I am new to Ubuntu linux and recently installed it on my computer. I did a system scan and this is what it said, ML Parsing Error: not well-formed Location: file:///media/Cruzer/submission.xml Line Number 4807, Column 53: Checking for hardware/setup problems... [#[33mWARN] What exactly does this mean and what is a possible solution
View 2 RepliesI'm getting this error (uniquely when trying to access Auctiva-managed pages in eBay):
Code:
XML Parsing Error: not well-formed
[URL]
[Code]....
(To be accurate: the arrow is pointing to the second & in '&&' in the error message as presented. I don't know how to reproduce that precisely).
I assume this is because I have replaced the Ubuntu build Firefox with Namoroka? I did this because there was a recent announcement of security fixes in FF 3.6.13 which didn't seem to be in the Ubuntu version.
Should I revert to the Ubuntu version to get around the problem? If so, what commands do I need to issues to completely remove Namoroka and replace it with Ubuntu firefox?
I would like to join SLES server to Microsoft Server 2008 Active Directory to enable domain authentication when accessing samba shares. When I run
Code:
net ads join -U administrator
I get the following error
Code:
"Failed to join domain: Improperly formed account name."
I tried the same samba configuration on another server (OpenSuse 11.2) without any problem, so I think it is somehow connected with the Samba version, but I'm not sure. Has anybody experienced this behaviour?
Code:
kinit administrator@MYDOMAIN
the package versions on SLES 10 SP2 (x86_64) are following
Code:
samba-3.0.28-0.5
samba-client-3.0.28-0.5
krb5-1.4.3-19.34
krb5-32bit-1.4.3-19.34
[code]....
Using Mozilla's Daily PPA and getting this when I try and launch any Prism program:
Code:
XML Parsing Error: undefined entity
Location: chrome://webrunner/content/webrunner.xul
[code]....
I would like to know if what this log error mean and how i can resolve this matter. I would like to verify if this is a misconfiguration or a bug on my settings
the log error is:
snmpd:error parsing ', skipping
the RHEL version used was 4 update 4 64 bit
the snmp packages installed were:
net-snmp-5.2.1-0.2
net snmp-lib - 5.1.2-11
net-snmp-lib - 5.2.1-0.2
As trying to update my system the other day I was greeted with a message I did not want.
Code:
tpsv@titantest:~$ sudo apt-get install update
Reading package lists... Error!
E: Problem parsing dependency Replaces
E: Error occurred while processing language-pack-kde-nds (NewVersion1)
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_karmic_main_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
I tried to upgrade ubuntu , downloaded everything that was needed but I am not able to install anything.
It gives an error
Code:
Do you want to continue [Y/n]? y
Extracting templates from packages: 100%
Preconfiguring packages ...
dpkg: warning: parsing file '/var/lib/dpkg/available' near line 7174 package 'python-egenix-mxdatetime':
missing description
dpkg: error: parsing file '/var/lib/dpkg/available' near line 7175:
field name `Package(' must be followed by colon
E: Sub-process /usr/bin/dpkg returned an error code (2) since then I am not able to install anything on my aptdaemon fails for anything that I try to install How to deal with it
I get this error when I try to start up firefox:
Code:
XML Parsing Error: undefined entity
Location: (null)
Line Number 30, Column 7: <menuitem id="context-copy"
------^
It's a GTK window with black text with yellow background. I've tried removing the .mozilla folder uninstalling firefox completely and deleting /usr/lib64/mozilla and /usr/lib/mozilla folders. Same error. So I tried running firefox under root, and it displays the same error plus:
Code:
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
So after long hours of frustration I created a new "test" user and firefox ran fine. It still doesn't work on my old user account and root. My system is "Linux localhost.localdomain 2.6.30.9-102.fc11.x86_64 #1 SMP Fri Dec 4 00:18:53 EST 2009 x86_64 x86_64 x86_64 GNU/Linux"
I'm really new to Linux and I badly needed some help.
I can't find the possible cause of this error log:
snmpd: error parsing '', skipping
RHEL version: RHEL4 ES Update 4 64-bit
version of snmp packages installed : net-snmp-5.2.1-0.2, net-snmp-libs-5.1.2-11, net-snmp-libs-5.2.1-0.2
I'm trying to install PPTP following this guide http://www.dotcomunderground.com/blogs/2010/04/10/poptop-pptp-centos5-installation-setup/but when I enter the command yum --enablerepo=poptop-stable install pptpd
View 2 Replies View RelatedI'm having some issues upgrading my F9 to F12 using 'preupgrade' so I'm looking for anybody who has ever been able to complete a preupgrade from F9 x86_64 to F12. The error message I receive is TypeError: Parsing primary.xml error: attributes construct error. To my knowledge this has been reported as a bug in F10 which was resolved by a yum update to version 3.2.24.
