I have 4 computers and I currently have 4 USB cradles so every time I want to switch to a new computer I have to unplug the keyboard/mouse dongle and replug it in the appropriate cradle. I would prefer to connect the single dongle to a 4 way USB switch then choose the target computer by remapping 4 of the keys I don't need, for example:
View 2 Replieshow to disable gstreamer???? (and be able to re-enable it also?) i don't want to totally remove gstreamer - as it is required by alot of software. however, when i am using
proaudio apps with low-latency having gstreamer enabled is a problem. this is because ( i think ) that my crappy intel-hda (STAC9200) only has one sub-device, while many other cards have multiple.
so when gstreamer is there, i will get more xruns, and a nasty message in dmesg, something along the lines of "intel-hda switching to polling mode". overall performance of the card will suck. BUT! if gstreamer is NOT there, i can run low-latency(2ms) with pretty much no xruns(jackd). the only time i get the odd one is if i am switching drum banks in a wine VST.
well, i remove pulseaudio when i install Fedora, gstreamer doesn't work properly after that, you can't use rhythmbox, or anything. but you will get much better latencies and generally the card is very useful. ie: i can manipulate many sounds/samples/synths in realtime, or actually record in ardour with a decent load...
Sorry but I'm a new user and would like to know how to enable/disable firewall. I have tried to open a port up on my firewall but, for some reason that didn't work. I have found these command in another thread: $ sudo /sbin/chkconfig iptables off
$ sudo /sbin/service iptables stop
I assume this is to disable the fire wall. How do I enable it once I'm finish running my program.
I've downloaded from the Ubuntu software center a touch-pad application that allows me to set some preferences to my touch-pad. So since I rather use a mouse, I've disabled it, the problem is, it only keeps disabled for a few minutes, later it works again. So I want to keep disabled until I enable it again, any suggestions?
View 3 Replies View Relatedis there a way to enable/disable specified hardware? Allow me to explain, i have 2 wireless adapters, one integrated and one USB, i want to use the USB adapter for 5Ghz 802.11n and the integrated wifi adapter in my system is the one ubuntu is defaulted to.. i have the drivers for the USB device already installed i just need to disable the integrated device.
View 3 Replies View Relatedknow whether it is possible to disable +5V supply on USB and enable it again?
View 4 Replies View RelatedI want to make a kernel module that its function is like ifup/ifdown. However I could not find any way to do that.
View 2 Replies View Relatedhow to disable/enable easystroke with commands like
Code:
easystroke --enable [--disable]
Anyway, according to the release notes, RHEL 6 has a PAE enabled kernel by default. Great... But that leaves me wondering why uname report SMP. Further, I'm provisioning some systems for QA use, and they're asking that PAE is disabled. My thinking is that since RHEL 6 requires PAE capability to install, there may be no way to disable it and the googling I've done seems to support this. tl;dr Why does a default kernel with PAE enabled report SMP on RHEL 6?
View 7 Replies View RelatedSince last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
I'm looking for some definitive instruction on the proper way to enable/disable (not to simply start/stop or add/remove packages) services/daemons under Debian 6. Google results are all over the map and, surprisingly, the Debian wiki has no abstract on services.It seems like such a common task
View 14 Replies View RelatedI have a computer that runs debian 6, and i want to make a dual boot system where i can boot either with or without desktop. AS default the server will be booting in console (headless) mode (and act as server) but on some occasions i do want to bootup in desktop.
I know starting GDM (in my case the desktop manager) is just a simple task, but i would like to have 2 options in boot menu:
1 - without desktop default (timeout 5 seconds)
2 - with desktop
what would be the correct grub config entries?
Basically what I'm wanting to do is only have one USB keyboard connected active/enabled at any given time. i.e., enable B1D14 and disable B5D2, then enable B5D2 and disable B1D14. I'm actually wanting to enable/disable at the root hub. Something analogous to mount/umount a device instead of a file system.
ramack@ramack2:~$ lsusb
Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard
Bus 001 Device 012: ID 0781:5544 SanDisk Corp.
Bus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Can somebody tell me how to enable/disable a pci slot.I am trying to do a hotplug on the pci slot.Is it possible in Open SUSE? If its possible can somebody please tell me how to do it.I was doing some research and went over the following topics hwup, hwdown, sysfs, but nothing worked.My confidence on Linux OS is pretty high and am sure there should be a way!
View 1 Replies View RelatedI am able to get my touchpad to enable disable from the bash shell using
Code:
sudo modprobe -r psmouse with or without the "-r" to turn it on or off, respectively But I wanted to write a script to do this for me because "mouseon" and "mouseoff" is easier for me to remember and more convienient. But I am having some issues (I am a complete newb at scripting, so forgive my ignorance)
the script written is:
Code:
#!/bin/bash
#enable/disable touchpad
sudo modprobe -r psmouse I have saved this script as "mouseoff" in usr/bin (echo $PATH told me this was a directory bash searches, even though it was not a directory and I had to create it with mkdir).
then I did Code: chmod 755 mouseoff However, when I try to run it, I get a "permission denied" error.Can anyone help me with what I am doing wrong?
