I had been running a dual boot windows XP & Ubuntu. Graboid worked in both systems. I have now got rid of windows, upgraded to 10.10
I installed wine, winetricks & dotnet20, but when I click on my downloaded Graboid.exe file I get the following error:
Command line output code...
before installing Natty I shoved a whole bunch of files into a 29GB 7z archive (Split into 29 1GB archives.) Now when I try to extract them it gives me "An error occurred while loading the archive."Can anybody tell me how to rescue my stuff? (Or at least some of it.)Output from file roller below:
Code:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_GB.UTF-8,Utf16=on,HugeFiles=on,2 CPUs)
[code].....
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
I'm new to Ubuntu, and everytime i've tried to download a program like iTunes, the "Archive Manager" comes up and says "An Error Has Occured While Loading the Archive". how to fix this or download programs ?
View 7 Replies View RelatedI am new to the world of linux and when attempting to verify a tar archive I am displayed the following error. When running the command tar cvfW archivename.tar filename directoryname does not yield any errors.
View 1 Replies View RelatedI'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedWhenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.
View 2 Replies View RelatedI am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
I have 2 hard drives on mu box 1st one is 500.0 MB ext4 Volume where I have my syste FC 13 and a 2nd one where I put my database files as follows 78.1 GB ext4 Volume usage = filesystem, format ext4
ih file browser, I can see an icon for a 80GB hard drive but whenever I double click I get the following
Quote:
Error mounting volume: An error occured while performing an operation on data Partition 1 of ATA Maxtor <: <the operation failed
clicking details
Quote:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
when I type
Quote:
dmesg | tail
I get
Quote:
# dmesg | tail
[drm] nouveau 0000:01:00.0: Allocating FIFO number 3
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 3
[drm] nouveau 0000:01:00.0: Allocating FIFO number 4
What is very strange is that mysql works fine.In disk utility, it indicates that disk is healthy, but when I click check file system i get
File system check on "data" (Partition 1 of ATA MAXTOR STM380215A) completed File system is NOT clean
From four days each time I reload Synaptic, I got the following error:
Code:
W: Failed to fetch [URL]. Could not resolve 'repository.cairo-dock.org'
W: Failed to fetch [URL]. Could not resolve 'repository.cairo-dock.org'
W: Some index files failed to download, they have been ignored, or old ones used instead.
I can not understand what is it. Is it a temporary network problem? What I have to do?
When I start my system up(ubuntu 10.04) it gets to "ubuntu" loading animation then displays "An error occurred while mounting 0, Press S to skip mounting or M for manual recovery". I've read many threads and tried different things but nothing seems to be working!
heres my blkid output:
/dev/sda1: UUID="e1606c6e-e959-492d-824e-c0a8f0cd619b" TYPE="ext4"
/dev/sda5: UUID="d5492173-5794-46af-aa21-87abe18d571a" TYPE="swap"
I am running ubuntu 10.04 lts of a dell inspiron 600m I went to the update manager and updated all available updates after it was done I got this error in the update manager window: An error occurred The following details are provided: E: linux-image-2.6.32-26-generic: subprocess installed post-installation script returned error exit status 1
View 8 Replies View Relatedwhen iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
I can play CDs and DVDs but when I try to burn a music CD I get:
error while burning
an unknown error occurred
when the CD is finalising. As data has been written to the CD, but not finalised, each time I try I use another CD.
I've used Brasero and whatever the default burner in 9.10 is with the same result. If I boot in Win7 I can burn CDs.
seems im getting this error when i update.I searched the forums for similar errors but i found no solution that worked for me. this is the error>>>>>
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL]: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead
How do i get the correct key?
Havent got a clue why this started to happen recently, it says press S to skip or M to fix manually, i always skip adn everything is just fine, just would like to know why im getting this message and how to get rid of it
View 9 Replies View RelatedTrying to burn a DVD full of media and I keep getting errors on both above programs. Here is the error oupout I get from Brasero:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]......
Session error : An error occurred while writing to disc (brasero_burn_record brasero-burn.c:2862) Anyone know what I can do to fix this and get things up and running again? Would like to be burning to DVD's again. Running 11.04 and also had the same problem with 10.04.
