i want deluged and deluge-web started at boot but not under root. So that all downloaded files are owned by not root, but user sm I made a script /etc/init.d/m
Code:
#! /bin/sh
# /etc/init.d/m
case "$1" in
[code]....
but it doesn't start, why?
I was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View Relatedwhen I try to do admin tasks - e.g. setting my wireless connection to "available to all users" or updating a group's settings - it asks for "password for root" rather than asking for my password so it can sudo.I was forced to enable the root password, so I could do anything on my system ( sudo su; passwd; ) but I'd rather keep my root password locked and use sudo if possible.
View 4 Replies View RelatedI've been trying to get some help with a problem I'm having in Deluge. I started on the Deluge forums but am not really getting much help, so I figured I'd post here and see if maybe someone has an idea of what's going on. code...
I'm running Deluged and using the Web Interface. I start the computer up and download the first Torrent (or set of Torrents) fine. After they're done, if I add any more Torrents then it won't transfer them at all. It shows no Seeders. Peers go up and down like they're trying to connect but losing connection. 20-45 minutes later, it starts downloading. Until I updated to the PPA version, it would download slowly but after updating now it downloads full speed. If I kill Deluged (Rather than waiting a possible 45+ min for it to start) then it starts downloading at full speed right away.
I have 2 email accounts set up in Thunderbird - one is gmail and the other was given me by our server admins few years ago. Everything works fine on windows but when I try to send something from the second account (not gmail) in ubuntu it says that password is incorrect. Ive double checked all settings and seems like everything set correct. Now the most interesting part: when I set up this account as root (gksu thunderbird and then do same as I did under my account) everything works perfect.
I found only one thread at this forum with same issue and sure it's not solved [URL]..
I am wondering (in the light of all 11.3 problems I am having) When I start yast2 (as root) it works but I always get the message
No index for key: "Name" value: "" on the xterm
I need to kill a process which has been started by user2 if I am user1 without being sudoers or using root.Do you know if there is a way of setting that when launching the process? Such as a list of users allowed to kill the process?
View 7 Replies View RelatedI have a startup script placed in /etc/init.d wherein I make the following call:
nohup sudo -u myuser $CATALINA_HOME/bin/startup.sh 2>&1
This causes Tomcat to be run as myuser, which is expected. However after issuing the reboot command the system starts up and root is now the owner of this process. How can I force the process to be started off as myuser on reboot?
I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use
startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx
I have never touched Linux. Always been intrigued, but never toyed around with it until now. So please bear with me. I normally run Windows 7 Pro but would like to dual boot Ubuntu. I have installed Ubuntu 11.4 with Wubi 4-5 times, and it starts out fine, and then stops working on me. I tried recreating it to see what was causing the problem, but with no avail. The problem it has is as soon as I pick Ubuntu from the GRUB it boots to some sort of bootup (non GUI) and gets to a point where it says something about a system audit, and never loads from there. The only way to fix it is to uninstall Ubuntu (through Add/Remove Programs) and reinstall.
I am not in a place where I can partition drives or anything like that. I do not care so much about using Wubi, but either that, or help booting from a USB would work fine for my needs.
I am running Ubuntu 9.10, and every time the computer starts, cups does not appear to be running. I have to run the following from the command line:
Code:
sudo /etc/init.d/cups start
After cups is started, printing works fine. Does anyone know how I can get cups to start on it's own when the computer boots?
I'm working from the set of Debian instructions following this post. I have saved the correct image file to my USB flash drive per the instructions for Intel x86. I've got a Celeron HP, 512 RAM, 1.3 Ghz processor, XP Home SP3. After saving file to USB flash drive, I extract file and a single boot file then appears next to zip folder. I tried extracting by command: # zcat boot.img.gz > /dev/sdX and that does not work; not recognized or something (I'm going from memory). Command line is C:/User/Docs and Settings or such, no option for G: drive in Command line, if that helps. I am no Command line pro. Got there by Accessories/ Command line. (Is this the same thing as Start/Run/msconfig, dnsflush etc?)So since I can't extract with Command line it follows that the "mount" instructions don't work for me either: mount /dev/sdX /mnt. So I just re-booted with USB drive in, and pressed Del and Esc alternately like a madman for about 5 boots, but does not open in BIOS; instead Windows opens normally.