Ubuntu 9.10 64bit
Compiz is installed and running on this OS
$ apt-cache policy compiz
Code:
compiz:
Installed: 1:0.8.4-0ubuntu2
Candidate: 1:0.8.4-0ubuntu2[code]....
How to disable compiz temporarily and re-enable it?I can't find System>Preferences>Compizconfig Settings Manager
I just finished the update. Though everything seems to work just fine hardware wise... somehow it was decided that I'd prefer netbook remix over the standard install. I hate it! I can't seem to find any way to get the standard desktop mode back, and I feel like after the upgrade, my fan has been working overtime for some reason.
Can someone point me in the right direction to disable netbook remix? I really cant stand it.
I have a strange problem with my networking under Ubuntu. When I first log in to Gnome both my network adapters are listed as "disconnected" in the network manager applet. If I right click on the notification icon and disable networking, then wait a few seconds and re enable it, it works fine.
It's happening consistently with Maverick although it seemed only temperamental with Lucid. I did a fresh Maverick install to see if it would help but it hasn't.
It's the onboard network sockets on a Gigabyte GA-X58A-UD7. I have two ports but I only use one, it doesn't seem to matter which I use. It's connected via gigabit ethernet to a Netgear router. It works fine in Windows 7 (dual boot).
It looks as though something's not quite "ready" when gnome first launches. The light on the router for the cable is off at first, and only comes on after a few seconds. It's DHCP. Same thing happened on the live USB stick (just before the isntaller) and disable/reenable made it work.
can anyone please provide useful command for :
1)ways to enable/disable OS service(FTP/Email/Web server/Firewall/telnet/Lan file sharing)
2) basic interaction with the OS ( checking information/Open Files/Running Program)
3)Boot-loading configuration and customization
4)installation/uninstallation of programs/system patches
5)System configuration(Time setting/Date setting/User login detail change/Access right control)
how do I enable or disable the global menu bar?
I used it for a while and got used to it. Then I pressed something (I don't know what) and the global menu bar disappeared and the menu now locally appearing in all windows.
I have just bought a used Lenovo Thinkpad R61. Most of the things works in Squeeze like it did with Vista. But a bit annoying is that when i Vista with the "Fn-F5" could turn both wireless and bluetooth on and off. Now it is only wireless that works that way. On the top panel i can turn both wireless and bluetooth on and off, but it is still annnnoying. Is the a way to make all keys funktion on my Thinkpad?
View 3 Replies View RelatedHow can I Enable/Disable USB port(USB Drives)?
View 1 Replies View Relatedhow to enable or disable wifi on backtrack 5?
View 3 Replies View RelatedI have just installed ssh-server in my Ubuntu 10.04, and really want to know how to enable/disable it and I also want to be sure if the changes will take effect after the next boot or not, and how to do that?
View 8 Replies View RelatedI just finished setting up my slack machine as a home server (printers & files) and I noticed that I have an IPv6 address (from ifconfig)... I didn't know I did. I used to work in tech support and when a windows or OSx machine didn't connect properly on a LAN, disabling IPV6 was a common troubleshooting step. Is there a way to easily turn inet6 connectivity off/on in Slackware? (I want to keep the ability to get an IPv6, we will all use those in the future)
View 2 Replies View RelatedFirst time user of ubuntu on a resurected laptop.Upon boot up, I get an irritating series of beeps as if a button is being pushed down.I'm guessing it's the 'W' as I'm not able to use it after I log-in.Looking for simple instructions on how to disable the 'W'.
View 9 Replies View RelatedI have an Acer Aspire One D250. Just installed FC15 on it and for the life of me I can't figure out how to enable dvorak.
View 3 Replies View RelatedI'm using ubuntu 9.04 and I installed sinhala unicode for my system. but I cant use wijesekara keyboard anywhere.but the phonetic based key board is working. there is the wijesekara.mim in /user/m17n folder. but when i trying to setting up lanuage the wijesekara layout does not exist.what is this problem and how can I solve it...?
View 1 Replies View RelatedMy laptop has a some multimedia keys for quick access. They are causing a common issue with many HP laptops easily found on the Internet ( volume keeps turning up and down). Apparently the ultimate solution is to simply disable this buttons. On the next page, under the title "Multimedia Keys" it is explained how this QuickPlay buttons had to be enabled to work in Etch. URL....Now, I have installed Jessie, and I do not know if thew were automatically installed or not. But they are causing a very annoying problem. I want to simply disable these "Multimedia keys" so they do not produce any input.
View 1 Replies View RelatedIn Fedora 11, we could use from:
System -> Administrators -> Software Source
for enable or disable repositories, by Check boxes. For example we disable rawhide or testing repositories! But in fedora 12 I don't see it in System -> Administrators -> Software Source! How I can enable or disable repositories, by Check boxes in Software Source?