Ubuntu :: 10.04 - KDE Not Installed Correctly (Error Message)
May 24, 2011
I've been creating a website of late, and I've decided that I've come far enough along to get actual web development software (though gedit has served well). In Gnome, I have Bluefish, which is alright, but I also wanted something for KDE, since I also have Kubuntu 10.04 installed. I did some reading, and decided to see what all the fuss about Quanta Plus was about. I download the tar file, extract it, but when I run ./configure, it goes through a couple of steps and everything seems to be checking out okay.
Then I get an error message that says I am missing kde-config, and that I should check my KDE installation. I didn't do anything abnormal during the Kubuntu installation, so I can't imagine what I could do to check that installation. So then I go tot the INSTALL file, and try the alternative installation ./configure method, and I get an error message that says the the C compiler can't output an executable.
View 2 Replies
ADVERTISEMENT
Aug 18, 2011
error message says "configuration defaults for GNOME power manager has not been installed correctly";however, my laptop was working fine this morning. Now it does not even let me sign-in. I was attempting to install a back-up software using the "Accessories" button icon and the computer stopped working. Now it won't let me even sign-in.I use Ubuntu 10.04 and had done an update successfully (or so I thought), but what do I do now?
This message is coming to you from my desktop computer while the problem exists on the Dell laptop. Its model number is Inspiron 9300.
View 2 Replies
View Related
Feb 15, 2010
My level is starter with Ubuntu. Moderate experience with C.Problem starting with programming in C under Ubuntu.I have installed Anjuta IDE and made this classical program.
#include "stdio.h"
main()
{
[code]....
View 2 Replies
View Related
Dec 14, 2010
Iv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
Aug 8, 2010
I installed Azureus from their site. It works well. The only problem is when Azureus tries to apply updates, I get this error message:
"The folder <path-where-I-installed-Vuze> is not writable. This will prevent future software updates from being applied."
There was a link the the Vuze wiki, and the problem is that I (or is it the Azureus updater?) do not have permissions to write to that directory, or words to that effect.
How do I apply the proper permissions so that when an update from Azureus is downloaded, it is applied?
The wiki offers this solution:
Quote:
But this looks like something that I have to do manually, each time...
How do I set it up, so that the updater has the permissions and uses the proper password to do it automatically, when I restart Vuze?
I'm using Ubuntu 9.10
View 6 Replies
View Related
Aug 22, 2014
Installed Wheezy. Audio players either stop with an error message about no sound, or they quietly play silence. Tried with gui and comand-line versions.
Mucking about with lspci indicates that I have two sound cards. News to me. I try "lspci | grep -i audio" and get
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
View 9 Replies
View Related
May 5, 2010
I tried compiling a simple Hello World with gcc but didn't have any luck. I got this message: Code: junk.c:1:19: error: stdio.h: No such file or directory gcc was installed and configured correctly at one point but I think I changed the the .bash_profile since then. I checked where stdio.h lives. The path is:
[Code]....
View 2 Replies
View Related
Mar 4, 2010
Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
View 3 Replies
View Related
Jul 17, 2011
After doing software updates my system had to be rebooted after a kernel update, but when I checked in grub and using $ uname -r it reported that I was using 2.6.38-8-generic. Now ever time I install a program from the software centre it says that software can not be installed and gives me these details. I am using Ubuntu 11.04 in unity.
View 3 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Apr 22, 2011
Installed ubuntu 10.10 on my dell D600. Install went fine, but after updates, the initial startup sound disappeared. Also had a bit of an issue getting the wireless card to work, eventually found the answer in the debian wiki and got the legacy installer for the b4X broadcomn chipset. Since then, everytime i install something, the system tells me the package was not installed correctly, but it does appear to install, except the stellarium.
