i just pressed enter (in the hope of not having to type in a pw in the console later, just having to press enter then)
When i needed rootpw to install some software (using SoftwareDownloader) the normal loginpw seemed to work, but not in the console.
ari@HP625:~$ su -
Password:
su: Authentication failure
[Code]....
View 3 Replies
View Related
Sep 8, 2011
I just installed Debian 6 and need to change the console keyboard layout (I am not running any sort of gui).I installed 'console-data' and ran:# dpkg-reconfigure console-dataThis assigns my Apple keyboard keys perfectly but it won't survive a reboot, which is really important for entering passwords
View 2 Replies
View Related
Oct 25, 2015
Since moving my debian server over to a Gigabyte H97N-WIFI motherboard the console dims on booting and generally stays dark. Strangely the screen the brightens up if I go to an emergency shell, but if the boot runs successfully I don't see the resulting login prompts. Also, during the boot process the messages to the console are too dark to see.
I've tried the i915.invert_brightness=1 fix mentioned here [URL].... but that seems to have no effect. I'm assuming that this has something to do with moving to intel graphics as my previous hardware had a radeon graphics card and didn't display this problem.
View 4 Replies
View Related
Apr 13, 2010
I'm always getting a blank console screen after booting a 2.6.32-trunk-amd64 kernel in squeeze. I still can read the line "Loading, please wait ..." in the display for a second - then it's completely black until X windows is starting. When I try switching from the X console to another virtual console (by pressing Ctrl-Alt-F1 e. g.), the complete system freezes. I have to hard reboot then.When I boot the previous 2.6.32-3-amd64 kernel instead, everything is fine as expected, though.There's a line "GRUB_GFXMODE=1024x768x16@60" in /etc/default/grub as well as a line "set gfxpayload=keep" in /etc/grub.d/00_header. So the problem might be framebuffer related in any way. Any ideas what could be tried?The system is a Latitude E6500 with a Mobile 4 Series Chipset Integrated Graphics Controller
View 2 Replies
View Related
Jan 13, 2011
This only started after the recent updates which included a lot of sysv stuff in Squeeze. I'm not talking the Gnome or Xwindows consoles, I'm talking the full-on type you get when you do the CTL-ALT-F2 type of console. before those updates, I had no trouble. Now I can't get back into the gui by pressing CTL-ALT-F7 as usual. All i get is just a black screen. I do have the nvidia proprietary driver installed using DKMS, and I am running the latest (I think) liquorix kernel.
View 5 Replies
View Related
Sep 26, 2015
After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
View 0 Replies
View Related
Apr 1, 2010
After an update on squeeze about a week or two ago, my console font turned green. I'm not exactly sure of the timing, because I switch between lenny and squeeze, and some time passed between the update and the reboot in squeeze.
During the update, I was asked if I wanted to keep my altered /etc/grub.d/00_header or take the package maintainer's version. I took the PM's version, knowing I'd lose my edit (set gfxpayload=1024x768x16). When I add that line to the new 00_header, run update-grub and reboot, the console font is the size I want, but it's a dull green. Reminds me of my first computer. How do I get it back to white and keep the 1024x768 resolution?
Currently booting with grub-legacy and chainloading grub2. If I boot entirely with grub-legacy, and pass vga=791, the console font will be white. It doesn't matter which kernel I use. Currently, I'm running 2.6.32-3-686. Same behavior exists if I use 2.6.30-2-686. If I use 1024x768x8 I get a dull gray instead of dull green.
View 4 Replies
View Related
Feb 15, 2011
I have my X11 setup configured to rotate 90s counterclockwise for a portrait monitor. But when the system turns on, it's in the framebuffer console which is set to landscape mode. Is there a way to set it so that even the console is rotated in portrait mode? I'd like to do this automatically.
View 6 Replies
View Related
Mar 30, 2011
I have been using my system for couple of weeks, and normally update software when the icon is displayed on top bar (gnome). Last couple of days there were updates for X, and I am not sure whether that is the cause of my problem. Once bootup, I get the login screen. When enter the password the login screen keep coming back. there is no error about any password issue, or anything. It keeps prompt me to enter the password.
I could login back the following way.
1. ctrl + alt + F1 , and login with the same username/pwd as for X
2.change to root
3.pkill gdm3
4.exit from root to user privilege
5. startx
The system starts X correctly and no login screen is displayed. I could use the system as usual.
The only thing I did custom to my system was upgrading to the latest kernel (2.6.38) using the source. This was to get support for my hardware, but that was about a month ago. I do not see anything in /var/log (X, demesg etc).