My system is playing CD's fine but I just tried a DVD (non-BluRay) and I get that error! I have googled about and though I already had the ubuntu-restricted-packages I didn't have all the gstreamer0.10plugins-bad installed (as seems to be the recommended fix). I now have them and MoviePlayer still gives the same error. I also want BluRay's to be playable and I was investigating that when I thought I would check whether normal DVD's were still working (I'm not sure whether I've tried a DVD since I upgraded to MM). The DVD mounts ok and appears on my desktop with the title.
View 5 Replies View RelatedI just installed Ubuntu. I like it so far. After installing like 10 apps, I started getting this error: Quote: An unhandlable error occured There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at www...
[Code]...
I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
I have a backup of /oracle in redhat linux advance server 2.1,i have taken that backup by tar -cvzf command when untar this backup by tar -xvzf command the following error occurred-"Error exist delayed from previous error"
View 2 Replies View RelatedI tried to install last Ubuntu distribution (11.04) in a laptop that fits setup requirements. I downloaded de Iso, burnt on cd and restart the laptop with the cd inside it.The hard disk does not have any partition, it's empty, I suppose installation gives that opcion.At the begining of the installation, before any interactivity, I get this error:
View 2 Replies View RelatedI'd like to ask about archive mounter feature, can I mount zip file with read write mode? can gvfsd-archive do that?, or I must use fuse-zip to mount it? If I must use fuse-zip, how I wrap it so I can use it via nautilus or via gvfs-fuse-daemon
View 4 Replies View RelatedW: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic Release: The following signatures were invalid: NODATA 1 NODATA 2
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic-updates Release: The following signatures were invalid: NODATA 1 NODATA 2
W: GPG error: url karmic-backports Release: The following signatures were invalid: NODATA 1 NODATA 2
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/restricted/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch url...karmic/Release
W: Failed to fetch url/ubuntu/...pdates/Release
W: Failed to fetch url/ubuntu/...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
code....
W: Some index files failed to download, they have been ignored, or old ones used instead.
I can't understand wd the error in my way with my sources list (was trying to installError given when I try to update is: An unresolvable problem occurred while initializing the package information.lease report this bug against the 'update-manager' package and include the following error message:'E:Type 'src' is not known on line 2 in source list /etc/apt/sources.list.d/tiheum-equinox-maverick.list'Sources list is: ###### Ubuntu Main Reposdeb http://us.archive.ubuntu.com/ubuntu/ maverick main restricted universe multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ maverick main restricted universe
###### Ubuntu Update Repos
deb http://us.archive.ubuntu.com/ubuntu/ maverick-security main restricted universe multiverse
[code]....
My linux mint while booting shows an error: An error occurred while mounting /media/6092-594B. There are two options : Press S to skip mounting or M for manual recovery. I have tried press S, but nothing happens.
Showing that code:
fsck from util-linux-ng 2.17.2
/dev/sda7: clean, 366872/2943360 files, 9301096/11765248 blocks
init: unreadahead-other main process (843) terminated with status 4
init: unreadahead-other main process (848 ) terminated with status 4
mount: /media//6092-594B not mounted already, or bad option
[Code].....
I am facing the following error while running the newly installed software ZEKR. I have already installed the latest version of Java.
java.lang.UnsatisfiedLinkError: no pulse-java in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java :1681)
at java.lang.Runtime.loadLibrary0(Runtime.java:840)
[code].....
Just upgraded to 11.04 Natty Narwhal, and got myself a Samsung Galaxy S2. Tried connecting via USB in order to sync contacts, photos etc. Got the error: "Unable to mount SAMSUNG_Android Error initialising camera: -60: Could not lock the device" Wanted to use the USB storage and USB tethering, so I enabled USB debug mode. So did this on the phone: Settings > Applications > Development > USB Debugging Ubuntu can't see the phone. Then tried:
Settings > Wireless and Network > Tethering and Portable Hotspot Settings > USB Tethering.
Still no joy. Typing "lsusb" in terminal gives me:
[code]....
it sees it in lsusb, but nowhere else, so I still can't copy and sync etc. Anyone come across this problem, and if so, how were you able to solve it.