Just upgraded to 10.04 and when I log into kdm to find nothing on the desktop. It seems the problem is that the window manager doesn't even load. kde-window-manager is installed but still nothing. What did this upgrade do and how can I fix the window manager?
View 1 RepliesI started the upgrade to 10.10 and now the upgrade process is trying to get some input in the orange window. Problem is I can't bring that window to the front because metacity crashed. When I try to start metacity from a console it dumps core. How do I continue the upgrade?
View 1 Replies View RelatedThe upgrade appeared to go smoothly, but now logging in to a normal session just gives me a desktop wallpaper and nothing else.If I log into Gnome-Failsafe then I get a panel and desktop icons back, but still no window managerI have to initiate metacity manually.Wondered if it was something to do with my messy personalisation settings, but a new test account I created has the same problem.
View 4 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
as per the title - after a hard disk failure got new disk and attempting dual boot of xp and 10.10 - had to burn 10.10 twice to get it to complete the install process, but thats another story - basically on logging in there is now gnome panels - i get my 'low battery' warning etc and the login music but thats it - it does work in 'safe mode' though - what can i do to correct this?ironically had exactly same problem on the upstairs desktop when upgrading to 10.4 but buggered if i can remember how i fixed it - even checked my previous posts on it.
View 9 Replies View RelatedI recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies View RelatedI tried to install Compiz on F9 Gnome and I added a startup entry (system, preferences, personal, session, startup programs). Now I can't log in to the gnome window manager, it logs in and then logs out again. I would like to remove the entry that I created in the startup programs, but I don't know which file to edit. Where the settings to the System > Preferences > Personal > Session > Startup Programs are stored.
View 1 Replies View RelatedI've been searching for tutorials on how to install awesome, it would be nice if someone can guide me on how to install Awesome Window Manager.
View 2 Replies View RelatedI'm fairly decent Linux admin (ok, i've been paid to do it for the last 10 years now, maybe better than fair), however this problem has me stumped. Ever since i dist-upgraded to 10.10 playing flash videos longer than a minute will *sometimes* lock up my window manager. I am unable to click on other windows, or links in current window. If i open a terminal after starting the video i can still run commands in the terminal after its locked up, but not use the mouse in any form at all.
I can get to tty1 or any other console, kill flash, kill the browser, etc. Until i restart gdm or kdm it is still locked up however. I have tested with both kde and gnome. Tested with kdm and gdm. Tested with firefox and chrome (both use different installs of flash plugin - chrome brings its own). I created a new user on the system to test enviroment, no luck there. I eventually reinstalled yesterday with a fresh 10.10, and still I am having this problem. It *often* happens, but not always. Always on videos longer than about a minute at a guess, i have not timed it. Only ever happens on flash videos - ie ..... etc.
I like to start Emacs as part of a login script and leave it running for the duration of my login session (which is typically weeks).
I have scripts to call emacs-client which will allow me to use a file-manager or Windows Explorer to locate files and right-click to edit them in Emacs.
I often end up with a lot of emacs windows (frames) open and I like to just be able to close them by clicking on the MS-Windows or KDE X button at the top-right.
The trouble is, if the window is the last one, this will shut down emacs which will lose all kinds of interesting history information.
As a work-around I use C-x 5 0 which won't let me close the last frame but this is often not as convenient as using the mouse
Does anyone know how to configure Emacs so that it can intercept the Window-Close button of the last frame to either request confirmation or simply disallow it?
On MS-Windows, disallowing closing of the last window may cause logoff to hang if emacs is still running but I'm not too worried about that.
I did remake my minimal installation. My window manager produces no background picture else I did add someone. So i will do it using xorg-xli. I did find the (in other cases usual) xinitrc as /etc/X11/xinit/xinitrc but in only refers to an other script
and the other script (/etc/X11/Xsession) does not include some usuable steps to include easily supplementary starting commands.
Where is to do that in Debian SID actually?
I have installed the debian lenny base system in my old pc. I want only a minimal system with a small window manager like icewm and firefox to surf the web. What I need to write now in text mode to install this minimal system?
