I had to reinstall Windows, which has obviously overwritten my lovely Ubuntu Natty
I would like restore grub2, however failling to do so
I'm running:
Code:
sudo mount /dev/sda1 /mnt/boot
sudo cryptsetup luksOpen /dev/sda5 crypt1
Enter LUKS passphrase:
key slot 0 unlocked.
[Code]....
I accidentally deleted my root ext4 partition, which I had encrypted. I am unable to log into any os since I am blocked by a Error 17. Is it possible to retrieve an encrypted ext4 partition, does it even matter that it was encrypted.
View 6 Replies View RelatedI recently installed windows 7 and of course it got rid of grub2 for me. I tried restoring it but when I try to mount the ubuntu partition (sda3, extended filesystem) I get the error "mount: you must specify the filesystem type"
View 9 Replies View RelatedI get the error - 'You must specify the filesystem type'.I used the syntax on the GRUB2 page:mount /dev/sdb3 /mnt but it returns the above error.Is there additional parameters to the code???
View 1 Replies View RelatedI've installed a Squeeze-based distro - Crunchbang - with an encrypted root partition (no LVM), and it won't boot.
Here's what I get: Loading initial ramdisk. Loading, Gave up waiting for root device ALERT! /dev/mapper/hda5_crypt does not exist. Dropping to a shell!
Here's my partition table:
hda1 - Windows (Truecrypted)
hda2 - GRUB2
hda5 - /
hda6 - unused swap
[Code]...
What should I look for? Where do I go from the initramfs shell? Do I chroot? What then? This might be a Crunchbang issue (although others blame LVM which I didn't use, and it's the original Debian installer after all), but there's gotta be a reason it doesn't boot
Does grub2 support booting off of encrypted partitions? I'd like to have an encrypted linux system, but only have space for one partition or logical group in my mbr. Or can I include that one /boot partition in the lvm group.
View 8 Replies View RelatedUnitl yesterday I have a pc with ubuntu server and desktop. Server I installed first. Desktop later. But I want to remove that server and use the space for other stuff..I mess with Disk Utilities and gParted and remove the ubuntu server partition. But now my grub2 stops working. How can I restore grub2 on the desktop partition and use the unallocated space for desktop without loosing any of my stuff? I have a scanner, webserver running, samba and other apps up and running on desktop.I can boot via live cd, and I get this on sudo fdisk -l:sudo fdisk -l
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
My friend recently re-installed WinXP on his laptop, but I'm having trouble getting Grub2 working. I followed a guide online, but when I booted it back up again, I got a Grub prompt instead of a boot menu.
View 4 Replies View RelatedI installed Ubuntu on my system after first installing Kubuntu. Now when I boot into Kubuntu I have this garish mashup of Ubuntu and Kubuntu splash screens. They are mixed up in both the grub2 boot and the Kubuntu login.I tried running sudo update-grub within Kubuntu but that didn't change the screens. How do I restore the default (elegant) Kubuntu splash screens?
View 1 Replies View RelatedThis is my specific solution to my specific problem. After updating to Squeeze from my prior Lenny distro (amd64 with whole disk encrytion using LVM2, dm-crypt, LUKS) everything went well - at first. I was duped like so many, thinking that all was well and I could remove the legacy-grub (aka: Grub1) and just use grub-pc (aka: Grub2). As soon as I removed the legacy-grub and rebooted my laptop, I was confronted with:
GRUB Loading stage1.5 GRUB loading, please wait..Error 15 At this point I wasn't sure if it was a Grub problem or a deeper encryption problem - especially after reading that some people had missing packages in Squeeze (lvm2, dm-setup, initramfs-tools, etc.)
Okay, the solution for me.
1. download and burn to disk: debian-live-6.0.0-amd64-rescue.iso[URL]..
2. scroll to and press enter/return on: text rescue
3. choose a root directory - for example: /dev/blah/root (I wrote down the list of possible /dev/.... for reference - this helped me remember where and what I had partitioned in Lenny)
4. choose: Execute a shell in /dev/blah/root
5. once in the shell, I discovered I needed to mount a few of those partitions that I had written down in order to get access to grub-probe, update-grub, grub-install, etc. You may not have to if your partitions are minimal. I you need to use other partitions, type (for example):
[Code]...
Last week, something I did blew away my Windows boot partition and, until Dell shipped me the installation disk (why didn't they send it with the machine? That's another issue.) I was forced to work from the Ubuntu live disk. After using
Code:
bootrec.exe /fixboot
bootrec.exe /fixmbr
[code]....
so i've just installed Burg loader in a PC which dual-booted Windows 7 and Ubuntu 11.04 with no problem using grub2 in the past. But after i installed burg it just boots up straight into the Windows OS and Ubuntu is nowhere to be found. Is there a way to restore grub2 preferably without having to lose any files?
