Whenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.
View 2 Replies
I can play CDs and DVDs but when I try to burn a music CD I get:
error while burning
an unknown error occurred
when the CD is finalising. As data has been written to the CD, but not finalised, each time I try I use another CD.
I've used Brasero and whatever the default burner in 9.10 is with the same result. If I boot in Win7 I can burn CDs.
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
I've been having issues with the omega.cert on Pidgin and tried to upgrade to 2.7.7 today. I clicked on the link from the Pidgin site to download the ppa package "pidgin-ppa_0.0.3_all.deb" and tried to open with GDebi Package Installer but it tells me it couldn't be opened because an unknown error occurred.
View 5 Replies View RelatedAfter an automatic update from Debian I get the following error while starting a root terminal:
An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly.
Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
After updating and subsequently restarting today, I can no longer bring up my wireless interface:
ifup wlan0
SIOCSIFFLAGS: Unknown error 132
Could not set interface 'wlan0' UP
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
Failed to bring up wlan0
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID: off/any
Mode: Managed Access Point: Not-Associated Tx-Power=off
Retry long limit:7 RTS thr: off Fragment thr:off
Encryption key:off
Power Management:off
lsmod | grep iwl
iwl3945 77904 0
iwlcore 127432 1 iwl3945
mac80211 180929 2 iwl3945, iwlcore
cfg80211 142905 3 iwl3945, iwlcore, mac80211
I'm having problems installing Ubuntu 10.10 Netbook onto my Asus 900. I downloaded the .iso then used the "make startup disc" feature in my Mint 9 desktop machine to make a usb install disk. All appears well at that point. When I try to boot from the usb stick, I get an error message as follows:
"SYSLINUX 363 Debien-2008-07-15 ......
Unknown Keyword in Configuration File
boot: "
and the cursor just hangs there and doesn't respond to the keyboard.
I also tried it on another Asus and a Gateway Laptop with the same results.
My intention is to have this the sole OS on my little Asus 900.
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
I have a backup of /oracle in redhat linux advance server 2.1,i have taken that backup by tar -cvzf command when untar this backup by tar -xvzf command the following error occurred-"Error exist delayed from previous error"
View 2 Replies View RelatedI tried to install last Ubuntu distribution (11.04) in a laptop that fits setup requirements. I downloaded de Iso, burnt on cd and restart the laptop with the cd inside it.The hard disk does not have any partition, it's empty, I suppose installation gives that opcion.At the begining of the installation, before any interactivity, I get this error:
View 2 Replies View RelatedI switched from Ubuntu to Fedora and I'm having a little bit of trouble understanding why I cannot update my system. Fedora seems to be a little bit more complicated than Ubuntu to update and to do other things... I'm still willing to try it because it has a good reputation and good reviews so I will go ahead and give it a shot but before I do that I need to update it. I have an HP pavilion notebook dv2000. Just installed Fedora 15 and my system is telling me that I have over 700 updates! when I click on install updates I get an error:
Transaction error An unspecified transaction error has occurred. More information is available on the detailed report. Then on the details this is what I get:
[Code]....
I'm emulating Ubuntu using VMWare and I've upgraded it to Maverick version. When I boot the system I get this error (below the Ubuntu logo): "an error occurred while mounting /mnt/hgfs" I have to click S to continue and the the OS seems to work well.
View 6 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedWhen i try to add value 150 on portflood section of csf,i get following error:
iptables: Unknown error 18446744073709551615 PORTFLOOD tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:80 state NEW recent: UPDATE seconds: 5 hit_count: 150 name: 80 side: source
Error: iptables command [/sbin/iptables -v -A INPUT -i ! lo -p tcp --dport 80 -m state --state NEW -m recent --update --seconds 5 --hitcount 150 --name 80 -j PORTFLOOD] failed, at line 996
how is limitation with ip_recent where highest value for hit_count is 20,and how i need to modify and recompile ip_recent.But i was not able find anything about either modify or recompiling that module.I have cent os 5.4 64 bit,iptables are installed over yum.Also i have 4 servers with completely identical configuration,yet on two servers portflood works while on other two it reporting that error.Maybe it was different install cd which caused this,but again i dont know why this doesnt work since iptables version are indetical.
I installed fedora 12 today...installation went fine. Tried to run the software update ( which includes 415 fixes) and got the following
Transaction error:- an unspecified transaction error has occurred. More information is available in the following report.
More details show:- could not add package update for abrt-plugin-runpp-1.0.4-1fc12(i686)updates:abrt-plugin-runapp-1.0.4-1.fc12.i686
I have unchecked the box in the update list to be installed, but the software update insists that this update is needed. I cannot progress any further than this error message..
From four days each time I reload Synaptic, I got the following error:
Code:
W: Failed to fetch [URL]. Could not resolve 'repository.cairo-dock.org'
W: Failed to fetch [URL]. Could not resolve 'repository.cairo-dock.org'
W: Some index files failed to download, they have been ignored, or old ones used instead.
I can not understand what is it. Is it a temporary network problem? What I have to do?
When I start my system up(ubuntu 10.04) it gets to "ubuntu" loading animation then displays "An error occurred while mounting 0, Press S to skip mounting or M for manual recovery". I've read many threads and tried different things but nothing seems to be working!
heres my blkid output:
/dev/sda1: UUID="e1606c6e-e959-492d-824e-c0a8f0cd619b" TYPE="ext4"
/dev/sda5: UUID="d5492173-5794-46af-aa21-87abe18d571a" TYPE="swap"
I am running ubuntu 10.04 lts of a dell inspiron 600m I went to the update manager and updated all available updates after it was done I got this error in the update manager window: An error occurred The following details are provided: E: linux-image-2.6.32-26-generic: subprocess installed post-installation script returned error exit status 1
View 8 Replies View Relatedseems im getting this error when i update.I searched the forums for similar errors but i found no solution that worked for me. this is the error>>>>>
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL]: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead
How do i get the correct key?
Havent got a clue why this started to happen recently, it says press S to skip or M to fix manually, i always skip adn everything is just fine, just would like to know why im getting this message and how to get rid of it
View 9 Replies View RelatedI had been running a dual boot windows XP & Ubuntu. Graboid worked in both systems. I have now got rid of windows, upgraded to 10.10
I installed wine, winetricks & dotnet20, but when I click on my downloaded Graboid.exe file I get the following error:
Command line output code...
Trying to burn a DVD full of media and I keep getting errors on both above programs. Here is the error oupout I get from Brasero:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]......
Session error : An error occurred while writing to disc (brasero_burn_record brasero-burn.c:2862) Anyone know what I can do to fix this and get things up and running again? Would like to be burning to DVD's again. Running 11.04 and also had the same problem with 10.04.
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View RelatedMy system is playing CD's fine but I just tried a DVD (non-BluRay) and I get that error! I have googled about and though I already had the ubuntu-restricted-packages I didn't have all the gstreamer0.10plugins-bad installed (as seems to be the recommended fix). I now have them and MoviePlayer still gives the same error. I also want BluRay's to be playable and I was investigating that when I thought I would check whether normal DVD's were still working (I'm not sure whether I've tried a DVD since I upgraded to MM). The DVD mounts ok and appears on my desktop with the title.
View 5 Replies View RelatedI just installed Ubuntu. I like it so far. After installing like 10 apps, I started getting this error: Quote: An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at www...
[Code]...
I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
