I am trying to install clfswm. I am able to run it from a tty. I start a new X server with
Code:
startx xdm --:1
Then in the new X server, I run
Code:
clisp -K full full /home/seb/Downloads/clfswm-1102/load.lisp
[Code].....
It just doesn't work. Actually, I get an entry in the session selection thing, but when I try it, the login screen disapears a sec or two, and then comes back. If after that I try to open a session with another window manager/desktop manager I get a black screen (with a few things in it) that looks like clfswm, but I can't do anything in it.
I have only used kde and gnome until now, and installed openbox to try to see how it works) so I don't know what to do right now.
In case it helps, the installation instructions. I didn't try putting the said line in my $HOME/.xsession or wherever it should be because I thought it would replace the kde login (and that is not what I want). I think what I want is a .desktop file in /usr/share/xsessions/, I'm just not sure what to put in it.
i have fedora 13.i want to play with the X window system.so i want to install a new window manager other than kwin,metacity,twm&mwm..please guide me..and give me the source for X window tips and tricks..
I try to install two window manager under openSUSE 11.4 x64. AmiWb and WindowLab. I compiled them and there were no errors, but they don't show up in the login menu. If i start them by switching ALT-F2 i can't connect to the xserver. As far as i can see, it is not in USR/X11 either. Have to check where it ended up in. But in my previous experience in installing a WM i did not have any problems.
as per the title - after a hard disk failure got new disk and attempting dual boot of xp and 10.10 - had to burn 10.10 twice to get it to complete the install process, but thats another story - basically on logging in there is now gnome panels - i get my 'low battery' warning etc and the login music but thats it - it does work in 'safe mode' though - what can i do to correct this?ironically had exactly same problem on the upstairs desktop when upgrading to 10.4 but buggered if i can remember how i fixed it - even checked my previous posts on it.
I am trying to integrate two new machines into an old network running NFS and NIS. One machine has 11.4 and the other 11.3. On the 11.4 machine login, I select "other" and before entering my password I can select my desired window manager from the "sessions" list in the task bar. On the 11.3 machine I select "other", but nothing appears in the task bar. The "sessions" list briefly flashes up after I have already entered by password and hit enter. This machine always starts up in KDE even though I have specified GNOME as the default display manager.Also, on either machine after validating my login, I never appear as a user in the login list. I always have to select "other". Other network users in the same group or users local to the machine do not have either problem. I tried wiping my home directory, but it makes no difference. I'm guessing this has something to do with the NIS but there is no admin here anymore
I recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
I installed debian with minimal packages (without an any X components). Later I installed xserver-xorg-video-intel , xserver-xorg-input-mouse, xserver-xorg-input-kbd ... and other X components through apt-get. Created a Xorg.conf file.
On execution of X, I see black screen without cursor. What are the other minimal packages that I need to install in order to run any window-manager like openbox.. ?
I'm trying to create a media box for my TV. I've installed a barebones ubuntu from minimal install disc. After that I installed xorg and XBMC. But my usb devices are not automounting. Is there a pacakage im missing? I've read that XBMC should be able to handle mounting of devices and that no window manager or desktop environment is needed to handle this.
I followed these two tutorials and my current install is 10.04 Lucid. http://forum.xbmc.org/showthread.php?t=38473 http://wiki.xbmc.org/?title=XBMCbuntu
I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
I have been trying to install a different window manager on Slackware. I have downloaded from here [URL].. And I have followed this guide to install wmii [URL].. Now when I follow the same patter, I get this error:
Quote: root@sslf:/home/sslf/Essential# ./wmii bash: ./wmii: is a directory root@sslf:/home/sslf/Essential# ./wmii/wmii.SlackBuild tar: /home/sslf/Essential/wmii-3.6.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now root@sslf:/home/sslf/Essential#
I'd like to find a window manager that has mouse support but can also be set up (with least difficulty) in a dual-mode way, similar to Vim.
Here's how it'd work: some simple shortcut like ctrl-space would go into command mode. Ideally, there'd be a visual indicator of the mode, like a few pixel wide line on top of screen that turns green/blue with a configurable colour.
Commands would work like this:
Not essential, but would be nice: shade/darken all but current window, like a setting in Compiz.
I've heard about WMs like Ion, awesome, etc. Which one of them, if any, would be best to modify to work in this way? A big bonus would be if it was scriptable in Python, but I'm not counting on that..
Sometimes (one boot in five?) the Window Manager fails to load at start-up.I can force it to load with Compiz Fusion menu, but would really like ubuntu to load it properly at start-up.
I have a pretty vanilla install of Ubuntu Lucid. I would like to change my default WM to sawfish. I have it installed, and it works routinely, I would just like to have it start automatically on log-in, rather than Lucid. A few sources have suggested that the way to do this is during log-in. They refer to a "session" I could choose, which would allow me to set the WM. I remember doing this in the past, but can't find such an option on the login page, now.