For F9 the latest yum version is 3.2.21 which has this Parsing error bug that prevents the preupgarde to continue. Interesting enough that the preupgarde lets me select Fedora 12 and progresses with all the preupgrade steps properly until the parsing error occur. How to fix this Parsing error on a F9 x86_64 system.
I need to autorise sendmail to send mail, but SeLinux blocks this action. But when I use this command:
Code:
setsebool -P httpd_can_sendmail=1
I receive an error
[code]...
I haven't been able to locate this cause. The problem developed as follows:
1. Used a downloaded .ymp file to add a community package, chose NOT to add the repo permanently from the Customize button... installation of package failed.
2. Added the repo manually in Yast Software Repositories and it went thru the process without error, BUT the repo never appeared in the list. (this is where i think the problem lies)
3. Tried to add the package using .ymp package without blocking the new repo addition... package installed successfully. Then deleted the repo using Yast Software Repositories gui.
Now starting Yast Software Management the process starts and downloads the repo.xml files from each enabled repo, then displays a error msg stating "Parsing Error". Dismiss and it loads the normal interface and seems to work properly from then on.
i traying to install php memcache module and alot of other things but evrytime i tray to use yum i got this error $Loading "fastestmirror" plugin Options Error: Error parsing '1enabled=1': invalid boolean value i have centos 5 server 64bit is there anyone now what this error and how to fix it
View 6 Replies View RelatedI have a script in which I need to wait until the required files are formed. Like the files are of the form a-1, a-2, a-3 and so on. I need to wait using sleep until files named a-1 to a-n are formed and value of n is known. How can I do this..?
View 5 Replies View RelatedI have a SUSE 10 SP 2 server that needs to get added to a Windows Active Directory domain and registered in DNS. Samba is 3.0.28-0.5. I tried to join the domain with the following command:
[Code]...
I have two machine, host1 and host2, that are running Debian 3.1 in an HA setup. AFAIK, they are exactly the same. In the course of tracking down some monitoring bugs, I discovered that on host2 "netstat -s" gives
[Code]..
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.
However when I try to install setup with yum, it tells me that setup is already installed.
I'm logged in as root. CentOS 5.5.
I am trying to install Tracon Ubuntu Karmic Koala. In order to install Trac, setup tools needs to be installed.I have followed the instructions on this page;setuptools but when I run the 'python ez_setup.py' command I get the following error message
'Traceback (most recent call last):
File "ez_setup.py", line 278, in <module>
main(sys.argv[1:])
[code]....
I've reinstalled my system and installed apache. I've installed php5. 'a2enmod php5' returns with a message telling me that php5 is already enabled.
However, this code does not parse:
Code:
</php
phpinfo() ;
/>
I get a blank page. When I view the source code for the page, I see the php code.
How do I get php to work?
I have a new setup of 8.04 with Apache2, MSQL5 and PHP5.However, I can't get the PHP to run. It is NOT the common problem of the browser offering to download the files. In my case I have some PHP in an HTML file, but the PHP is just ignored.
I have played around with my httpd.conf and also php5.conf files, but I couldn't make any difference.
My httpd.conf sets the document root to /var/www and if I put a php file in here with command phpinfo(), then it seems to dispay correctly. My HTML files are /var/www/app/index.html
I'm breaking my head on this.I want to create a development environment. This means that I want to be able to create/change files myself, but php should be able to do the same. I installed a lamp-stack using tasksel. Afterwards I installed phpmyadmin. So far so good. Going to http://localhost shows "it works".
Then I created a folder /home/hwc/www and created a new apache site called hwc, disabled default and enabled hwc that points to /home/hwc/www and has the directive AllowOveride All set. But when I go to http://localhost know I get a 403 Permission denied error. I've tried several trings like changing ownership of /home/hwc/www to www-data:www-data, to hwc:www-data, to hwc:hwc, but all to no avail. Even adding www-data to group hwc and hwc to group ww-data did not help. According to other posts at least on of these solutions should have worked, but it did not. I could probably fix it by letting apache run as hwc, but that doesn't seem right.
