I useing a 4bg usb stick which has been formatted on ubuntu 10.10 i am installing a linux bootable OS on the disk-debian just as the bootloader is installed on the usb I get a fail /error reponce
"an uncaught exception was raised: invaild version string "GNU/Linux"
So I installed the Unison synch software with sudo apt-get install unison-gtk. When I set up the two directories for synchronization it looks like this: $ unison ssh:\SERVER\pathpath /var/www/path/path/path
I am getting this error in terminal Uncaught exception Gtk.Error("GtkMain.init: initialization failed ml_gtk_init: initialization failed") Fatal error: exception Util.Fatal("Error in getLogch: /home/path/.unison/unison.log: No such file or directory"
Lasted repositories: Index of /repositories/X11:/RemoteDesktop/openSUSE_11.3/i586
FreeNX-0.7.2-28.1
NX-3.4.0-21.1
To day I try install on openSUSE 11.3 and SLES11-SP1, Not finish. Error: Could not find 1.5.0 or 2.[01].0 or 3.[01].0 version string in nxagent. NX 1.5.0 or 2.[01].0 or 3.[012].0 backend is needed for this version of FreeNX.
# nxsetup --install
Removing special user "nx" ...no crontab for nx
done
Removing session database ...done
Removing logfile ...done
sent invalidate(passwd) request, exiting
sent invalidate(group) request, exiting
Setting up /etc/nxserver ...done
[Code]...
I am using fedora11 64 bit.My problem is,today morning i start the computer,then an error raised.
i.e could not update ICEauthority file /var/lib/gdm. ICEauthority
Actually yesterday ,i changed the permissions of /gdm file,with this command:
My system is not working now...how can i solve this problem with out loss of any data.
Ubuntu 9.10 64-bit. I was importing photos into f-spot. Then my laptop shutdown because it overheated (a different problem). Now f-spot will not open. A dialog pops up and says "F-Spot Encountered a Fatal Error. Exception has been thrown by the target of an invocation." Here are the error details:
Code:
An unhandled exception was thrown: Exception has been thrown by the target of an invocation.at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000]
[Code]...
I've read somewhere that there might be a bug with themes, but I've changed mine back and forth. I don't really think this is a bug as much as something that happened when the computer crashed. I've tried uninstalling f-spot and reinstalling it, I get the same error above. Anybody have any idea on how to get it working again?
I want to compile ekiga 3.0.2 for ubuntu 10.04. But when I enter 'make' command in the terminal windows, it says that;
[Code]...
I tried to solve the problem by setting CFLAGS = -fexceptions, in the Makefile. But it didn't work.
How do I do it? I've got ccsm installed, but the "raise window" checkbox does nothing.
View 6 Replies View RelatedI have perl/tk installed and working. I tried using c++/tk and had to change the #include path in the headers to find the tk.h and tcl.h. I tried compiling a simple c++ program with g++ to test that the headers are correct. the line i type at console is:
g++ test.c cpptk.cc cpptkbase.cc -o test.bin
I fixed all previous errors, except for the following.
code....
I have a dell inspirionB130 and I installed mandriva dual boot with windows 7.. However I was not able to connect to a wireless network, but yet I could when i switched back to windows 7. Ive also just been wanting to try other versions of Linux to see which one I would prefer.. But Im not really sure on how to uninstall Linux or replace it with different version.. I have read in this link Mandriva Installed with Windows; Looking to try another Linux Distribution Read more: URL... here and I was wondering if this was a correct way of doing it, I just didnt know if some kind of conflict would occur when doing this, or if other people suggested a different way.. Specifically talking around middle of the page under "Mandriva Installed with Windows; Looking to try another Linux Distribution"
View 2 Replies View RelatedCode:
ali@localhost ~]$ k3d
ERROR: Exception loading options: no element found line: 1 column: 0
WARNING: Resetting options data to version 4
(k3d:12030): GdkGLExt-WARNING **: cannot load PangoFont
Segmentation fault (core dumped)
I upgraded from 10.10 to 11.04. on boot up I sometimes get only the purple screen freeze and sometimes I actually get to the grub menu. I select the generic kernel and get the black screen freeze. same if I do the recovery mode. but if I get lucky on a reboot and can get the grub menu up again, I select previous linux version and then select 2.6.35 generic and it will boot into 11.04 with Unity. So, how can I get this thing to boot normal with the correct kernel version? I am fairly new to this linux world and don't want to have to go back to windows if I can help it.
