drive is as follows:
NTFS Partition (Storage)
NTFS Partition (Win7)
Ubuntu
I am trying to put GRUB2 on the Ubuntu partition, but it will only let me pick the first two. If I pick the Ubuntu partition in the last dialog bix, it is listed as /dev/sda-1 I also have no idea why is says "-1", because the first two are fine at 1 and 2 respectively.
How can i install Ubuntu 10.04 over my older version of Xbuntu 9.10? I already have the 32 bit ISO downloaded. I am on step 5 of 8, Select Partition. But it aint letting me select the older ubuntu partition.
View 9 Replies View Relatedi initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
I want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
View 3 Replies View RelatedI have used grub2 to be able to boot multiple iso files on a flash drive as per this thread:
http://ubuntuforums.org/showthread.php?t=1484582
Is there any way to add a persistent installation of 10.04 to this flash drive, similar to what the startup disc creator application can do? I'd like to be able to have the clean installation and the persistent installation plus the other tools that I have on the flash drive. It's an 8 gb drive so there is ample room.
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
I have installed 9.10 to an existing Vista machine. Here is the fdisk
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 9 72261 de Dell Utility
/dev/sda2 10 1315 10485760 7 HPFS/NTFS
/dev/sda3 * 1315 14031 102145543+ 7 HPFS/NTFS
[Code].....
i had ubuntu and slackware installed together for a while, i just needed xp to do some native language work so i installed it on my extra partition but then i messed up the grub menu, however i reinstalled it from live cd.. but now the problem is i dont know how to add a xp in that.
i'll give you my fdisk -ls output :
Quote:
/dev/sda1 1 12803 102840066 83 Linux
/dev/sda2 12804 14267 11759580 83 Linux
/dev/sda3 14268 15035 6168960 82 Linux swap / Solaris
/dev/sda4 * 15036 19457 35519715 7 HPFS/NTFS
[Code]....
I get the error - 'You must specify the filesystem type'.I used the syntax on the GRUB2 page:mount /dev/sdb3 /mnt but it returns the above error.Is there additional parameters to the code???
View 1 Replies View Relatedboot up in to chameleon, lists only Mac OS X as a boot option. Reboot, load Ubuntu 10.4 install cd, get to a terminal, mount /dev/sda3 /mnt grub-install --force --root-directory=/mnt/ /dev/sda3
reboot, let chameleon come up, it sees both Mac OS X & Ubuntu partitions and I can boot to either or happily, now here is the problem... If I select linux and boot in to linux from chameleon, i am brought to the grub menu, where i can select the first choice which is normal ubuntu 10.4 and every thing is great... until I reboot and my linux partition no longer shows up in chameleon, as if tthe act of booting in to grub is changing something / deleting itself from the partition? and I have to do the whole thing over again. SO, not having to even go in to OS X, I'm not sure thats really the concerns more as I'm doing something wrong with grub.
For a while now, I have multibooted my Vista installation with Ubuntu. However, up until now I have been happy with Ubuntu being in charge of my boot options. I am wanting to change my bootloader so that when my machine boots, and no choices are made at the boot menu, Vista automatically starts after a set amount of time instead of Ubuntu.
I know the boys over at APC have a guide on how to do this, but it involves copying information from the menu.lst file and using EasyBCD - I was wondering if these steps will still work now that I am running Karmic Koala, which I understand uses a different method of changing GRUB entries (manipulating the menu.lst file is no longer part of this process and is no longer recommended)
If someone could tell me how to put Vista in charge of my boot options so that it will boot automatically instead of Linux, that would be greatness.
I have VirtualBox up and running, and the installation is working, but for some bizarre reason...the Virtual Drive isn't letting me type into to complete the Installation of Ubuntu 10.10. I am currently using Windows 7 Home Premium 64-bit.
View 1 Replies View Relateddont get me wrong i am happy with my Ubuntu until i want to use the usb maker thing.. i got netbook remix and now i want to install it.. i use one of my usb drives.. BUT.. ubuntu usbmaker dont let me formate it.. i have used gparted, yes with ntfstools and tried formate it in every possible way with and without flags and **** and usbmaker dont seem to accept it however.. the usbmaker cant do ****.. it tells me it cant use the stick** and then gives me everything from 1 - 2 partitions.. i have backtracked this problem as far as i can it i dont get it..unetbootin makes it work great! but why shold i have to go so far as unetbootin to get things done? is usbmaker the most unuseless pice of software or what.. ?
View 6 Replies View RelatedI've been using Ubuntu for 6 years now as my major OS, dual booting with Windows. (just in case...)
I am now ready to completely abandon Windows as all the music editing and video creation tools I could not live without are available in Ubuntu and working great!
QUESTION: If I format the C: Windows partition, will I still have the GRUB to choose Ubuntu from? (I'd like to get rid of GRUB altogether to speed up my boot time)
I have a portable 320 GB USB HP SimpleSave external hard drive, and I want to install Ubuntu 10.04 Desktop to use on both of my computers when Windows is letting me down. The last time I tried to install 10.04 a week after it came out, I was presented with tons of errors, even though I did it the same exact way I did it with 9.10 that worked. I would like some help on the subject of installing them on usb hard drives. Most the time, it's GRUB being antsy about where it's installed. IF I don't change where to install GRUB, it won't let me boot on any other computer, or USB port.
View 9 Replies View RelatedI'd been using 10.04 for a while and then one day the computer wouldn't boot. It just loaded up to a low res purple screen with the loading dots on it and froze. I managed to get all my files back and everything and re-install and it was working fine until I enabled the graphics card and then the same problem occurred. I've isolated the problem to the graphics card. It's never given me issues before and I've been running Ubuntu for about 2 1/2 years now so I was kind of surprised.
