Every single time I start Empathy, it says "Subscription requested by NAME" (where name is someone's username). I don't know this person, I don't want to say yes. However, every single time I click "No" and it won't remember that I've rejected this subscription! How can I get it to stop prompting me? I want to say "No, and never show me this darn request again, dangit!"
View 1 RepliesEmpathy prompts to approve a subscription request.
I select "No" to deny the request.
If I reboot or logoff of machine upon re-boot the same subscription requests appear.
It is re-producible and happens every time. If I don't reboot or logoff the subscription request will no longer appear.
Why am I getting a message in Russian under the heading of "subscription request" where the messages about wireless internet pop up?
View 4 Replies View RelatedAfter I've booted my machine I can browse the internet over my wireless network just fine, but when I start Evolution email it prompts for my admin password beforeonnecting to ISPCan I automate / avoid my respnse to this password prompt ?
View 4 Replies View RelatedI'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
how to redirect all client http request to https request in squid
View 1 Replies View RelatedDoes anybody know where the "pay-per-year-instead-of-per-month-botton" is located. I can't find it
View 2 Replies View RelatedI recently installed Red hat enterprise 5 on a vmware esx server 4 and i didnt realize that for updates and patches you have to have a subscription to the red hat network. is there a free server linux OS that does not require this and is there a way to update on RHEL 5 without a subscription.
View 3 Replies View RelatedI want to subscribe to newsgroups pertaining to Linux in Thunderbird. To configure the subscription Thunderbird asks me to enter the server name for the newsgroups, but I don't know any server name serving newsgroups for Linux.
View 1 Replies View RelatedI am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies View Relatedwhats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies View Relatedwhen I boot my PC I get two password request, one is for it to be able to log in the wifi catcher and the other is just a pain in the ***, how can I set it to get just one again,
View 1 Replies View RelatedI have this annoying problem, when I boot my PC I get two password request, one is for it to be able to log in the wifi catcher and the other is just a pain in the ***, how can I set it to get just one again, or what could have happened? because I before I just got one.
View 2 Replies View RelatedI switched to Kubuntu with the upgrade to Lucid. After a couple updates, I started getting a "Gnome looking" unlock screen on my desktop at start-up. I get the regular KDE keyring password request and a second that looks like the Gnome keyring. I don't know how this happened. I checked in Synaptic and found the gnome-keyring was installed. Can I uninstall this or will that cause problems?
View 5 Replies View RelatedI am using Ubuntu 10.04 on my Macbook Pro 3,1. I would like it if there was an option in Preferences > Keyboard > Layouts > Options that if selected would swap the Ctrl and Command keys around so that those keys would behave like they do in Mac OS. On the macbook pro the keys go fn, ctrl, alt, command, space etc. and it's really much easier to use command (with your thumb) + z/x/c/v/b/w/q/r/a etc. than it is to use ctrl (with your little finger). If your keys are in the same order as mine, try it. I'm sure you'll find it downright awkward using your little finger for ctrl. You might think that I'm just not used to it but that's not it.
I was used to using ctrl for years and when I started using my macbook pro I was astounded by how much easier it is to use command. In Ubuntu 9.04 and 9.10 on my mac I was able to remap the keys with xmodmap but while with 10.04 the keys are remapped according to xev it has no effect on their behaviour. I can't imagine adding one more option to the list would be that hard. I have learned how to code in the past but it has been years and years and wouldn't have the first clue where to start in Linux. How I can find and contact the developers of this part of GNOME so that I can make the request?
I try use Squid as my proxy server. When I set my firefox to use my proxy server (squid), all is ok, but when I set firefox on another pc (from internet, not local network), all request returned time out turn off my router and connect PC to internet (without router), but still don't work.In iptables is all ok, I think. Where is problem? I think, It isn't problem with squid (because squid don't show error page), but I don't know how fix it
iptables:
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Edit: SSH from remote pc work fine.
I know it's safer not to block the request for a password that unblocks the keyring but I'm desperate.
The more I use ubuntu more times I'm requested to provide the keyring password. Now, this time, i've typed 7 times!
is there a way to limit this nighmare. Every time I bootup i got tired.
Every time I connect to my UBUNTU virtual machine, UBUNTU wants me to install the product.Why doesn't it remember that it has been installed each time I connect to it? My PC is Windows 7 and I am using VirtualBox to connect to the LINUX instance.
View 1 Replies View RelatedNew User to Ubuntu by the way. I have two computers, both running Ubuntu 10.4 fully updated and I am trying to bring files from one computer to the other with Filezilla ftp client. I was able to do this before, but I ended up having to reformat because of a driver screwup that I couldn't figure out how to fix. Now I am at a loss on how I managed to allow the computer with the files to connect to the one receiving the files. Computer A is the one that has the files that I am trying to send to computer B. Every time I try to send them over I get a "connection was refused" error.
Typed in the right IP, username, password, and port but still wont connect. Are there any things I have to do in terminal to allow access? I installed firestarter and just disabled it so ports should be open. By the way, I am using FTP because it was much simpler then trying to dink around with Samba and this is a pretty safe network.
- Enabled firewall, forwarded the ports in the events list then we get "request timed out"
- Reformatted> Fresh install >Updated
I'm dual booting Ubuntu 9.10 and win7. I have an NTFS partition on my disk and whenever i want to browse files on that partition I'm required to enter my password. my problem is that my music folder is located on that partition, and as a result, whenever I open rhythmbox, it cant access the files on that partition and begins to remove them from the library. in order to prevent this i must browse to that partition manually and enter my password upon request, prior to opening rhythmbox.
on a side note - shouldn't the spell checker on the Ubuntu forums recognize "Ubuntu" as a legit word ?
