OpenSUSE Hardware :: Alteration In Fonts Looks After Change Of Graphic Drivers From Nouveau To NVIDIA?
Jan 8, 2011
I recently changed my Graphic card drivers from Nouveau to nVIDIA in Suse 11.3 KDE.
One thing I have noticed that initially I had been using various Adobe Fonts in many applications prior to change of drivers. But after this change the looks of the same fonts became quite different, the length & breadth of "individual letters" changed quite a lot making them look not so beautiful as they were earlier. Am I missing something or is it a normal phenomenon. But I am satisfied with the present looks.
After installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...
As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.
I've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
I have two Ubuntus installed on my computer, but 10.04 doesn't have the right graphics driver, because it's not fast like the other one.So I need to change my graphics driver.Does anyone know how?
I had dual screen config (large desktop) going on 11.2 with proprietary nvidia driver without problems. After upgrade to 11.3 this didin't work. I was not able to find a way to configure nouveau drivers, and it was stuck in the 'twinview' mode, so decided to install binary nvidia instead (the 'hard way'). Took me a while to figure out 'nomodeset' thing, but in the end drivers were installed successfully. The problem now is that only monitor displays anything, and I can't find the nvidia control panel to activate second monitor and extend the desktop there.
Used to be able to install nvidia control panel easily in 11.2 with one-click install, but for 11.3 the page says that the one-click install buttons aren't ready yet (SDB:NVIDIA drivers - openSUSE) So my question is 'how to get dual screen going and extend my desktop to second screen using 11.3 and nvidia 210 card' ? And I don't care whether it's nouveau or proprietary drivers, as long as it's easy to configure and it works.
Im thinking of getting a new machine-the only thing is a lot pc's these days ship with ati cards rather than nvidia cards. ATI will work on windows ok but i seem to recall linux support for ati being somewhat non existent...since i will have a windows/opensuse dual boot on the machine should i stick with nvidia for the graphics card then?
I'm still using Firefox 4 beta11, how to upgrade to ff 4 final? I'm using openSUSE 11.3 (tried to install 11.4 but live-cd won't run on my nvidia graphic)
I have got notebook HP 4710s and I can't get drivers for graphic card ATI Mobility Radeon HD 4330. ATI repository for openSUSE and SLED doesn't working. Do you know when Can I get it?
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
I tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q' but when trying to configure the x-server su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that: 1) removing SLI helped a little bit 2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
I have installed the nvidia drivers (first the nvidia-glx-96, then the nvidia-glx-173 and last the nvidia-current or nvidia-glx-185) in ubuntu 10.10, and i need to know what i need to change to run with version 96 sometimes then change to 173 or 185 other times, because the same hd must run on other hardware sometimes.I think its just a case of change a symbolic link to start another version, but im not sure.
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation Model: G98 [GeForce 8400 GS] 2D driver: nouveau 3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
I have installed SUSE 11.3 and I am using KDE4. I also installed the font "misc-console".
After installing the NVIDIA driver 256.53 the font misc-console becomes useless because it is displayed so much slanted that it is imposible to read. However, if I disable the NVIDIA driver (by replacing "nvidia" with "nv" in xorg.conf), then it works fine. It also works fine in KDE3 and the NVIDIA driver. So, it seems to be a combination between NVIDIA and KDE4. A lot other fonts are also overly slanted and unreadable (like "Sony fixed", "misc fixed", etc.).
If I launch konsole from a terminal, I receive the following warning:
konsole(6928) Konsole::TerminalDisplay::setVTFont: Using an unsupported variable-width font in the terminal. This may produce display errors.
Is there a way that I can use "misc-console" without having to uninstall the NVIDIA driver? I'm just used to this font for my terminal.
The same happens whether I install the driver manually or through YAST, 32 or 64 bit. The video card is NVIDIA 8400GS, the system Athlon 64 4400+
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
Whenever I login or restart the computer, my resolution gets reset. I think it may have to do with my setup being connected to a 18.5" HDTV. Is there a way to set custom resolutions in the OS, so that Nvidia and OpenSUSE can recognize them?
03:00.0 VGA compatible controller [0300]: nVidia Corporation ION LE VGA [10de:087e] (rev b1) Subsystem: Acer Incorporated [ALI] Device [1025:0222] Kernel driver in use: nvidia
I have Fedora 15 installed in my PC and I use it both for gaming and work. Now the open source nouveau driver was working fine, until I had to install the nvidia driver so that I could play torcs, as I was unable to get good graphics in nouveau. Now, when using the nvidia driver, the gnome shell has become too slow and sometimes unworkable, though games run good. Is there any way so that I can use both the drivers and switch between them when needed (say use nvidia when gaming and nouveau while at work) without uninstalling and reinstalling them?
PS: when I boot up, the grub shows two options, one is the fedora with latest kernel and other is the old kernel. Is there a possible way that I use nouveau with old kernel and nvidia in the new kernel? This will really help in switching games and work.
Now that nVidia is up and running, I'm curious to do a comparison with Nouveau. I there an EASY way to do this? Like a simple on/off switch? Major system/kernel changes are not an acceptable option. If it can't be easily done, I'll just stick with nVidia.
this may be asking too much (especially from leigh123, 'cause i know you're working hard), but i've lost track of the current status of the great nvidia driver vs. nouveau driver debate, and what we can hope to see in f13 in about 20 days. could you provide or point us to a layman's summary of what graphics capabilities we can expect with a "default" configuration when we bring up f13?
in particular, can we expect nouveau to provide 3-d for f13 (or in the near future)? nvidia install guides, leigh123, but despite your best efforts, the procedures seem to be getting more involved as time goes on, not less (and not noticably more reliable, either). between graphics card drivers and flash plugins fighting firefox (not to mention adobe fighting videos and hulu) it's discouraging to actually lose capabilities that were once available when upgrades are made.
I've experienced the great functionality that nouveau gives me, but am a bit disappointed that it cannot support 3D acceleration. I play a few games so this is a requirement.I don't want to switch completely back to the NVIDIA driver because it breaks my brightness control keys on my laptop, and it isn't as fast and responsive as nouveau.Is there a way to have nouveau run by default, but when I launch a game in a separate X server it would load the NVIDIA driver?
When I increase the font size from Konqueror settings the web browser fonts change but the file manager fonts stay the same. Is there another way of setting them?
I need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.