View 2 Replies View RelatedHow can I restore or reinstall GRUB2 from squeeze installation? I tried various suggestions from various online articles (most of them for ubuntu), but I couldn't find a solution. Is there any solution, specifically for Debian? GRUB reinstallation from install cd, didn't worked as well. Since I couldn't boot at all, I restored GRUB1 and I'm posting from Lenny, but I can't access Squeeze this way (probably because I have squeeze's partition, ext4 formatted).
View 5 Replies View RelatedI had an Ubuntu desktop 9.04. While I wanted to format my second hard drive with gparted, I have selected my system HD () with all my datas (/home, ...).In fact, my error is I have selected to rebuild my partition table and now I have lost all partitions . I would like to know how to restore my datas.
View 4 Replies View RelatedI was dicking around today and I deleted an LVM partition, is there anyway I can restore the partition and add it back to my volume group or is it game over?
View 5 Replies View RelatedI read an article earlier that suggested the swap partition is encrypted by default if you select an encrypted /home folder during installation, is that true (for Lucid)? I am suspecting it isn't because my hibernation works, which I believe shouldn't be the case?
View 3 Replies View Relatedhad a lvm (non luks i suspect) home partition on my 11.04 install. I've since install opensue on the same laptop hoping that if i don't leave that partition alone during opensuse installation i would be able to mount and enter my key to access the data within...stupid me.... i formated my /boot and / partition, not my /home partition of 450gb. I'm now back on ubuntu 11.04 trying to get access to my data. i'v found the command "encryptfs-recover-private" but i only works on mounted partitons, i can't mount my encrypted partition because the system does not recongnize it. I've have to format it to mount it.
fdisk
(bold is my encrypted partition)
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 96256 83 Linux
Partition 1 does not end on cylinder boundary.
[Code].....
Times like this Ubuntu makes me want to pull my hair out. When I enter my pass on the login screen, it brings up a "Could not update ICEauthority file" error and then goes to a black screen. I've tried to fix this problem for the past 2-3 hours (searching google, these forums, etc) and at this point, I just want the data off my drive so I can restart with a fresh install of Ubuntu. I used the "gsku nautilus" command to mount the disk from a Ubuntu Drive boot, but it's not letting me have access to the encrypted drive. Does anyone know of a work around for this?
View 1 Replies View RelatedI have a dual boot WinXP / Kubuntu system. Recently, I tried to upgrade from 9.10 to 10.04. I have my Kubuntu partition set up with separate partitions for / , /home , and swap. Naturally, I wanted to wipe the slate clean, so I formatted / and left /home alone before doing the install. However, my /home partition was encrypted with the standard crypto that you get when you install. I just deleted the way in by wiping my / partition. Now all of my files are on my drive but encrypted. I do have the unencrypted passphrase given to me when the hard drive was first encrypted, so I am sure there is some way to get my files, but I am unsure how to apply it.
View 9 Replies View RelatedI found this website [URL].., and am able to go all the way up to "ecryptfs-mount-private" command, but the response I get after entering my login passphrase is "mount: Operation not permitted". I am not sure why though I am guessing I have a permission issue.
View 1 Replies View RelatedCan't start Ubuntu, stops after first password. I can access files on my encrypted partitions with LiveCD but I wonder if I can install Ubuntu and still have access to the encrypted drives as I can with LiveCD?
View 1 Replies View RelatedWhile setting up my laptop on a new hard drive (a bad mobo caused writes which pretty much rendered teh old hdd unusable) I was asked if I wanted to encrypt my home partition.
I've been wanting this for several years - even going as far as trying to get a copy of CheckPoint. That's waht my organization uses on all Wintendo laptops and is required.
In any case, I said "yes" and am happily using my laptop with an encrypted home partition. I'm assuming based on this - [URL] - that it is using EncryptFS as the scheme.
if I were to misplace my laptop, how easy would it be for a forensics team to retrieve my data. Let's assume I have a fairly strong passphrase, such as BisZumBitterenEnd3. [URL]
I had some major problems after the recent Ubuntu upgrade and had to boot from a live cd. I have a separate /home partition, but it was encrypted using the default install encryption in the 9.10 install cd. How can I get to my files so I can back them up?
I have tried this but it did not work: http://ubuntuforums.org/showthread.php?t=1337693
I have an Acer Aspire One, Model ZG5 (also known as the 110 with 8GB SSD) which originally came with Linpus Lite installed on it.
