I'm using ubuntu 9.04 and I installed sinhala unicode for my system. but I cant use wijesekara keyboard anywhere.but the phonetic based key board is working. there is the wijesekara.mim in /user/m17n folder. but when i trying to setting up lanuage the wijesekara layout does not exist.what is this problem and how can I solve it...?
View 1 RepliesI had 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard and set to work.
It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work!
I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there?
I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade.
[Code]...
I just upgraded from Jaunty Jackalope to Lucid Lynx.
I prefer to have the Keyboard Accelerators underlined at all times.
That is, I don't want them hidden until I press Alt.
Keyboard accelerators aren't accelerating my work if I have to wait a second or two to read what the underlined letter is after I press the Alt key.
On Windows there's a setting for this (Control Panel, Display, Appearance, Effects, Hide Underlined letters).
Where can I set this in Ubuntu?
I read that setting gtk-enable-mnemonics=1 in a ~/.gtkrc or ~/.gtkrc-2.0 file should do it. I tried that. Doesn't work.
I read that Ubuntu Tweak has a setting for it. I installed Ubuntu Tweak. I couldn't find the setting.
I have an Acer Aspire One D250. Just installed FC15 on it and for the life of me I can't figure out how to enable dvorak.
View 3 Replies View RelatedI have 4 computers and I currently have 4 USB cradles so every time I want to switch to a new computer I have to unplug the keyboard/mouse dongle and replug it in the appropriate cradle. I would prefer to connect the single dongle to a 4 way USB switch then choose the target computer by remapping 4 of the keys I don't need, for example:
View 2 Replies View RelatedI am running Arch Linux with KDE 4.5. I have a Microsoft Wireless Keyboard 3000 v2.0
At the top of the keyboard are 5 extra buttons numbered 1 to 5. These are in addition to the function keys.
I ran xev to determine the keycodes generated by these buttons and nothing results. The keys do nothing in xev. How can I enable these keys to use for desktop switching?
Is it possible to turn off the computer (Slackware 13.37 Box) simply using the power button on the keyboard
View 7 Replies View RelatedI just downloaded a Plain Text File that contains (what appears to me as) code that will 'unlock' functions of my MS keyboard, now what do I do with it? Here is a preview of some of the contents of the file from the beginning of the text.
[Code]....
.....and so on with different items. My goal in doing this was to enable the zoom button on the keyboard.
How can I enable "Keyboard layout indicator" in Gnome 3 Classic?
View 0 Replies View RelatedI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedHow to recompile squid under fedora 13 to insert this arguments ---> --enable-storeio=diskd,coss
View 2 Replies View RelatedI defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View Relatedhas bash a command that reads the keyboard status and exits? I want to write a loop of this form:
Code:
while [ 1 ] do
sleep (1)
[code]....
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
View 2 Replies View RelatedInstalling file sharing using eBox and get the following error:
[Code]///
I am trying to install the IDS component barnyard2 on RHEL 5. I am following the snort enterprise insall document by Patrick Harper. For installing barnyard, after the tar command it says to perform a ./configure --enable-mysql The --enable-mysql does not work: configure: WARNING: unrecognized options: --enable-mysql --with-mysql does work. Is there a difference? Next, using --with-mysql, I get a failure at the end:
ERROR! Libpcap library/headers (libpcap.a (or .so)/pcap.h) not found, go get it from Open Source and Linux Forums dot tcpdump dot org TCPDUMP/LIBPCAP public repository or use the --with-libpcap-* options, if you have it installed in unusual place. Also check if your libpcap depends on another shared library that may be installed in an unusual place I do a find / -name libpcap* and get:
/usr/share/doc/libpcap-0.9.4
/usr/lib/libpcap.so.0.9.4
/usr/lib/libpcap.so.0
/usr/lib/libpcap.so.0.9
/usr/lib64/libpcap.so.0.9.4
/usr/lib64/libpcap.so.0
/usr/lib64/libpcap.so.0.9
How do I tell the configure to use one of the above? I don't understand how to use the --with-libpcap-* option?
I've been running 10.04 on a partition of my Dell laptop successfully for weeks. Now, I get the login screen, and when I give my username and password and click "Ok" it logs in, looks like X starts, then immediately goes back to the login screen with the drum sound (is that a bell?). If I type the wrong password, it doesn't log in, so I know it's getting past authentication.
I've tried logging in as one of several users.
I've tried running in recovery mode and running "clean", running "repair packages" (it downloaded and installed a lot of packages), running in safe graphics mode (failsafeX). None of those had any effect.
I've tried looking in /var/adm/messages and looking at X logs that are presented in safe graphics mode. I see tons of stuff, and none of it obviously stands out as an error.
It is likely almost out of disk (maybe 300M left?), but I can't find evidence that that is causing this problem.
I'd like to somehow repair my Ubuntu install without wiping it.
I would like to enable more tty's.
I am using Maverick Meerkat .
After reading some about it, it seems that I could copy and rename any
off tty /etc/init/ttyx.conf (expect tty1 which is special for security mode _and_ normal mode)
But after reboot whit tty12.conf - the screen went wired and a lot of error-messages was all over the screen, so I had to remove it again.
I followed these commands to disable pulseaudio in ubuntu 9.10 and now it seems I've broken gnome-volume-control. How can I go about undoing these changes???
Code:
touch ~/.pulse-a11y-nostart
echo autospawn = no|tee -a ~/.pulse/client.conf
killall pulseaudio
i have already checked system>preferences>screensaver. activate screensaver after 8 min of idle but i just get a black screen?when i click preview it does show the screensaver, but it doesn't show after 8 min idle
View 5 Replies View RelatedHow to enable WMM/80.11e QoS ?
View 1 Replies View RelatedI've been trying to enable DVD playback ever since last night now and I've been following the instructions on this page: [URL]. And I've downloaded the xubuntu-restricted extras. But every time I run the command:
sudo /usr/share/doc/libdvdread4/install-css.**** works, but Connecting to packages.medibuntu.org|88.191.82.11|:80 always times out. I'm using xubuntu 9.10.
i have added the hardware sensors monitor to the panel and enabled....but i can only enabled my hardisk temp(i.e. hddtemp)...but there is no option of cpu.....how can i enable my cpu temp??
View 5 Replies View RelatedI bought a new ve server from Media Temple, but can not figure out how to enable/install/whatever FTP access to it? I just want to set it up so I can use transmit on my server. Do I hace to install FTP? What is the best way to do this?
View 7 Replies View Relatedis there any known way to enable any type of 3-d anything on ubuntu? something like 3-d vision from nvidia? i have that for windows, and i know its only compatible with direct x.. but is there any work-around to have something similar for the desktop or the cooliris firefox plugin, or anything at all?
View 6 Replies View Related