I know my way around a little PHP/MySQL/Javascript libraries, but if the Linux world is this difficult at the outset, I can only imagine the nightmare I'm in for if I succeed in getting my system converted--which is what I would want to do--not set up partitions, etc. There is an all-in-one file hd-media/boot.img.gz which contains all the installer files (including the kernel) as well as syslinux and its configuration file.Note that, although convenient, this method does have one major disadvantage: the logical size of the device will be limited to 256 MB, even if the capacity of the USB stick is larger. You will need to repartition the USB stick and create new file systems to get its full capacity back if you ever want to use it for some different purpose. A second disadvantage is that you cannot copy a full CD image onto the USB stick, but only the smaller businesscard or netinst CD images.After that, mount the USB memory stick (mount /dev/sdX /mnt), which will now have a FAT filesystem on it, and copy a Debian netinst or businesscard ISO image to it. Unmount the stick (umount /mnt) and you are done.
Installed Truecrypt onto openSUSE 11.3 (KDE) and noticed that Truecrypt needed to be started as root.Modified visudo using YAST asusername ALL = NOPASSWD: /usr/bin/truecryptHowever, when copying files from my backup drive into the Truecrypt partition, there is an access problem (couldn't remember actual error message)In Konsole , updated visudo to username ALL = (ALL) NOPASSWD: /usr/bin/truecrypt Copying is allowed and working fine.Question:1. What is the difference between the above two visudo setting?2. How to updated visudo to the second setting in YAST?3. How to change the editor for visudo in konsole using nano instead of vi?
View 1 Replies View RelatedSometime back my Nvidia card blew up and I had to order a new one -problem was I had to run in Failsave graphics. If you have not change /etc/X11/xorg.conf and have not install any graphics drivers,
[Code]...
I started in Failsave graphics each fresh boot. New Nvidia card arrived today and installed but I cannot loaded the drivers. System/Admin/Additional Drivers tells me I have the Recommended Driver installed but when I go System/Admin/Nvidia Server Settings I'm informed You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. I open terminal as root and type nvidia-xconfig and I get:
[Code]...
I remember a friend of mine was able to get my computer to boot under CUI, and the command 'start x' started the GUI. with booting up my computer through CUI.
View 3 Replies View RelatedI have created a Radius startup script in /etc/init.d for Debian which looks like this:
Now this works but when I boot my server it shows as ready to process requests and it doesnt login. I cant get a login prompt. If I do a CTRL C to try close this it doesnt work and just shows CTRL C on the screen, I can type in kill radius but nothing happens.
I guess its because my script is in debugging mode, most of the suggestions for a script said I should use:
However the radiusd a doesnt work and if I try to run using command radiusd in it comes up and says invalid command and I dont have the option to use
So if this script runs on my server, I could connect to the server through a putty session via port 22 and log on fine and do what I need too, but if I try to connect to the server directly after boot its just sitting on ready to process requests and I cannot do anything when directly at the server. On one particular server I didnt have the network confg right so I couldnt putty to it and now Im a bit stuck. Will I need to rebuild my server? As I canït break out of this ready to process requests and I cannot login as its just sitting there, I have tried connecting through serial management via my laptop but I cant do anything this way either the only way I could do anything was if I could get through to the server on putty.
There must be a way when directly at the server to cancel the radius and get logged in? As Ive mentioned CTRL C doesnt work. I can get to the ok prompt but not sure what command to use and if I could change the network config at the ok prompt or if I could somehow cancel the startup script at the ok prompt? I thought I could use the init commands to start the server without the script starting but the init commands don�t work and the server just sits there.
Also I guess I shouldnt be using radius X in my startup script, to prevent this problem is there something else I should be using? I tried using radius x (the small x) and I hit enter and then no process for radius starts .
I've managed to install Deluge with webui using this link
[url]
Everything was fine and i did manage to connect to it
BUT it says not connected
Does it have anything to do with ports?
How do I install deluge? This is the first thing ive tried to do... So far ive typed in my password 10-15 times, typed in commands in the terminal.... and still NADA.
View 6 Replies View RelatedI am running a linux server with Ubuntu 10.04. It runs a deluge daemon. Deluge 1.2.2 with python 2.6. I have the client running in Ubuntu 11.04.
The problem is, some of the plugins require python 2.6 while I have 2.7. After some digging I have found that 11.04 supports and has installed python 2.6 /usr/bin/python2.6
I have edited all the deluge files
Code:
/usr/local/bin/deluge
/usr/local/bin/deluge-gtk
/usr/local/bin/deluge-console
[Code].....
Recently, Deluge has not been starting up for me. The Window opens, but remains completely blank, and then grays out (as if unresponsive). I tried running it from terminal and got this in return..