I previously had 9.10 installed which was great, but I've done a fresh install of UNR 10.04 since I had a full /home partition and wanted to set up with more space.
This time, I opted for a larger /home drive (~4GB) and also to have it encrypted, which is a good idea for netbooks given their portability (and I have no idea why I didn't do it before!). Since I had very little space on my 8GB drive (if I wanted a larger /home) then I installed /home onto a separate partition, which is located on a 16GB SD card which lives in my machine permanently.
Installation was a breeze, and encryption seems to work fine. I have verified it and it seems to be working. However, I've now hit two related problems - one of which is to do with Thunderbird, and one which is an issue with the encrypted /home drive.
Firstly, I have a large gmail account which I like to replicate offline in Thunderbird (am using v 3.0.4). My online gmail tells me that I'm using 1.4GB of data space online. Using the old T'bird (v2.whatever) my offline T'bird storage was approximately the same size. This is not now true of my current offline storage file size, which is showing at 3.2GB for the same data. I started with a clean slate, just installing T'bird, setting up my account and then leaving it to download all data from Google.
Anyone know why this offline size is so much bigger than the online storage size or even the previous offline storage size?
Secondly, the encrypted /home drive. Given that I needed I put this on a separate card and partition, I had hoped to escape any issues with not having enough space. However, my system is now telling me that /home is out of space...
Specifically, I can see that I have used 3.6 of my 3.8GB storage for /home. This is due to the large size of my offline storage folder.
As I see it, I need to do one of two things (possibly both) - reduce the size of my offline e-mail storage, and increase the size of my /home partition.
Reducing the offline storage will be about finding out why it's so big in the first place.
However, if I wanted to increase the size of my encrypted /home file how would I do this? I have used gparted to make additional space after it - so I could increase the size if it's possible, but I am a little concerned.
If I just increase the size of the partition, would this work? Are there issues with the fact that it's an encrypted partition? What should I be aware of if I wanted to increase an already in-use partition, and how should I best go about this?
Do I need to do it from a live USB image?
I'm wiping out / on an Ubuntu box but want to keep everything in /home/, which is mounted on a different partition. Using Code: ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase I have unwrapped the passphrase, resulting in a ~25 character alphanumeric string. Is it possible for me to install from a disk and give the installer the (current) passphrase so that it will automatically mount my home directory?
View 3 Replies View RelatedI have to operating systems installed, Ubuntu 10.10 and Windows 7, working perfectly. I also have a partition, currently empty, to be shared between both OS, but I would like that partition to be encrypted.
View 2 Replies View RelatedI used Windows XP's encryption to encrypt some folders on an NTFS Hard Drive.Upon mounting this drive in ubuntu, I can see all folders, and all file names, but I cannot open the contents of the encrypted files, getting "Permission Denied" despite all permissions being -rwxrwxrwx.Is there a way to open these from linux? I know the Windows XP login / encryption password.
View 3 Replies View RelatedI recently suffered a hard disk failure, meaning I had to replace the faulty device. After attempting to mount the old faulty hard drive using and external caddy, I got the following message... Unable to mount 144 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
I'd like to attempt to recover what I can from my /home directory but unfortunately I use encryption (although I do actually know my pass phrase). What procedures and software can I use to try and recover data from this drive?
I have been using fedora 12 for last 6 months, recently I bought an external USB hard drive of 320 GB capacity. I made 2 partitions using the Disk Utility in Fedora. I encrypted the first partition as it was supposed to hold a lot of sensitive data, and yes it did have. Now I had to change my OS to AV linux for some audio-video editing work which wasnt being done properly on fedora due to some issue beyond my knowledge. now the problem is my encrypted partition is not accessible in my new installation. I see an empty space on my /dev/sda1. although no change to partition data has been done and the data on the second partition /dev/sda2 is easily accessible. when putting the drive on automount, is does not ask me for the password and neither does it show me the data. I have tried fdisk and sme other utilities but have failed to get my drive unencrypted.
View 7 Replies View RelatedI used Ubuntu for years now, but since the latest decisions got public I deceided to try something new: Fedora. I installed the system as a dualboot,Ubuntu and my old data. Because Fedora got installed inbetween of two partitions,ad to do the partitioning manually. I just made one partition /dev/sda4. During the installation process I got asked about the password for my /dev/sda1 partition. Of course, I entered it. So far so good.Now, everytime when I boot, the boot process stops and asks me for the password of the /dev/sda1 partition. However, the boot process does not go on, unless i press STRG+C.After the log in, I can also not access my data, by entering the password (GUI).The only way I can acces the data on that partition is:
Code:
su -
cryptsetup luksOpen /dev/DEVICENAME luks-fedora
[code]...