I had setup an encrypted home directory on my computer, following all the instructions. However, after one reboot, ecryptfs told me "ERROR: Encrypted directory not setup properly." So I rebooted into an Ubuntu Live CD and ran ecryptfs-recover-private. It found my encrypted dir and asked for my login passphrase. I entered it and it told me, "ERROR: The key required to access this private data is not available." Is there any brute force way to recover the key?
View 4 Replies View Relatedwhy Apache is not parsing php code inside html files in LAMP? Whereas the same is working fine in WAMP..
View 6 Replies View RelatedWe have a system called Skynet, which is basically a bunch of monitoring tools, including Nagios. What I want to do is output the status of 'critical' processes in conky. The conky part I'll worry about later (how hard can that be?), but I'm looking for some feedback on how I'm parsing the initial data. I figure that the simplest way to get the information is to query the cgi, then take what I need from the results...
Code:
wget -O - "http://user:pass@skynet/nagios/cgi-bin/status.cgi?status.cgi?host=all&servicestatustypes=16&hoststatustypes=3"| grep -i "<TD ALIGN=LEFT valign=center CLASS='statusBGCRITICAL'><A HREF='extinfo.cgi?type=2&host="
[Code]...
All I basically want is the server name and the process name, the above example giving server0/server1 and 'update status' as the service. How would you go about extracting merely these two pieces of information, bearing in mind that the server name and process are variable?
I'm currently running Koala on a Dell Latitude D630. I've been with Ubuntu since Hardy, so I have some experience, but this is beyond me. Basically, I was at school, closed my laptop, and bicycled home. When I opened it up at home, I saw a blank screen. When I tried to reboot, I was told that the disk couldn't be mounted. When I boot a LiveCD, I can see my two disk partitions (/ and /home) as "16GB Filesystem" and "95GB Filesystem". The 16GB system can't be mounted, and I'm pretty sure is fragged. I tried reinstalling Ubuntu, figuring that would fix it, but no luck- it starts fine, but it gets about halfway through and then says it can't install the files.
The machine is still under a service contract with Dell, so swapping out the HD itself isn't such a big deal. It would be nice to get my data, though. I can successfully mount the 95GB (/home) system. I then see two folders "dan/" and "lost+found/". I can't enter the "dan" folder because I don't have permission. Opening a terminal and navigating to /media/95GB Filestystem/dan/ works if I "sudo su root" first, but not as "ubuntu" In the dan/ folder, all I see is "Access-your-private-data.desktop" (because my /home directory is encrypted) and "README.txt". The README says to run the command "encryptfs-mount-private".
When I do that, however, I just get the message ERROR: Encrypted private directory is not setup properly I tried putting my decryption password immediately after the decrypt command, a la: encryptfs-mount-private mypasswordgoeshere but with no change in results. The one ray of sunshine in all this is that I backup my /home directory to an external every week or two. So the actual data loss is not catastrophic. But it *has* been a busy week, so I would really like to recoup that data, since it includes little things like the first chapter of my dissertation, and the job negotiation emails in my .evolution folder.
I would like to install pymedia on my ubuntu 9.10 karmic distribution, but I am having a bit of a hard time doing that.I managed to install all the libraries (lame, libogg, libvorbis etc.) but when trying to run 'python setup.py build' I get an error (Shown at the end).I found on the interwebs that it may have to do with the version of gcc c++ compiler running (currently gcc-4.4) and that it only works with gcc-3.x. Therefore I downloaded gcc-3.4 (from the old jaunty archive), and with this one still no joy.NebelhomP.S. I am not a complete newcomer to linux and python but I am not an expert so it may happen that I ask questions with a very obvious answer.
Code:
nebelhom@nebelhom-desktop:~/pymedia-1.3.7.3$ python setup.py build
Using UNIX configuration...
[code].....
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Code:
You don't have permission to access /po/ on this server.
So I go to the logfile; which says this:
Code:
[Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I just installed Ubuntu 10.04 64 bit on my mac as a seperate OS, but I can't get my Internet working. It's wireless and Ubuntu isn't seeing any of the wireless networks in the area. I have installed ndiswrapper and tried installing a driver for my network but it didn't work.t=616801 but when typed in this code: "ndiswrapper -i bcmwl5.inf && modprobe ndiswrapper" I got the "No such file or directory at usr sbin ndiswrapper line 219" error
View 2 Replies View Related