Now that nVidia is up and running, I'm curious to do a comparison with Nouveau. I there an EASY way to do this? Like a simple on/off switch? Major system/kernel changes are not an acceptable option. If it can't be easily done, I'll just stick with nVidia.
View 4 RepliesI've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
View 6 Replies View RelatedOnly about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
this may be asking too much (especially from leigh123, 'cause i know you're working hard), but i've lost track of the current status of the great nvidia driver vs. nouveau driver debate, and what we can hope to see in f13 in about 20 days. could you provide or point us to a layman's summary of what graphics capabilities we can expect with a "default" configuration when we bring up f13?
in particular, can we expect nouveau to provide 3-d for f13 (or in the near future)? nvidia install guides, leigh123, but despite your best efforts, the procedures seem to be getting more involved as time goes on, not less (and not noticably more reliable, either). between graphics card drivers and flash plugins fighting firefox (not to mention adobe fighting videos and hulu) it's discouraging to actually lose capabilities that were once available when upgrades are made.
I've experienced the great functionality that nouveau gives me, but am a bit disappointed that it cannot support 3D acceleration. I play a few games so this is a requirement.I don't want to switch completely back to the NVIDIA driver because it breaks my brightness control keys on my laptop, and it isn't as fast and responsive as nouveau.Is there a way to have nouveau run by default, but when I launch a game in a separate X server it would load the NVIDIA driver?
View 2 Replies View RelatedAfter installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...
As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.
[URL]
First some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies View RelatedI am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
Anyone knows the easiest way to switch from the nvidia drivers to teh nouveau drivers in the latest kernel?
View 2 Replies View RelatedI made a fresh installation of Ubuntu 10.10 (64 bit) on a Sony PCG-81112M, the graphic cards is identified by lspci as "nVidia Corporation GT216 [GeForce FT 330M]". Quite frequently everything but the mouse pointer freezed on the screen, I found no way to recover from these situations but to restart the computer using the power button.
I decided to install the proprietary driver (as this is the recommended driver, I was confident this would solve the problem). As a consequence the system now hangs on boot after showing the Ubuntu 10.10 inial logo/text. I could start in recovery mode, but I'm not sure to which driver I should try to change to. I really need no fancy 3d stuff, just a robust computer to which I can attach and detach an external screen.
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
I was having slowdown freezes with the NVIDIA proprietary drivers for Ubuntu 11.04 (additional drivers), so I decided to try the latest binary from nvidia that I had to install manually. I purged the system of the nvidia drivers and then installed the manual nvidia driver (sudo apt-get --purge remove nvidia-*). But I got the same slowdown freeze (just took a lot longer to happen now) and when I uninstalled the manual nvidia driver, X would fail to initialize (no nvidia modules). Is there a package or configuration utility I could use to install the nouveau driver after removing the manual nvidia drivers or am I screwed? Cause the Nouveau driver works fine, I just wanted to see if I could switch to Linux since all the games I play work fine through Wine.
View 1 Replies View RelatedI have Fedora 11 installed on a system that initially had an ATI 1650 type card. I recently replaced it with a GeForce GT 220. I don't believe there was ever an xorg.conf generated or used with the ATI card. Initially, when I replaced cards and rebooted, I was able to start up KDE or GNOME but with only 2 very low resolutions available(the highest being 800x600). Next I ran Xorg -configure to generate an xorg.conf file. Everything I am seeing in this file seems to make sense. But now, when I startx all I get is a red error box being displayed by the CRT monitor with this message:
Signal Frequency is out of range
FH 30.1 kHz FV 24 Hz
Please Change Signal Timing
The only way I can get my X system back is to go into the xorg.conf file (in the Device Section) and change the driver to vesa. But I still only have 2 very low resolutions available.
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies View Relatedill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies View RelatedNouveau won't go away.I done the rdblacklist in grub and blacklist in modprobe.d but it still persists.Is there something else I need to for Fedora 15?
View 7 Replies View RelatedI recently changed my Graphic card drivers from Nouveau to nVIDIA in Suse 11.3 KDE.
One thing I have noticed that initially I had been using various Adobe Fonts in many applications prior to change of drivers. But after this change the looks of the same fonts became quite different, the length & breadth of "individual letters" changed quite a lot making them look not so beautiful as they were earlier. Am I missing something or is it a normal phenomenon. But I am satisfied with the present looks.
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies View RelatedUsing Jessie, Iceweasel 38.6.1 and
Shockwave Flash
File: libflashplayer.so
Path: /usr/lib/flashplugin-nonfree/libflashplayer.so
Version: 11.2.202.569
State: Enabled
Shockwave Flash 11.2 r202
Cannot view video from [URL] ....