Code:
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
[code]....
Ive got a dedicated server setup to run the deluge daemon and access it through thee webui. i can add and even delete new torrents just fine but when i go into the options and try to change values like upload speed limits etc the changes dont take. im assuming this is a permissions issue but i don't know what files or directories to change.
View 1 Replies View Relatedwhenever i have started "deluge" (a bittorrent client), my laptop simply freeezes within 5 minutes. Its something I haven't seen before ever with Ubuntu - the keyboard/mouse stops responding, and the CAPS-LOCK key starts blinking...and there's NO way to get the system back without a hard reboot
Another thing...I've noticed a zombie process called "netns" running which I suspect to be causing this - its always taking the pid 13, and its impossible to kill - I tried using kill, killall, pkill from su prompt, and it didn't go away at all !!
If there's anyway I can send logs/dumps for analysis to ubuntu team, how to do so and i'll do the needful to get them...
My ISP specifies a time between 2 - 8 am for free upload /download
I would like to stop deluge using crontab at a specified time. How do i do this?
also even poweroffing the system would do..i tried adding a simple poweroff command in crontab under both user and root but it didnt work?
using xubuntu 10.10 and crontab...also have gnome-scheduler installed
I'm trying to connect the Deluge GTK UI to the daemon running on the same system. This worked just fine previously, but for no apparent reason I can't connect now. I have Deluge set to autoconnect on startup, but it doesn't. If I open the connection manager, it says the daemon isn't running (which isn't true; I checked), and trying to start or connect to the daemon from there does nothing.I get the following errors from deluge:
Code:
[ERROR ] 16:12:11 gtkui:343 Connection to host failed..
[ERROR ] 16:12:32 gtkui:343 Connection to host failed..
[code]....
I've just setup a virtual Ubuntu 10.10 machine on my server running Deluge and WebUI. The WebUI seems to work fine, but if I upload a torrent with a total size over 2Gb I just get an 'error' as soon as the torrent is run.The download folder is a CIFS share to a NAS (Acer Altos EasyStore) folder, I can download torrents that are less than 2Gb in total without any problems.I can read/write large files from the command line or Nautilus but any torrent uploaded to Deluge larger than 2Gb is flagged as 'error' as soon as it is run (with no actual error listed in the torrent details).
View 1 Replies View RelatedI've been having a problem with Deluge ever since upgrading to Natty. The problem is, it doesn't open anymore. I have the deluge-team ppa's set up and I tried completely uninstalling and reinstalling the program, but this did nothing. When I try running Deluge via the terminal using "deluge-gtk", I get this error:
[Code]....
my torrents upload fine when they are peers, but as soon as they finish and become seed's they stop working. they haven't uploaded a single time since becoming seeds.
View 6 Replies View RelatedWhenever Ubuntu tries to update itself or if I initiate an update I can install every but Deluge's update.I get the following:
AN ERROR HAS OCCURE:
E: /var/cache/apt/archives/deluge-common_1.2.0-2~karmic~ppa1_all.deb: trying to overwrite '/usr/share/pyshared/deluge-1.2.0.egg-info/dependency_links.txt', which is also in package deluge-core 0
What does this mean? It suggests filtering broken to fix it. I do so and mark deluge for reinstallation but it doesn't seem to solve anything.
Im trying to install a program off of the internet and i cannot figure it out. i need to install an updated version of deluge, the updated version is not in the ubuntu catalog yet. so here is the process i went through.
1) went to deluges site, clicked download version 1.2.1 on homepage.
2) went to ubuntu category and chose: "The Deluge packages in Ubuntu:"
3) went to the exact hits category and chose the lucid 1.2.1 version of deluge.
4) went to bottom of page and under "download deluge" and clicked the link
5) chose one of the north america choices
6) chose to open with GDebi Package Installer (default)
7) gave me this error in red letters at top : Error: Dependency is not satisfiable: deluge-gtk (= 1.2.0-1)
I don't know what exactly I did to wreck the functionality but something did Deluge in. I've purged the configuration files and libraries and reinstalled them three times over and every time in terminal that I start it using deluge-gtk I get the following output:
Code:
ryan@ryan-PC-Ubuntu:~$ deluge-gtk
Traceback (most recent call last):
File "/usr/bin/deluge-gtk", line 9, in <module>
load_entry_point('deluge==1.2.2', 'console_scripts', 'deluge-gtk')()
[code]....