It's an NVIDEA card by the way. Any suggestions as to what I should do? I need hardware support for graphics because I do some work in 2D and 3D and as such need to be able to do that stuff on my PC. I don't want to have to keep reinstalling to check if the graphics card is working again yet but it's the only thing I can think of =(
I was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies View RelatedI'm trying to set-up a dual-boot (Windows XP and Ubuntu 10.04), but whenever I start the installation from a Live CD and get to the partition section it is showing that my hard-drive is has no operating system, when it in fact does. Has anyone else encountered this issue, when trying to set-up dual-booting on their system? And, if you have had this issue, what did you do to resolve it? I find it very strange, since I've never had a problem like this with any of the older releases.
View 2 Replies View RelatedI recently got new hard drives for more space and copied all my old drives onto this one (everything mirrored, no problems)The thing is, when I first setup my Ubuntu, I only allotted like 20GB because of space.Now that I have new hard drives, I wanted to give it more space, roughly double it to 50gb.The problem is, I am unable to resize it.I have booted into the Ubuntu Live CD, and started Gparted. I see all my stuff there, including the unallocated space next to my ubuntu partition (I left it so i could fill it when I expanded the partition)
The problem is, I am unable to make it larger. I right click, click on resize/move, but when I do, it just shows that I'm at my maximum size for that partition, I can only shrink it.so my question is, how in the world can I extend that partition into the unallocated space?I've tried formatting the unallocated space to ext3 to try and merge it, no success.I tried moving my ubuntu partition all the way to the right (end of the disk) so maybe I could extend it to the left, nothing
I have a PC that has 10.04 installed and no other operating system. The 1 TB hard disk has two partitions:
* 940 GB NTFS for data storage
* 50GB ext4 (which has 10 GB extended and 10 GB sawp)
The system has become sluggish and slow and browsers and so on often "hang" for a few seconds prior to executing. There is an epiphany dependency problem that I cannot solve.
My questions are:
1. Is it possible to do a clean install on the 50GB partition from a live CD?
2. Is it better to do this than upgrade to 10.10 and thence to 11.04? [When I ungraded like this in the past, I had problems, so I would prefer a clean install].
3. If it is possible to do a clean install on the 50GB partition, should I reformat the partition and if so, can I do that from the live CD?
I'm trying to install debian on a encrypted partition with LUKS and LVM. I've found a good tutorial for ubuntu (here but it's in french). The idea is to create a sda1 partition for /boot and create a sda2 partition which is encrypted with luks ("cryptsetup -c aes-xts-plain -s 512 luksFormat /dev/sda2") and on this encrypted partition, I use LVM to divide it in several different partitions (root, swap, home,...).
I can do it all with the debian live cd but once it's done I need to install debian. The problem is that with the basic install cd (I use netinstall), I cannot decrypt the partition for the installation (or if I can how ?)And with the live cd, I didn't find any option to do that.
Want to repartition/resize existing 1/2 full 60MB sda2 currently containing NTFS. The "Allocate drive space" does not seem to have a resize option (the 10.04 docs claim there was a resize option here). When I run 10.10 gparted in live mode gparted crashes for unknown reason before it even finishes scanning the disk. Am I missing something here? (Never tried to resize an ntfs part. with Ubuntu.) The laptop I am installing this on currently has XP that crashes a lot for unknown reasons.
View 9 Replies View RelatedI want to reinstall windows to its partition on my computer, but I want to be able to restore grub2 afterwards. I use a lot of custom scripts in the /etc/grub.d/ directory on my ubuntu partition, so how can I reinstall grub to the MBR using those specific scripts? Just running "sudo install-grub" or "sudo update-grub" doesn't work for me (I don't know the exact problems, but I can't reproduce it right now). If there's a way to install just the defaults (without overriding my custom scripts!) maybe I can just do that, but I'd really like to put the live cd, run a few commands, and install those custom scripts to the mbr and be on my way.
View 1 Replies View RelatedI was extraction some file through command line then I encounter on notification from winrar. This file exist what u want to do
replace
never
quite
I don't want that winrar will prompt me to choose action. Everytime whenever this situation occur it will overwrite / skip that file
Syntax I am using for unrar
rar e -pmypassword filename
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies View RelatedThis is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup:
220 GB - Vista System Partition (NTFS)
14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista:
170 GB - System
50 GB - Unallocated
14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left:
170 GB - System
14 GB - Recovery
50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is:
170 GB - System (NTFS) - Primary sda1
14 GB - Recovery (NTFS) - Primary sda2
200 MB - /boot (ext3) - Primary sda3
sda4 - Extended Partition
45.8 GB - / (ext4) - sda5
4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.
Well Fedora 14 sees my Emu soundcard right out of the gate with the live cd! I have windows 7 installed right now. I would like to install Fedora 14 from the live cd to have a duel boot setup. What I am trying to do is just give Fedora 60GB of the drive and keep the rest for Winows. How can I go about this with the live cd. I am sure it's been covered to death but I couldn't really find it.
View 14 Replies View RelatedCan someone tell me how to do this? I just formatted a slaved drive for EXT4 and now I'd like to write grub over the MBR. Cannot really find much on Google. tried: grub-install /dev/sda1 and of course didn't work....
View 5 Replies View RelatedIs there a way to install grub2 from a linux live cd when linux isn't installed on any of the partitions? I'm setting up a multiboot partition for someone and I don't want to install linux anywhere on the computer since hard drive space is running short.
View 2 Replies View Related