Pop-up window says Silverlight is required to play videos on Toggle.
Google around but no Silverlight for Linux.
Background: I am running Debian 8 with the Xfce DE on my Toshiba Satellite Laptop.
When at home I will connect my laptop to an external display. I did the same while I was running Ubuntu; however, with Ubuntu I could activate my laptop display by simply disconnecting the external monitor. With Debian + Xfce, unplugging the external monitor leaves my laptop screen blank.
In order to activate my laptop display, I have to open Display settings, turn on laptop display -- which still leaves my laptop screen blank -- and then switch resolution: there are two listings for 1366x768 under resolution, and only the second one restores my laptop display. Please note that if I have both displays on at the same time the size of the output on my external monitor will be reduced to about the size of my laptop's display.
I would like the create a Bash script which can automatically switch between my displays. After some Googling it seems like xrandr is the tool I need for the job. However, I have been having trouble getting it to work.
I tried the command Code: Select allxrandr --output LVDS1 --auto --primary --output HDMI1 --off. This however just turns my external display off without turning on my laptop's display. I suspect this has something to do with the fact that LVDS1 has two modes at 1366x768; perhaps only one of them can actually display? I'm not sure, but anyways here's the output of xrandr:
Code: Select allScreen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
  1366x768   59.99*+
  1360x768   59.80  59.96Â
  1024x768   60.00Â
  800x600    60.32  56.25Â
[Code] ....
Is there a way I can specify that xrandr should use the second 1366x768 mode?
I just realized that the second mode is, in fact, 1360x768 rather than 1366x768...
The good news is that I fixed my problem. It turns out that my backlight was not turning on, giving the appearance that my laptop screen was not displaying anything.
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
As Pat stated in the Changelog, Slackware-13.1 don't ship the nouveau X driver (yet).But it's not hard to get it either.
1. Upgrade your kernel to 2.6.34
2. Get and install the driver:
Code:
git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
cd xf86-video-nouveau
./autogen.sh
make
[code]....
PS. There is no source tarball yet for this driver.If you want to upgrade:
Code:
cd xf86-video-nouveau
git fetch
git rebase origin
[code]....
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I've started playing around with debian 6 stable, and was just wondering if its worth it to go to the trouble of removing nouveau, or if it will handle everything well enough. I use my laptop for a little bit of gaming (older games) under wine, all the basic email/web browsing/writing stuff, some photo editing under gimp, movies/music, and a very little bit of Blender work.Will Nouveau handle all this well enough, or should I use the proprietary nvidia driver?
View 6 Replies View RelatedI have installed debian jessie stable and would like to use hardware decoding with the nouveau driver. I have tested with the propietary nvidia 340.65 driver and MPV and successfully enabled hardware decoding. However, there seems to be a frame sync issue with mutter and nvidia that I want to avoid. I've followed the instructions for enabling hardware decoding with nouveau here, hURL..., but haven't had success. What I've done so far is install jessie stable, run updates, install mplayer2, mpv, mesa-vdpau-drivers, and follow the previously mentioned guide. Mplayer2 throws an error about not finding the proper codec. MPV at least attempts to play the video but promptly freezes the system so that I can't recover without rebooting. URL....
View 0 Replies View RelatedI'd like to run a real-time kernel with the latest linux-rt patch, for 2.6.33. Incidentally, the .33 kernel was the first to include the Nouveau driver, and seeing that I cannot get the proprietary NVidia driver to compile --the RT patch really messes things up and the patches for nv-linux.h out there all seem incomplete-- I thought it would be a good idea to switch to Nouveau and save me from additional headaches.
I'm running sid, and as you certainly know, the Nouveau driver has been backported to the stock Debian kernel, 2.6.32-5-686. It works very well, all I had to do was change my xorg.conf with this line : Driver "nouveau".
However, when I boot my new 2.6.33-rt kernel, Xorg stops here :
[skipping a lot of stuff that seems to work ok]
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.15
[Code]....
So what is so different about the backport to 2.6.32 ? How come the DRM lib, or whatever it is, doesn't work with 2.6.33 ?
I just thought of something, I'll try compiling my 2.6.33 kernel without the -rt patch and I'll let you know.
I need to use the proprietary NVIDIA driver instead, but it can't install while this is active. I'm working off a fairly fresh install anyway, so I can reinstall debian if the option to not install nouveau is present somewhere during the install process. Or, is there an easy way to get rid of Nouveau from my current install altogether?
View 5 Replies View Related