View 5 Replies View RelatedI have an old laptop and want to install linux on it. It's a Toshiba Satellite A-15 S1292. I upgraded it several times. Currently, it has a Intel Celeron 2.4 GHz single-core, 1 GB RAM, 110 GB hard drive, Intel (GMA) 852GM 32 MB shared video. I was planning to install red hat on it but don't seem to have any easy way of download the iso so I going with fedora 14 URL...Can some one please tell my if I'm heading in the right direction. If someone installed linux of this laptop and had any problems, please tell me about them.
View 14 Replies View Relatedcopy string a to string b and change string b with toupper() and count the chars
View 3 Replies View RelatedI'd really like a Windows version of the 'Monospace' font. In other words that exact font, I don't mean 'I want a monospaced font for Windows'.
View 1 Replies View Relatedguide me to a download link so i can download the red hat linux version 4.5?
View 4 Replies View RelatedWhat is the first Matlab release that fully supports 64-bit? Is it 2010a? I've got 64-bit installations of Linux and Mac OS X, and want to make sure I install a copy of Matlab that takes full advantage of 64-bit and the resulting larger memory support.
View 1 Replies View RelatedIs it possible to download linux redhat version 4.0 free..? If anyone provide me the link.
View 1 Replies View RelatedI'm currently trying to get my wireless card to work with ndiswrapper after installing backtrack4 today, BUT.When I try and use the make command it tells me that some or another file is missing. I've checked and the output is right, There is no file of that name but there is neither a folder of that name.
Code:
root@bt:/usr/src/ndiswrapper-1.56/ndiswrapper-1.56# make
make -C driver
make[1]: Entering directory `/usr/src/ndiswrapper-1.56/ndiswrapper-1.56/driver'
[code]....
I'm looking if it is possible to change the whole Linux install without having to boot up using a live-cd.
The purpose is to remotely log on to a machine using SSH or other to replace the complete installation, without loosing network setup so I don't loose contact with it. Perhaps loading the live-cd while linux is already running?
I am an openSuSE user for many years. My current installation is openSuSE 11.2. However, my first was SuSE 6.4 and I have been _constantly_ upgrading since then until reaching the current openSuSE 11.2. The technical issue I have been facing lately is with the kernel version of my current system: although it should be 2.6.31.5-0.1-desktop, as this is the one I have chosen via the online update mechanism and the yast2 system boot-loader procedure, grub shows it as preselected, the boot procedure in the end greets me mentioning this very kernel version, _but_ when I issue the command: uname -a in a command prompt, I am informed of using linux kernel version: 2.6.18.2-34-default #1 SMP PREEMPT
I am really quite puzzled, since I _cannot_ find any such vmlinuz file under /boot/ ! Could it be that my system properly runs with the expected kernel version, but uname mistakes it with a different one? Is there a way to determine the actual version of the linux kernel that my system currently runs with? If it's a problem with uname, have you got any suggestions that could potentially shed some light towards the origin/cause of the reported issue?
I am trying to install ns2.1b5 on fedora and I am getting the following error:
No rule to make target `VERSION', needed by `gen/version.c'
I would like to install a more modern version of GNU utils (coreutils) on a debian linux system where I have no admin rights. Is there a way to do that?
The rationale is that I need a more modern version to the one installed in the system where I intend to run my analysis. I am trying to use "sort -R" or "shuf" to randomize lines in a big text file.
