Ubuntu :: Getting A Message In Russian Under The Heading Of Subscription Request?
Mar 6, 2010Why am I getting a message in Russian under the heading of "subscription request" where the messages about wireless internet pop up?
View 4 RepliesWhy am I getting a message in Russian under the heading of "subscription request" where the messages about wireless internet pop up?
View 4 RepliesEvery single time I start Empathy, it says "Subscription requested by NAME" (where name is someone's username). I don't know this person, I don't want to say yes. However, every single time I click "No" and it won't remember that I've rejected this subscription! How can I get it to stop prompting me? I want to say "No, and never show me this darn request again, dangit!"
View 1 Replies View RelatedEmpathy prompts to approve a subscription request.
I select "No" to deny the request.
If I reboot or logoff of machine upon re-boot the same subscription requests appear.
It is re-producible and happens every time. If I don't reboot or logoff the subscription request will no longer appear.
Anyone know what this signifies in the Apache logs files:
Code:
[Tue May 04 20:56:06 2010] [error] [client *******] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 20:56:06 2010] [error] [client *********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
[Tue May 04 21:05:18 2010] [error] [client ********] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:)
I am sending message from linux to windows system as follows echo "test"|smbclient -M <IP Add>But I am getting "session request failed" message . How can I solve it? <Ip Add> in network and reachable.
View 1 Replies View RelatedI've noticed that since that time I have lost the subject heading at the top of the page and also the arrows that allow me to visit a previous screen or a subsequent screen. Any suggestions for how I can retrieve the menu box at the top of the screen and the directional arrows?
View 2 Replies View RelatedI need to put headings on top of the output of this awk script :
#!/bin/sh
[Code].....
How to see the command output headings
For example:
on executing the 'w' command u will get the following output:
$ w
USER TTY FROM LOGIN IDLE JCPU PCPU WHAT<<<column headings
navdeep tty1 - 23:55 31:10 5:00 0.00s /bin/bash /usr/
navdeep pts/0 :0.0 00:00 0.00s 0.44s 0.00s w
Here we know what each column stand for but this not the case with other commands. How to do this (column heading for commands).
how to redirect all client http request to https request in squid
View 1 Replies View RelatedWhen I set up Ubuntu 9.10 Server I didn't enabled Russian Letters, and now I need them. The only language is English. So when I type in Russian there are some symbols. So how can I install Russain Letters on the running server.
View 1 Replies View RelatedDoes anybody know where the "pay-per-year-instead-of-per-month-botton" is located. I can't find it
View 2 Replies View RelatedI recently installed Red hat enterprise 5 on a vmware esx server 4 and i didnt realize that for updates and patches you have to have a subscription to the red hat network. is there a free server linux OS that does not require this and is there a way to update on RHEL 5 without a subscription.
View 3 Replies View RelatedI want to subscribe to newsgroups pertaining to Linux in Thunderbird. To configure the subscription Thunderbird asks me to enter the server name for the newsgroups, but I don't know any server name serving newsgroups for Linux.
View 1 Replies View RelatedI'm trying to change mapping for a couple of keys in Russian phonetic layout.
View 7 Replies View RelatedI am from Lithuania, but when I start "Online Help" application it is in Russian language. I believe this is a mistake, because English version of this page would be a lot more usefull.
View 1 Replies View RelatedFirst little history here: First tried Suse 7 years ago, or something like that. Not used actually, was collecting dust on second partition. Then after view years switched Ubuntu 5 or 6 or something. Used it for view years on my desctop. Linux only. No dual boot nothing. Then bought a mac mini. Played with OSX for view years. While following lessons of Fedora and CentOS. Then Win7 came out. Used it for view years. To be kind of up to date.
Now:
a view month ago i installed Russian Fedora Remix on a mac. I a sence of completely switching back to linux. I dont want to use OSX for example simply because you get used to what u use. So i tough ill run lets say Fedora on my desktop at home and workstation at work. And surely CentOS on server('s). For glpi for example, or wahtever else. Fog maybe.
The trouble: Ive installed Russian Fedora Remix and then installed EasyLife Project on it. Everything runned fine for view month. Then view weeks ago it stated to refuse to update because of package conflict. On Russian Fedora Remix forum ive got an advise to remove the conflicting package. (Alsa). When i removed it, it removed also one gig dependencies. Now gnome and kde do not log in. Only openbox and enlightenment work. Browsers do not work. And i doubd something else works at all.