View 9 Replies View RelatedI just upgraded to 10.04 (from 9.10) and I must say that I absolutely hate the new window layout with the buttons on the left. I found a post that helped me switch them back to the right however, when I open any system applications (like control panel) the window has no top panel at all. Really annoying.
View 1 Replies View RelatedI upgraded to 11.04 this morning, and I just flat out have zero window decorations which is a serious problem. This pretty much means that where windows happen to spawn is where they're stuck as I cannot move them ( aside from chrome which has its own I believe. )
This happens in Unity and Gnome-panel, fluxbox remains unaffected. I've completely removed, reinstalled unity and compiz several times now. That's not the problem. I've tried pointing the window decorator to /usr/bin/gtk-window-decorator but I might as well be shouting at a wall for all thats doing.
running unity --reset is have zero results as well. If it matters at all my video card is an ATI HD Radeon 4650, and yes I've uninstalled the proprietary driver and reinstalled it ( I get the same results with the open source driver ). Also if it makes any difference I'm running 64 bit.
I upgraded to 10.04 but problems started very quickly: I can see my desktop but when I start an application, there are no window borders or buttons to close/minimize that application! They just vanished. Also, opened windows don't appear on the taskbar, so I can't switch between windows, not even with ALT + TAB. The mouse isn't an arrow anymore, but a dark cross :s
Some specifications: Dell vostro 1000, ATI Radeon IGP Xpress 1150 (128mb shared), AMD64 Turion Here is what I did during the upgrade: everything default, except for once, when it asked me what to do with menu.lst (keep the old one or replace it with the newer version) I chose "replace" (default was to keep the old one). Can that be the reason?
I'm now using Ubuntu 9.04 and I think of upgrading it to version 10.04 (when it shall be "stable").I'd like to know if I am supposed to modify /etc/apt/sources.list with the name of the new version even though I upgrade by "update-manager-core" with the command sudo do-release-upgrade
View 1 Replies View RelatedMy gf recently upgraded her Dell laptop from Karmic to Lucid but has since experienced some issues with the windowing system. Is called Metacity? - I'd call it the "chrome" of the windows, eg. the title bar, maximise & close buttons etc.The description of the problem she's given me is as follows: "Every time I turn my laptop on it comes up with a small window and when I access the internet, it wont let me maximise/minimise the window.
I have to go to System/Appearances/Visual Effects and reset it to Normal. This then resolves the problem. But the next time I open my laptop, the settings have been forgotten and I have to go through the same process again." It's taken me ages to steer her away from windows but she's had a few problems since upgrading and she's thinking about heading back to the "dark side"...
I am would like to upgrade my 8.04 LTS to 10.04 via the upgrade-manager. But upgrade-manager just propose to my 9.04 and not 10.04. Of course I do not want to go by 9.04 then 9.10 then 10.04 Is it possible to pass from 8.04 to 10.04 via upgrade-manager ? or shall I burn a CD and install it.
View 5 Replies View RelatedUpdate Manager wants me to update to Firefox 3.5.7. I'm currently running 64-bit Firefox 3.5.6. I'd like to update, but Update Manager says nothing about this 3.5.7 being the 64-bit version. If I upgrade from the UM, I don't know if I'll be getting 32-bit or 64-bit FF. How can I tell beforehand which one I'll get?
View 4 Replies View RelatedAs stated on the title Ubuntu 10.10 does not appear on the Update Manager in order to do the Upgrade. I really don't want to download it and burn it on a CD in order to Upgrade my Laptop. My current version is 10.04 LTS.
View 4 Replies View RelatedThis is my fourth on-line upgrade from Gutsy (started with Dapper ...) all the previous one went without a hitch !
So I was pretty confident this afternoon upgrading my Lenovo laptop from 9.04 to 9.10.
At one point during the install, I got error messages and was offer to do a "Partial Install". I accepted, different things happened, rebooted. Update manager came on with again the partial update pop-up. Accepted it again, it downloaded more files, rebooted, partial upgrade window again but it failed immediately.
The network connection was gone, clicking on the network icon I got a message that the network manager is not running.