I have the DVD installer of Fedora 10, i want to dual boot with windows vista. well i get up to the partitioning part of installation (in anconda) and it asks me how i want to partition it... i wanted to re size my partition and create the default format, so i keyd in 70GB and Okay. then it came up with an error, saying I had bad sector(s) The error told me to run chkdsk /f /r in windows, then i could run ntfsresize with -b, (in Linux) well i did all those steps, and shrunk /dev/sda1 to 70gb (/dev/sda2 is my recovery partition) i have a 140 gb hard drive, but can't find the unallocated space anywhere!
when i booted windows, it ran a chksdk, like it should, and in my computer it said that it had been shrunk (because the pie graph showed a capacity of around 70GB) When i go into windows disk management it says no unallocated space, just one big partition (and a 8gb recovery partition) this is the same with GParted on puppy linux, GParted on fedora 10 (live cd) says there is no drives I can mount or unmount and same error on partition logic... in EASUS partition manager i get told that there is no unallocated space, in the fedora installer there is only /dev/sda1 and /dev/sda2. Does anybody know.. how to install fedora on this partition, or get rid of the partition and repartition it another way. when i click on the option to remove all linux partitions and create default format, it errors and says it cannot make another primary partition, then says there is no room for /boot. and i can not proceed.
My ubuntu stops when mounting system hdd. The screen display the following messages :
mountall:/etc/fstab: No such file or directory fsck from util-linux-ng 2.16 WARNING: couldn't open /etc/fstab: No such file or directory init: mountall main process (545) terminated with status 1 General error mounting filesystems. A maintenance shell will now be started. CONTROL-D will terminate this shell and re-try. udevd[560]: can not read '/etc/udev/rules.d/z80_user.rules. Ubuntu: clean, 474879/24231936 files/28016581/96898047 blocks root@i7:~# exit_
I suspect the disk manager pysdm that i had just installed today and it had crash during the previous session. The /etc/fstab file does not exist anymore and i cant rename the fstab.bak because the disk is read-only even for my root user
When I compile my application, I received following error: ERROR: Source object libxml2.so has EABI version 0, but target turbine has EABI version 4. So I need a libxml2 file with ARM EABI version 4. Can I find one from the internet? or does anyone know how to create one?
View 1 Replies View RelatedI'm running Kubuntu 10.04 and am trying to install OpenVPN as per the instructions here:-[URL]..However, when I try enter the following I just get a continuous "string is too long, it needs to be less than 40 bytes long" message.
./pkitool --initca I've had a look around in the forum and in google and can find a reference to this problem with 9.x but from what I can see this has supposedly been fixed for v10.04. Is there some sort of workaround I can apply to get this to work?
Iḿ trying to install TCL 8.0.5 onto my machine, if i type �wish it tells me there are already these programs:
Code:
The program 'wish' can be found in the following packages:
* tk
* tk8.4
* tk8.5
* tk8.3
Try: sudo apt-get install <selected package>
The error trace is here:
Code:
luke@luke-laptop:~/Downloads/tcl8.0.5/unix$ ./configure
loading cache ./config.cache
checking for ranlib... ranlib
checking whether cross-compiling... no
checking for getcwd... yes
checking for opendir... yes
code....
checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string
Really not sure whats wrong, I�m horrible with linux if I�m honest, tried a couple of google searches but didn�t make very much progress.
I'm running into some issues when trying to run codeblocks on ubuntu 9.10 amd 64 bit.
When I attempt to run the program via terminal I get a Bus error.
Code:
desktop:~/Desktop$ codeblocks
Bus error
Further digging using gdb displays the following results.
Code:
desktop:~/Desktop$ gdb codeblocks
[Code]...
Nearest I can tell ld-2.10.1.so belongs to either libc6-amd64 or libc6 packages. I've tried reinstalling both in case it was a corrupt file to no avail. At this point i'm completely lost at what to do. Also just let me know if you need any other information.
I have a String that I would like to sign using a given RSA Private key. I thought this would be relatively easy but I have not been able to find out how to do it, unless I'm looking to far into a simple problem. Do i have to put the string into a file, and sign the file, or can i just sign the string/message?
View 7 Replies View Related[code]...
How do I fix this?