Since loading Lucid I keep getting pestered with a request to provide a password as the screen is blank.When installing Lucid and applying the Ubuntu-Restricted-Extras the screen went blank during the process and again there was the need to provide a password.Is there some way that I can avoid this continuous need to keep providing this information? It tends to be a pain in the backside.
View 6 Replies View RelatedCannot get vmware server to work properly running on ubuntu server 9.04
Trying to access the web interface have to highlight the url and keep hitting enter several times to get to the login and after logging in it is real slow and nothing works cannot create virtual machines
I added vmware server to an existing LAMP server
Running Ubuntu 10.04.Based on this guide, http://ubuntuforums.org/showthread.php?t=360901 I have WOL working, but to a certain degree. I set my MB bios up, installed the appropriate apps, setup rc.local to start ethtool -s eth0 wol g. I sent a wakeuplan command from another machine and the PC started up.
The only issue is that when it comes out of hibernate from the wakeonlan request eth0 doesn't autoconnect, so if I try to remotely wake it, once it boots into the gui eth0 will remain disconnected until I manually start it.
How can I disable the password request when i login? Not the password for the user but the password to connect to the net?
View 5 Replies View Relatedettercap can see http request but not response
I'm trying to see regular http responses from my wireless ipad (victim) from my wired pc (attacker). Everything's working great but I can only see the http requests not the responses.
I've done much reading and googling and tried registering in more relevant forums but some forums were shutdown, so I've come here.
Code:
# setup ip forwarding
echo 1 | sudo tee /proc/sys/net/ipv4/ip_forward
# use ettercap to do the mitm using only mitm
sudo ettercap --iface eth0 --text --plugin autoadd --only-mitm --mitm arp:remote /192.168.0.1/ /192.168.0.155/
[Code]....
I have an MD3000 storage attached to dell server via sas cables, running ubuntu server.
the kernel keeps throwing these messages every other second on the console, but the drives from MD are fully accessible.
Jan 3 12:04:24 node2 kernel: [71041.035822] sd 5:0:1:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jan 3 12:04:24 node2 kernel: [71041.035828] sd 5:0:1:0: [sde] Sense Key : Illegal Request [current]
Jan 3 12:04:24 node2 kernel: [71041.035833] sd 5:0:1:0: [sde] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1
Basically I want to change the resolution on my computer as the desktop is partially lost off of the screen. The needed resolution is not available so I am attempting to add a new resolution. I have used the [URL] for information on how to do this. I am completely new to Ubuntu and entering code so a TON of the results online have meant jibberish to me as people leave out the basics which I cannot find. Here is what I've done so far in the terminal...
I enter:
xrandr
I get:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
HDMI-0 disconnected (normal left inverted right x axis y axis)
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm
1920x1080 60.0*+
1920x1080i 30.0
1280x720 60.0
2020x1180_60.00 (0x169) 200.0MHz
h: width 2024 start 2160 end 2376 total 2728 skew 0 clock 73.3KHz
v: height 1180 start 1183 end 1193 total 1224 clock 59.9Hz
I enter:
xrandr --newmode <Mode''Line>
I get:
bash: syntax error near unexpected token 'newline'
Already I see an error message though without knowing what else to do I try to continue the code as follows...
I enter:
cvt 2020 1180
I get:
# 2024x1180 59.90 Hz (CVT) hsync: 73.31 kHz; pclk: 200.00 MHz
Modeline "2024x1180_60.00" 200.00 2024 2160 2376 2728 1180 1183 1193 1224 -hsync +vsync
At this point I see it shows 2024x1180 when I actually entered 2020x1180 which I find odd, though I try the next part with both 2024 and 2020 with same results.
I enter:
xrandr --newmode "2020x1180_60.00" 200.00 2024 2160 2376 2728 1180 1183 1193 1224 -hsync +vsync
I normally get no response after with a blank cursor, though one time I got:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
Serial number of failed request: 27
Current serial number in output stream: 27
I recently ran into the following problem when trying to ssh into my Ubuntu 11.04 server:
>> ssh user@site.com
PTY allocation request failed on channel 0
I don't know for sure, but I think this happened after one of the latest Ubuntu updates I installed. In case it's of relevance, I'm remoting in from Terminal (Mac OS X 10.7 - Lion). Edit: The problem seems to be with Lion..
[Code]...
I had that standard "Ubuntu Firefox Modifications" addon/extension in my browser and it turned out that one of the things it does is automatically manipulate the language settings in Firefox so that it reverts to a setting everytime firefox starts. So basically in my Ubuntu computer I am not allowed to change the preset of the language of my browser.
This is the item controlled by the "intl.accept_languages" line in about:config, which everytime it is changed (either by me or by a software) Ubuntu sneaks up and reverts the setting back, so that every time I restart/reopen Firefox I am back to square one. The thing is this wasn't the case until recently. I have no idea what happened or when or how but obviously I don't want it and I want to know how I can get back to the way it was.
the thing is I need to install request tracker in my ubuntu system.i had installed all the applications which are needed in this. this is the output of make testdeps
SOME DEPENDENCIES WERE MISSING.
ICAL missing dependencies:
Data::ICal ...MISSING
STANDALONE missing dependencies:
HTTP::Server::Simple::Mason >= 0.09 ...MISSING
GPG missing dependencies:
GnuPG::Interface ...MISSING
[Code]...
i had tried to install all those in cpan promt as well as in #. but didnt able to suceed.