Ubuntu Networking :: How To Enable WMM / 80.11e QoS
Mar 18, 2010How to enable WMM/80.11e QoS ?
View 1 Replies
ADVERTISEMENT
Ubuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedUbuntu Networking :: Network Manager Applet Enable Networking Unchecked
Apr 2, 2011Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
Ubuntu Networking :: Networking Widget Fails To Enable Wireless Card / Fix It?
Apr 30, 2011I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
Ubuntu Networking :: Must Disable Then Enable Networking For Wireless?
Jan 29, 2011My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 Replies View RelatedCentOS 5 Networking :: Install The Latest Kmod-r8168 Rpm - It Failed To Enable The Networking Support
Dec 30, 2010I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:
# yum --enablerepo=elrepo install kmod-r8168
The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).
First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):
# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up
Once I do this, I have network connectivity.
Fedora Networking :: Enable Wireless Networking Does Not Work In Windows?
Jun 20, 2009I've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
Ubuntu Networking :: Enable FTP For PHP On System?
Mar 4, 2010I'm just want to know how i could enable FTP for PHP on a ubuntu system... I found a few links but they mostly say that when you install it you have to run
Code:
./configure --enable-ftp
How can i enable it if PHP was installed when we set up the server the 1st time?
Ubuntu Networking :: How To Enable Ports In 10.04
May 8, 2010Does any body know how to enable ports in ubuntu 10.04?
View 2 Replies View RelatedUbuntu :: How To Enable Wireless Networking
Jun 13, 2010When i click the network manager icon it just says under wireless networks "Wireless network is not enabled" How do i enable it?
View 9 Replies View RelatedUbuntu Networking :: Wireless Will Not Enable?
Sep 6, 2010I used the windows executable wubii installation for xubuntu 10.04 I'm not dual booting.My problem is all indications in the user interface are selected "enable networking" "enable wireless" and my wireless switch was on throughout and was connected to the internet during the installation in windows.However
Code:
sudo lshw -C network
Returns
[code]....
Ubuntu Networking :: Does Not Enable Wireless / Why Is So?
Jan 14, 2011I am a day old in ubuntu-world, and I am having internet issues. Yesterday, after i had installed ubuntu alongside windows 7. To begin with it did not detect wireless (not networks but wireless itself), so i figured it was something to do with the adapter and came to these forums where many things were suggested. none worked. So I restarted the system for good measure and lo and behold it detected wireless networks and connected to the internet almost immediately.
Now, after a day, when i have logged in to ubuntu again, there is no wireless detected. The same problem. When I right click on the network icon in the notification area i see that Enable Networking is checked but "Enable Wireless" is darkened. There is no way to check it.
Can anybody please advise as to what to do next. I am using ubuntu 10.04 LTS (Lucid Lynx I believe).My system config is i7, 512MB ram.
Ubuntu Networking :: Won't Allow To Enable The Wireless
Feb 7, 2011my computer-toshiba satellite currently running on ubuntu 10.10 i cant connect to wireless except when im at my parents house not to sure why it was working now all of a sudden it stopped while i was using 10.04 figure when i upgraded to 10.10 it would fix it self ..didnt happen so im stumped when i right click on the satelite it the top right of my screen it shows-
-enable networking-(witch is checked)
-enable wireless-(witch willnot allow me to click it)
-enable notifications-(witch is checked)
-connection information- (wont allow)
-edit connections..-
-about-
dont know why it wont allow me to enable the wireless
Ubuntu Networking :: How To Enable Bluetooth Under 11.04
May 25, 2011I upgraded from 10.10 yesterday. The Bluetooth is disabled. Even when I click on Blue Tooth on, it doesnot get highlighted or detects the nearby devices. In 10.10 , it worked just fine.
View 9 Replies View RelatedNetworking :: How To Enable Rhn
Feb 11, 2010How to enable rhn?
View 1 Replies View RelatedUbuntu Networking :: Can't Connect To Internet / Enable This?
Apr 30, 2010I don't know if i should of put this in either Networking or Dell Forum. But here goes. I have a Dell Studio 1535 Laptop, and i have downloaded the new ubuntu 10.04
The problem is, is that i cannot get a internet connection. On my laptop there is a wifi sign that lights up if it works, and it didnt when i booted it. So i thought i have the driver downloaded and i tried to install it and it installed but after it crashes, so that failed. And then i tried via Ethernet and it does not connect when i connect it to the router!. It just says disconnected everytime .
I have tried to reboot, just incase it was a bad boot or something, and i stil get the same. It just will not connect to the internet
Ubuntu Networking :: Not Able To Enable Wireless / Sort It?
Jul 7, 2010I have recently installed ubuntu on my laptop. However I cannot enable the wireless on it. The card is registered and drivers are installed. From reading previous forums i can guess that its because its "Hard Blocked"" (assumptions). However the switch for it is in the on postion.
View 2 Replies View RelatedUbuntu Networking :: How To Enable Wireless On Command
Jul 21, 2010I have a LG S1 PRO, that to activate the wireless is necessary Fn + F6. How do I enable wireless on command? Since you can not activate in ubuntu with these keys.