I cannot check or uncheck the "network unabled" choice.
However, 9.10 is running, slow and weird, but no network connection so I cannot try to finish the "partial upgrade"
Every time I reboot the Update manager pops up.
Trying to boot any previous version in "grub" fails right away saying it is unable to mount the drives ...
Is there a way to start the Network Manager from a terminal ?
Basically, the update manager pops up and... nothing happens. It checks for updates but doesn't indicate upgrade availability.Running other commands like apt-get distribution-upgrade also doesn't do anything.
I think the problem is the fact that I've installed a bunch of software from rep's and ppa's via ubuntu-tweak that are more recent than the ones in Ubuntu's rep, but I can't been sure.Also, I've deactivated all third party rep's and ppa's, but I still have a bunch of software installed via those sources.
I'm trying to do an online upgrade from 8.04 to 10.04 using the update manager. Since update manager did not indicate that there was and upgrade, I used the update-manager --devel-release command to initiate the process. The upgrade stops during while looking for channels with the following error message:
A problem occurred during the update. This is usually some sort of network problem, please check your network connection and retry.
W:Failed to fetch
http://archive.ubuntu.com/ubuntu/dis...kports/Release Unable
to find expected entry main/debian-installer/binary-i386/Packages in
Meta-index file (malformed Release file?)
E:Some index files failed to download, they have been ignored, or old ones used instead. I don't believe this to be a network problem because it fails in the same place every time. I don't see the entry for debian-installer in the Release file which I believe is why the error is occuring, however, I'm not sure what to do about it. It seems like something is pointed to the wrong place. I've maintained this system with update-manager for several years and never had a problem.
I was so impressed by the screen-shots of 10.04 LTS that i wanted upgrade via the update manager( am using karmic 9.10).Everything went well with downloading the new packages till the point of installation of downloaded packages. Halfway through the installation power went off and when i restarted the system it was stuck at some point with the message
Code: mount: nothing to mount in /dev or something like that. Then i restarted the system in recovery mode and ran "dpkg" to fix broken packages hoping it would fix the issue.It did to some extent that i was type the problem here through the affected system.
The problem is i couldn't send the crash report the first time around and i can't get hold of it now.My system is somewhere between karmic and lucid ("About Ubuntu" shows as karmic and System Monitor shows it as lucid").So i how do i get a clean installation of lucid?
I'm noticing that maybe twice a month the Update Manager is asking me to upgrade my kernel. Currently it's asking me to move to 2.6.32.24.25. Is this the smart thing to do? Are these primarily securtiy updates to the kernel?
View 1 Replies View RelatedI just upgraded from 10.04 to 10.10 and now virt-manager won't start. If I try from the menu, nothing happens. If I try and start it from the command line (as root) it give the error:
GLib-GIO:ERROR:/build/buildd/glib2.0-2.26.0/gio/gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)Aborted
I've tried searching and can't seem to find anything related, but was hoping this might make some sense to someone.
I'm running Ubuntu 10.04 desktop edition on one of my machines and its connected to internet via network proxy with username/password authentication enabled.
I've provided proxy details in Synaptic Package Manager and also in System -> Preferences -> Network Proxy. I can see any new updated libraries when I check Update Manager, but somehow I do not see the notice of availability of Ubuntu 10.10 and hence not able to upgrade.
On my home laptop (Dell Inspiron 700m) which connects to internet directly and over there I was able to upgrade to 10.10
So I think there is some problem with respect to update manager where it cant see the new release available behind proxy.
Ubuntu Studio (no idea what version, no idea how to find out) Update Manager has been saying 10.04 is ready for quite some time, but I cannot install the upgrade. The first time, more than a month ago, it had problems with Java and aborted. This time it couldn't find a repository in NZ so it threw up its (virtual) hands and gave up. Should I even try to upgrade? I keep installing maintenance and security updates (except Adobe Flash Player which Adobe cannot identify). It does most of what I want it to do. Does 10.04 (or 10.10) really matter? Assuming I try for US 10.04 LTS again, how do I get it past its problems?
View 1 Replies View Related