I have also experimented with changing .gconf/desktop/gnome/applications/window_manager/ using both gconf-editor and emacs. However, when I change "/usr/bin/compiz" to "/usr/bin/sawfish", log out, and log back in, I find that compiz starts anyway, and the setting in that file has been restored to compiz. Clearly, the gconf mechanism is getting the information from some other source.
How can I check what window manager (compiz/metacity) I am using in the terminal? I know how to change from one to the other or to just visually see what is currently running, but I need to know a way to check in the terminal for a script. How can I do this?
I just upgraded Ubuntu from 9.10 to 10.04 and am having a problem with the window manager. When I log in and after it applies my background and the panels load, the window manager doesn't start right away, so if I open a program it won't have a top to it. I have to turn on Compiz, which turns off every time I turn on the computer. If I set it to normal, it searches for drivers and then the tops of windows appear. I have had to do this every time since I upgraded. I would do a clean install, but I have no way to back up my data since I have so much. How can I fix this?
Just upgraded to 10.04 and when I log into kdm to find nothing on the desktop. It seems the problem is that the window manager doesn't even load. kde-window-manager is installed but still nothing. What did this upgrade do and how can I fix the window manager?
I would like to change my default window manager to sawfish. There are many instructions on the web to install sawfish, log out, then select sawfish, then log back in. This worked for me with karmic, but I'm not seeing any way to select a window manager during the lucid log in process. (Sawfish is running fine if I start it with "killall compiz && sawfish &" during an ongoing session.)
I know that it is possible to run awesome window manager in gnome but is it possible to do this in LXDE? Is there anyway to use any tiling window manager in LXDE (as is possible in gnome)?
I changed the Panel and Window Manager.I'm using Unity 2d and I forgot what the default values are.I did it using Ubuntu Tweak but you can also do it with gconf-editor or throught the terminal, of course.Using Ubuntu Tweak under Startup > Session Control what are the default values for Panel and Window Manger?
I've managed to completely ruin my system for like the millionth time.
Basically my story is this. I cannot seem to run both unity and a window manager/decorator at the same time. Perhaps it is partially because I am not entirely sure what the current window manager is these days.
I thought it was metacity since that has been the default in the past. I ran a code...
I would really like to be able to move windows. I am typing this from my web browser which is permanently stuck in the position it launched in on my screen.
I see in this thread the poster wanted the "old ambiance" look.[URL].. Well, I don't mind the new Ambiance look, but my window manager tool bars have reverted to "Old Win 32". They have gone flat and gray. The window bars still look rounded and dark. After I first log in, the window manager looks fine, and then it flips Flat and Light Gray. I've logged in using the "Ubuntu Classic" setting. Someday I'll learn "Unity", but I'm trying to get some work done. I'm running this system in a virtualbox. Irrelevant, right?
Just been looking at an 11.04 bootable CD, where I was reminded of the continued existence of xfce. "Must try that again!" I thought, and installed it through the Software Centre on my 10.04 laptop. I washoping/expecting that xfce would then become an option in the Sessions pulldown at log-on, but no such luck. What should I be doing? It is not my intention to switch to xubuntu, just to take another look at an alternative window manager.
Many times now when I boot up, xfwm4 seems to crash, leaving me with a static desktop. I can open a terminal and type: xfwm4 and it restarts with all its compositing loveliness.how I can investigate the cause of this and fix it?
Yet another problem, but I need some input here. I just updated and restarted my computer (lots of updates), and when I logged in all of the window decorations are gone as well as alt-space and alt-tab doing nothing. Thinking that the update messed with the WM settings, I opened the settings manager up, but both the Window Manager and Window Manager Tweaks section are blank. The other sections are fine, just those two. (and no, I'm not doing Unity, KDE, or Gnome) The panels appear to be functioning correctly, though my workspaces got smashed as well.
Edit: Upon closer inspection, I can no longer add workspaces, I set the number of workspaces to 4, but it only shows one in the list below
Edit 2: Upon creating a new user to mess with themes, the WM was working fine in the new user, same problems in this user.
In Ubuntu, I run Compiz/Metacity, but I also have wmii installed. I know how to change to wmii for a one-time log in, but I don't know how to make it default for specific user.
I spent *#@$ hours trying to figure out how to change my default window manager to "compiz-manger".I tried using gconf-editor and .gnomercAnybody has an idea how to do this?
Is there anyone out there that doesn't use a window manager like KDE/Fluxbox/etc.? What do you do without a graphical interface? I remember my days in DOS and how horrible that was. I know many people still love that and probably don't use a window manager.but how do you do things without it? How, and what, do you do in a command line world?