View 9 Replies View RelatedUbuntu Networking :: How To Enable Loopback Connections
Aug 22, 2010I run a webserver Apache2, php5, and MySQL. They are all set up correctly and I can access my website at [URL] I have, also installed, noip2 to update my IP address to no-ip.com for my domain name. Here's the problem: I can access my website through that domain name on other computers, both on internet and on the same network. But I cannot access it from my own computer (using the domain name instead of localhost). I need to be able to access the domain name on my computer because some pages on my website have been defined as the address to my domain name and not localhost. I cannot change this to localhost because if I do then people outside cannot work the webpages correctly. I had the same troubles on Windows before and I simply enabled loopback connections by typing in my private IP address along with the domain name into the Windows hosts file. I use version 10.04.
View 3 Replies View RelatedUbuntu Networking :: Wireless Disabled - How To Re-enable
Aug 22, 2010We're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
Ubuntu Networking :: Wireless Disabled / Enable This?
Sep 10, 2010I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
Ubuntu Networking :: Enable Wireless On Startup?
Oct 8, 2010I have been having some problems with my wireless connection. I am having to start my computer 2 times in order for my wireless connection to work. The first time I start up, even after I enable wireless it wont connect. If I reboot immediately and enable wireless it will then connect. I would like to be able to fix this problem since it has become really annoying to me to have to boot my computer 2 times every time I turn it on. BTW Network manager shows auto-connect, however it also shows i month ago as to the last time the connections were used.
View 2 Replies View RelatedUbuntu :: Disable / Enable Networking Each Boot
Oct 13, 2010I have a strange problem with my networking under Ubuntu. When I first log in to Gnome both my network adapters are listed as "disconnected" in the network manager applet. If I right click on the notification icon and disable networking, then wait a few seconds and re enable it, it works fine.
It's happening consistently with Maverick although it seemed only temperamental with Lucid. I did a fresh Maverick install to see if it would help but it hasn't.
It's the onboard network sockets on a Gigabyte GA-X58A-UD7. I have two ports but I only use one, it doesn't seem to matter which I use. It's connected via gigabit ethernet to a Netgear router. It works fine in Windows 7 (dual boot).
It looks as though something's not quite "ready" when gnome first launches. The light on the router for the cable is off at first, and only comes on after a few seconds. It's DHCP. Same thing happened on the live USB stick (just before the isntaller) and disable/reenable made it work.
Ubuntu Networking :: How To Enable Wireless Adapter
Nov 28, 2010I am newbie at linux and Ubuntu and I have some problems enabling my wireless. I have spent many hours searching for solutions and couldn't find one for me (maybe don't apply it right - I am newbie). I have HP Pavilion dv6, dual boot Win7 and Ubuntu. At Win7 wireless is ok but at Ubuntu I can't enable my wireless adapter, so my laptop can't recognise any wireless network.
View 3 Replies View RelatedUbuntu Networking :: Can't Enable Networks In The Applet?
Jan 31, 2011I'm using Ubuntu 10.04 on my old HP laptop, and I can't enable ANY networks (ethernet and wifi) with the NetworkManager applet.This started after suspending the laptop. It wouldn't wake up, so I had to make a button shutdown.The "Enable network" checkbox apperars unchecked, but when I click it it doesn't get checked.The interfaces themselves are enabled and working, since the led on the ethernet plug is lit, and I can get a wifi AP list with iwlist scan (but I have to enable the wifi card first with ifconfig up)
View 7 Replies View RelatedUbuntu Networking :: Enable Wireless Injection?
Apr 13, 2011How can I enable wireless injection?
[code]....
Ubuntu Networking :: How To Enable Wireless Connectivity
May 15, 2011I am new to linux. I just installed linux on my PC and wanted to configure wireless network connections. I have entered SSID and mode is set to infrastructure. I don't know what is BSSID do I need to enter MAC address (of router?)?I need to connect to internet wireless can you please guide me ?
View 1 Replies View RelatedUbuntu Networking :: How To Enable Wireless Network In 10.10
May 25, 2011I have an Averatec 3200 laptop with a Intel PRO/Wireless 2200BG card. When I click on Network Connections, it says wireless is disabled. I checked my /var/lib/NetworkManager/NetworkManager.state file, and it said "wireless enabled=false" so I changed it to true.
It just goes back to false on reboot. I also ran rfkill unblock all, but rfkill list still shows that there is a hardware block on. The driver for this wireless card shows that it is installed. I'm not sure what to try next!I just bought this computer used, and freshly installed Ubuntu 10.10 on it, so can't say if it worked in any other distro.
Ubuntu Networking :: Enable Wireless Through Terminal?
May 26, 2011i have jolicloud (i think it uses gnome) on my hp mini 110 and my internet has been working fine and everything until for some dumb reason i pushed the wireless on/off button on the front of the computer. normally on windows i would just have to push the button again but its not working with linux. how can i re-enable my wireless?
View 7 Replies View RelatedUbuntu Networking :: Wifi Unable To Enable?
Jul 26, 2011I have recently installed 11.04 on my ASUS EEEPC 900 and am having problems with getting the wifi enabled and able to pick up any signal. It has a broadcom device in there and although I have downloaded the patch that should be able to fix it Im unable to install it.
View 4 Replies View Related
