I recently downloaded and installed eternal lands. Everything went flawlessly until I went to run the program. I get an error:
The following is your error log contents. Note it is overwritten each time you run the game.
Log started at 2010-11-04 10:26:26 localtime (EDT)
This was the program output: Note it is overwritten each time you run the game.
Is there anyone that has had this error, and no a fix for it.
I ran a script to install eternal lands. So How do I uninstall it. Here is the script
#! /usr/bin/env bash
# Instructions to use:
# Download to, for example, your desktop then right click and select "Properties".
# From the "Permissions" tab, set the execute flag then click "Close".
[Code].....
It just goes to a file I have no idea where?
View 2 Replies View RelatedHow do I know that if I used a command apt-get install vim-full which packages it downloaded and which packages were instlled on Debian.
View 6 Replies View RelatedInterested in trialing Varkon and used Synaptic Package Manager to download and install. According to the [url]...nstalling.html it should be there under 'Applications'. I've looked through them all and no sign of Varkon. I've also tried to see if Varkon was installed so I looked via Ubuntu Software Center under installed software. No sign. Did a file search for Varkon.
View 4 Replies View RelatedI recently installed Ubuntu 9.04 off of a disc and it worked perfectly, however after I downloaded and installed the system updates from the update manager, it stopped working and it won't even see my device. I have a Zonenet ZEW2500 USB wireless adapter.
View 1 Replies View RelatedI want to install net-snmp-utils-5.3.1-14.el5.i386.rpm rpm using the command "yum install net-snmp-utils-5.3.1-14.el5.i386.rpm
Now, once yum installs this rpm, how can i copy all these downloaded rpm (and dependencies rpm)? So that i can use these downloaded rpms if i want to install them as a fresh or to copy and install on another computer.
after the netinst finished to download the last package, one hour later the process never continues, I checked the log file and I didn't find anything suspecious, also dmesg and nothing, in fact, in the log file before checked I found that the last line was registered just a minute ago - DHCP renew IP-, so my questions are:
1. all the packages downloaded are gone?, can I restart the installation using all those packages downloaded?
2. where I can find the error or problem that cause that the installation was freezed?
3. in the case that installation needs to start from the beginning, can I use the package downloaded?
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
[code]...
How do I fix this?
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
I am getting some error when i compile cross compile "dbus-1.2.20". error Code: checking for XML_ParserCreate_MM in -lexpat... no configure: error: Could not find expat.h, check config.log for failed attempts so i downloaded te expat library sources i cross compiled. But again i am getting same error. I think i have to add "-lexpat" in LDFLAG. But i dont know how to do that.
View 1 Replies View RelatedI am trying to update Fedora 12 but I always get this error.
Error Type: <class 'yum.Errors.RepoError'>Error Value: Error getting repository data for installed, repository not found File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main() File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
[Code]...
just installed a fresh copy of fedora 12 and getting this error when trying to update the system.
Code:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
Running System>Adminstration>Software Udates, I get the following errors
[code]...
Similarly, if I click on System>Add/Remove Software>Package Collections, I get No groups could be found. A cache refresh should fix this. I don't see how to do a cache refresh. I tried rpm --rebuilddb, which didn't do any good and um clean all which also did no good. I did manage to do the updates with yum updates But I don't want to have to use yum at the command line all the time to do updates.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
when i try to install tk using the command
Quote:
dpkg --install tk*.deb
i get the following error
Quote:
(Reading database ... 123410 files and directories currently installed.)
Preparing to replace tk8.4 8.4.12-1 (using tk8.4_8.4.12-1_i386.deb) ...
Unpacking replacement tk8.4 ...
Preparing to replace tk8.4-dev 8.4.12-1 (using tk8.4-dev_8.4.12-1_i386.deb) ...
Unpacking replacement tk8.4-dev ...
code....
ASAP im much worried about this as it relates to my project.
I decided to fully install Ubuntu 9.10 on my computer Using Entire Disk Space. Installation was completed without any problems so I followed the instructions, Rebooted and took the CD out of the mechanic. After rebooting, when the GRUB was loading, it said the following
Error: no such device: 235ea02c-16b5-4abf-af04-af6767b6848f
I tried rebooting several times, even with CD inside. All it did was it moved to choice of System (normal, safe mode, memory check etc...). When I chose Normal, it just refreshed and did not get me anywhere. The same goes for the safe mode. After a certain while I decided to replace it with 10.04. However, this one stopped at 79% saying sth like Retrieving Data *number* of *number*.