View 4 Replies
View Related
May 22, 2011
I installed 2.6.38 from backports. It boots OK, and among the start-up messages it says it has started kdm, but then it offers only a console login prompt, no GUI. I assumed (perhaps optimistically?) that newer kernels would be backward-compatible, and that any dependencies on other software would be enforced by the package mechanisms. Running amd64, Squeeze, KDE.
View 6 Replies
View Related
May 17, 2011
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
View 6 Replies
View Related
Jul 18, 2010
My pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?
View 5 Replies
View Related
Jan 7, 2014
I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
auto lo
iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
View 14 Replies
View Related
Apr 8, 2014
I've been installing multiple versions of ubunutu over years and now I better understand why I faced always problems with wifi configuration on these different baselines : Debian root of course.
Now on Debian 7.4 :
The Broadcom BCM4313 driver is not loaded by default (not free product) for my wifi card. This is stated thru the UNCLAIMED declaration
Code: Select all
sudo lshw -c network
*-network UNCLAIMED
description: Network controller
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ...
Unclaimed means : no driver found (no kernel association)
So I installed the driver located in the non-free backports by adding this target into the repository
Code: Select alldeb http://http.debian.net/debian/ wheezy main contrib non-free
and install :
Code: Select allsudo apt-get update && apt-get install firmware-brcm80211
sudo modprobe brcm80211
Check seems OK :
Code: Select allsudo lshw -c network
*-network
description: Wireless interface
product: BCM4313 802.11b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
[Code] ....
I can't connect with wlan0, it doesn't work. I found information here regarding WPA2/PSK wifi configuration on debian : [URL] ....
so I added this setup to my interfaces file an got :
Code: Select allauto lo
iface lo inet loopback
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid Hznteam-Datacenter
# hexadecimal psk is encoded from a plaintext passphrase
wpa-psk 12345678901234567890123456
It's worth ! no more wifi network are detected and ifconfig gives no ip address allocated :
Code: Select allwlan0 Link encap:Ethernet HWaddr 78:e4:00:4e:49:a3
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code] ....
View 7 Replies
View Related
Jun 28, 2015
In a hp pavilion 15 Notebook PC with Debian 8.1.After two hours or so wifi stops working. Network-manager does not give any indication of failure but some times a yellow question mark.
rfkill list wifi gives:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ifconfig gives:
eth0 Link encap:Ethernet HWaddr 8c:dc:d4:7b:c2:0e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3994 errors:0 dropped:0 overruns:0 frame:0
TX packets:3661 errors:0 dropped:0 overruns:0 carrier:0
[code]...
View 9 Replies
View Related
Sep 5, 2015
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
View 4 Replies
View Related
Apr 17, 2016
I am new to linux and decided to use Debian. I installed it on my laptop and have a few problems.First one is my WIFI.
Laptop type: HP Omen 15
Wifi adapter: Intel Wireless 7260n
rfkill list output:0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
So wifi is not displaying
Kernel: 3.16.0-4-amd64
Debian version: 8.4
gui: LXDE
URL....
But they see in rfkill list the adapter.How to make this adapter work?I did this with no result:
nano /etc/modprobe.d/blacklist.conf
in file add:
#Fixing a bug that prevents wifi from working on HP Omen
blacklist acer_wmi
I would like to learn more about Linux, but before experimenting I need a working system. The plan for me is to run this as my native machine with vms on top of it with other OS.
View 12 Replies
View Related
Jun 16, 2010
I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.
Heres /etc/network/interface :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo
iface lo inet loopback
View 6 Replies
View Related
Aug 23, 2010
I have finally weaned my laptop from network manager by setting up my /etc/network/interfaces file. # The loopback network interface auto lo iface lo inet loopback
# The primary network interface allow-hotplug eth0iface eth0 inet dhcp
# Wireless Setup auto wlan0 iface wlan0 inet dhcp wireless-essid linksysn
wireless automatically connects to my home wireless network (linksysn). But suppose I wanted to take this laptop to the coffee house where they have free wifi. I am assuming that my wireless will not automatically connect to any other wifi hotspot except linksysn. So how do i set it up to roam like NM did?
View 5 Replies
View Related
Aug 30, 2010
To exploit the guessnet capability, I have configured my WIFI so that ifplugd can auto connect WIFI after boot.The access point is hidden, and I have provided all the required info in my /etc/network/interfaces file
mapping wlan0
script guessnet-ifupdown
map default: office-wifi
[code]....
View 1 Replies
View Related