View 1 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Jun 6, 2011
I cannot access ubuntu anymore. I have ubuntu 10.04LTS Lucid Lynx. Ubuntu always prompts me to do updates. On the last update, the system wasn't able to find 4 files online. So it aborted the update and reverted to the previous state. On the next startup I could still access ubuntu. But the startup after that I got the inlog-screen (with username and password), and even with the correct username and password that's as far as it goes. In the lower right corner it says:
Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly contact your administrator. What can I do to access ubuntu again? I can, when I reboot, start up in recovery mode (but I have no clue what to do with the prompt). I can also start up older 'kernels': kernel 2.6.32-30-generic, 2.6.32-29-generic, 2.6.32-28-generic, 2.6.32-24-generic. Each of them also has a recovery mode. Not sure if this is useful at all though. Laptop: AMD Turion(tm) 64 Mobile Technology MT-37, 1.99 GHz, 1,00 GB RAM.
View 6 Replies
View Related
Jul 6, 2011
I've installed CFEngine from source (for those of you who aren't familiar with the product, check out the wiki page) on an AIX server. I had some issues setting it up but finally got it to gmake successfully.
Once I run gmake install I get a very short output (based on other source builds) and no errors. I figure something is fishy and I now I need to figure out a good way to find if it was correctly installed. I tried:
find / -name cfeng* 2> /dev/null
Is there something analogous to rpm -qa | grep cfengine?
Here is a copy of my output in case anyone needs: [url]
View 1 Replies
View Related
Jun 12, 2010
CentOS 5 on a DSEB-DG motherboard. I am having trouble communicating with my APC UPS on /dev/ttyS0.
What I do know: UPS and cables are ok they work ok on my other server CentOS on a Intel S3210SH M/B Comparing the serial ports in the Hardware browser I notice that the Working system (Intel) is listed as such
Code:
The non working system lists
Code:
So I can see why the system does not work.
What I do NOT know: How can I correct this problem. Do I need to re-install the drivers? if so HOW.
View 1 Replies
View Related
Oct 31, 2010
I need to install linux-pam on 13.1, pam is finicky and you can really screw up your system with it. getting pam installed and operating correctly on a slackware system?
View 10 Replies
View Related
Jun 2, 2010
I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System -> Administration -> Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong?
Some information about my system:
iwconfig
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wifi0 no wireless extensions.
ath0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
[Code].....
I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck
View 1 Replies
View Related
Oct 10, 2010
I was using simple backup config to backup home to an external drive and it was working fine for the past week or so and today after the backup the computer was restarted and I am unable to log on. I get an error message saying. "the configuration defaults for gnome power manager have not been installed correctly "
I did some googling and the problem is that / is full. I have been trying for the past three hours to delete some space on / so that I can log on. I used ctr-alt-f1 and I can log on there but whatever command I use to delete the root trash it fails. I get an error message saying /root/.local/share/Trash/files/ is not a file or directory.
delete root trash so I can log onto this computer. I have used every variant of sudo rm -r /root/.local/share/Trash/files/ that I could find including one using Chmod. I have already tried the commands found in this tutorial [URL]
I also reinstalled gnome but that did nothing.
View 4 Replies
View Related
Feb 27, 2011
I just tried to start up Ubuntu and got the following error message. "The configuration deaults for gnome power manager have not been installed correctly. Please contact your computer administrator."
I then get a black screen, with the menu bar at the bottom, and a choice of who to log in as. No matter who I choose I get the same error message and then it takes me back to the same screen. It also gives me the choice of what session to use but again, no matter what I choose it just takes me back to the error message and the same screen. I am running Ubuntu 10.10 on an Eeepc 901. I have the Netbook version installed, but I was using the desktop session. The last time my computer worked I ran update manager and it updated some Intel driver i think. Sorry I can't remember the exact details. Not sure if this is something to do with it.
View 1 Replies
View Related
Jul 17, 2009
Recently when I booted up my computer I get an error at the login screen.
"Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
When I try to login in, nothing happens. I cant seem to get past the login screen.
View 11 Replies
View Related
Apr 3, 2010
how to check linux operating system is completely and correctly installed with all drivers.