It lasted for too long so I rebooted again, now with 9.10 CD inside again. I installed 9.10 hoping that this time it would work the way it should. However, the exact same thing happend. Installation went smoothly but GRUB booting had that error. Now there is Ubuntu 9.10 on my HDD which would not start so I'm writing this using the "10.04 Tryout".
I've been creating a website of late, and I've decided that I've come far enough along to get actual web development software (though gedit has served well). In Gnome, I have Bluefish, which is alright, but I also wanted something for KDE, since I also have Kubuntu 10.04 installed. I did some reading, and decided to see what all the fuss about Quanta Plus was about. I download the tar file, extract it, but when I run ./configure, it goes through a couple of steps and everything seems to be checking out okay.
Then I get an error message that says I am missing kde-config, and that I should check my KDE installation. I didn't do anything abnormal during the Kubuntu installation, so I can't imagine what I could do to check that installation. So then I go tot the INSTALL file, and try the alternative installation ./configure method, and I get an error message that says the the C compiler can't output an executable.
I just installed BURG and the installationguide told med to run sudo update-burg. When I do that, I get this message: /etc/default/burg: 7: Syntax error: "(" unexpected
On another page, in the comments, I found out that deleting a line in the /etc/default/burg can fix it. But my problem is that I don't now which line.
My guess is about line number seven, but as I'm saying, I'm not sure.
Here are the document:
I'm trying to compile a file with the following line :
Code: gcc lesson2.c -o lesson2 -I /usr/X11R6/include/ -L /usr/lib/ -L/usr/X11R6/lib/ -L /usr/X11R6/lib64/ -lglut -lGL -lGLU -lX11 -lXmu -lm But i got the error : /usr/bin/ld: cannot find -lXmu
I'm using this to compile a simple OpenGL file, and if I remove lxmu (and lxi, wiche gives me the same error), it got the all clear, but when I tun my program, I got an "Segmentation fault" error (I think because of the missing librairies)... When I did a locate libXmu :
[Code]...
I have insatalled Kubuntu using wubi (in windows). But when I am running Kubuntu it is showing the following error.
try(hd0,0) : FAT16 : NO WUBLDIR
try(hd0,1) : NTFS35 : NO wubldir
try(hd0,3) : NTFS35 :
What should I do???
I've been serching the forum for hours and every thread related to "GRUB error: no such partition" that i've read relates to fixing the issue for users with windows OS also installed or trying to get windows to boot.
How it happened: I edited partitions and now I get GRUB error: no such partition. I ONLY have Linux installed.
I was able to boot the OS by typing:
Code:
set partition=(hd0,1)/boot/grub
set root=(hd0,1)
insmod normal
normal
[Code].....
I am installed cUrl from http://packages.ubuntu.com/lucid/amd64/curl/download for my ubuntu 9.0 with php 5.2 ,Apache 2.0.It was installed by gkebi package installer. but when i display phpinfo() curl not found since i was attempt to use phptwitter class. what is the proble i have? When i am trying to install again package installer shows same version of curl already found, but phptwitterclass shows following error 'Method "curlQuery" of class "Twitter" reported an error: CURL library not installed.'
View 1 Replies View RelatedI had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
Traceback (most recent call last):
I have checked the known issues and the sticky post, it does not seem to be related. I have Ubuntu as my host OS and I want to run Windows as a guest.
Now, Here is the error:
Quote:
Kernel driver not installed (rc=-190
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. I have done the obvious:
Quote:
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install dkms
sudo /etc/init.d/vboxdrv setup
I still have the same error. I just updated from Ubuntu 10.04 to 10.10, then I was prompted by virtual box to update to the newest version, then this happened.
Iv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedI have installed ubuntu 11.04 using wubi with Windows Vista Home Premium 32 bit. The operating system works fine. Althoughwhen I boot and choose linux I get an error message during boot which stays forever. I have to shut down using power button and start again when it boots fine.
Another problem is when I restart from ubuntu it restarts back to the desktop but when I shut down, it does not shut down the computer. Stays on with blank screen forever. I am attaching the image of latest error I received on boot.
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies View Related