THe question: I wondered what are the proc and cons of the RPMFusion enabled by EasiLife project and Russian Fedora Remix repos. Because RFR repos already contain non free codecs and so on. My first tough was that maybe it would be more interesting to use Russian repos because maybe they would be littlebit later in updates. So if an update brakes something. It can be fixed before it was added there. Im Russian by the way, thats why im interested in this version. Althou what is more of concern to me is that RFR contains all the codecs out of the box. For me on the PC its RFR or SuperOS that are interesting. The rest are details. But then, my second though was that maybe RFR might also be kind of purer then EasyLife project. I mean i remember the days when people on Ubuntu forums were against Automatix. Offcourse i expected EasiLife project to be more cosher maybe. Maybe because its fedora finaly not ubuntu. I always tought that fedora forums are kind of more professional but, what is not so good, less friendly compared to ubuntu. Thats was my impression. And also ive been already suggested on the fedora irc to not use easylife project. I actually installed it on RFR mainly because of a habit of installing it on fedora. And because of a theme. But that is not a concern anymore. Cuz ill costumize it anyway.
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies View RelatedUsing IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI was trying to use Message Queues for sending message from aninserted kernel module to user space. The function sys_msgsnd failedgiving the obvious error -EFAULT.However, I was able to send the message from kernel to user space when I had made the same driver part of kernel (and not inserting it).How is that possible?I am using linux.2.6.19.x (arch=ppc)I now use Netlink socket to communicate from kernel to user, but the aboveproblem seemed strange to me.
View 2 Replies View Relatedwhen I boot my PC I get two password request, one is for it to be able to log in the wifi catcher and the other is just a pain in the ***, how can I set it to get just one again,
View 1 Replies View RelatedI have this annoying problem, when I boot my PC I get two password request, one is for it to be able to log in the wifi catcher and the other is just a pain in the ***, how can I set it to get just one again, or what could have happened? because I before I just got one.
View 2 Replies View RelatedWe are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
I switched to Kubuntu with the upgrade to Lucid. After a couple updates, I started getting a "Gnome looking" unlock screen on my desktop at start-up. I get the regular KDE keyring password request and a second that looks like the Gnome keyring. I don't know how this happened. I checked in Synaptic and found the gnome-keyring was installed. Can I uninstall this or will that cause problems?
View 5 Replies View RelatedI am using Ubuntu 10.04 on my Macbook Pro 3,1. I would like it if there was an option in Preferences > Keyboard > Layouts > Options that if selected would swap the Ctrl and Command keys around so that those keys would behave like they do in Mac OS. On the macbook pro the keys go fn, ctrl, alt, command, space etc. and it's really much easier to use command (with your thumb) + z/x/c/v/b/w/q/r/a etc. than it is to use ctrl (with your little finger). If your keys are in the same order as mine, try it. I'm sure you'll find it downright awkward using your little finger for ctrl. You might think that I'm just not used to it but that's not it.
I was used to using ctrl for years and when I started using my macbook pro I was astounded by how much easier it is to use command. In Ubuntu 9.04 and 9.10 on my mac I was able to remap the keys with xmodmap but while with 10.04 the keys are remapped according to xev it has no effect on their behaviour. I can't imagine adding one more option to the list would be that hard. I have learned how to code in the past but it has been years and years and wouldn't have the first clue where to start in Linux. How I can find and contact the developers of this part of GNOME so that I can make the request?
I try use Squid as my proxy server. When I set my firefox to use my proxy server (squid), all is ok, but when I set firefox on another pc (from internet, not local network), all request returned time out turn off my router and connect PC to internet (without router), but still don't work.In iptables is all ok, I think. Where is problem? I think, It isn't problem with squid (because squid don't show error page), but I don't know how fix it
iptables:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Edit: SSH from remote pc work fine.
I know it's safer not to block the request for a password that unblocks the keyring but I'm desperate.
The more I use ubuntu more times I'm requested to provide the keyring password. Now, this time, i've typed 7 times!
is there a way to limit this nighmare. Every time I bootup i got tired.
Every time I connect to my UBUNTU virtual machine, UBUNTU wants me to install the product.Why doesn't it remember that it has been installed each time I connect to it? My PC is Windows 7 and I am using VirtualBox to connect to the LINUX instance.
View 1 Replies View RelatedNew User to Ubuntu by the way. I have two computers, both running Ubuntu 10.4 fully updated and I am trying to bring files from one computer to the other with Filezilla ftp client. I was able to do this before, but I ended up having to reformat because of a driver screwup that I couldn't figure out how to fix. Now I am at a loss on how I managed to allow the computer with the files to connect to the one receiving the files. Computer A is the one that has the files that I am trying to send to computer B. Every time I try to send them over I get a "connection was refused" error.
Typed in the right IP, username, password, and port but still wont connect. Are there any things I have to do in terminal to allow access? I installed firestarter and just disabled it so ports should be open. By the way, I am using FTP because it was much simpler then trying to dink around with Samba and this is a pretty safe network.
- Enabled firewall, forwarded the ports in the events list then we get "request timed out"
- Reformatted> Fresh install >Updated