View 6 Replies
View Related
Nov 11, 2009
I'm running 10/11 on a toshiba satellite. i kinda got tired of loosing stuff because i mis-timed the battery discharge, so some months ago i pulled the battery and just ran on the adapter (back ground, i don't know if it's nothing, related to, or caused the problem).
monday morning fired her up - boom got the power "gnome manager not installed correctly"message. tuesday, googled gnome then power then... you get the route, and found Fedoraforum.org, read the stuff, did the yum remove...., did the yum install.... everthing seemed cool. 2nd reboot she stopped at the "f/infinity/balloon" kinda logo.
i went to verbose startup and - all sorts of services were failing; the word deprecate(d, ing, tion) came up a lot "device full..." came up a fair bit as well. when i tried the "yum remove" approach again i got [rpmdb: write: 0x1fd48b0, 8192: No space left on device]. similarily on "yum install" same kinda stuff - deprecation, BaseExpection, deprecated..... kinda long winded. up till now (13 years)
View 14 Replies
View Related
Mar 11, 2010
i have a problem i have two ubuntu programs on my hard drive. i have old 9.4 and i installed new 9.10 in a partition. i was unable to get old 9.4 to work correctly and i installed new in fear of looseing pics and files. what do i do.
View 7 Replies
View Related
Jul 16, 2011
My ubuntu isnt working after i write my password and press enter it does nothig but gives a massage ''the configuration defaults for GNOME power manager have not been installed correctly'' the recovery console doesnt work too(same problem) the problem appeared after i installed bittorent client called smth starting with 'd'.
View 4 Replies
View Related
Dec 17, 2010
Opps should raed GNOME power manager problem, but im sure you all guessed.I get an error when i try and log in.The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."I did try and follow the advice on other threads but nothing works so far.
I have an eepc- no cdrom drive.Right now im in malaysia so i dont have anyone to help me out. If you have any suggestions make them simple please i dont care if i loose everything on my computer just need it to work again
View 5 Replies
View Related
Oct 30, 2010
What it does is, if you do something to change anything on the screen, for example, highlighting text, or switching from one tab/menu in an application to another. The screen doesn't show the change. The only way to SEE the change is to do something else to the screen, like grabbing and moving the application around, or scrolling the page of a website, etc. If you don't do that, you won't see what's really on the screen, but rather what WAS on the screen.
Another example:
*) say you have an application open with 3 tabs: tab1, tab2, and tab3.
*) Switch from tab1 to tab2 and you see no change on the screen.
*) Switch from tab2 to tab3 and you see tab 2 on the screen, NOT tab 3.
*) Switch from tab3 to tab 2 and you see tab3 on the screen, and NOT tab2.
Or, if you're typing in this box to make a post, and you hit ctrl+a to select all, you see no change. If you click in the box to deselect all, then it looks like you've selected all text still. The only way to see what's currently on the screen is to scroll the text box or page just a bit, or, if you're using an application, then you'd have to move it around on the screen a bit.
As i've said, the nVidia drivers are installed and working, as well as compiz, etc.
Code:
[=v=]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02)
00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)
[Code]....
Also, i did BOTH the dracut thing, and the extra kernel paramter in the grub.conf. So, nouveau is blacklisted. Oddly enough though, i do NOT have this problem when using the nouveau driver...
Also, fwiw, i think that i should mention that i'm not using the "Desktop Settings > Enable Desktop Effects" method, because i always seem to have problems with getting certain features to work, like the background for the cube skydome, etc. How i do it is that i install a package called compiz-manager, and i have it set to run at session start. This makes all of the compiz features work fine. One thing that i've noticed though, is that on my other workstation, i haven't set that up yet, and it seems that is is NOT having the same issue. While compiz-manager was running, i tried to use the "desktop settings" method, and it crapped out and reverted back to the old school desktop. I then tried it again, and it reloaded compiz, and there is no screen update issues now. So it seems that you have to have both of them running in order to get all of the compiz options to work, and not have the screen refresh issue?
View 9 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
