I've managed to install Deluge with webui using this link
[url]
Everything was fine and i did manage to connect to it
BUT it says not connected
Does it have anything to do with ports?
I was seeding a folder with deluge and when I removed the file from deluge I chose remove data by mistake, so can I recover my folder?
View 4 Replies View RelatedHow do I install deluge? This is the first thing ive tried to do... So far ive typed in my password 10-15 times, typed in commands in the terminal.... and still NADA.
View 6 Replies View RelatedI am running a linux server with Ubuntu 10.04. It runs a deluge daemon. Deluge 1.2.2 with python 2.6. I have the client running in Ubuntu 11.04.
The problem is, some of the plugins require python 2.6 while I have 2.7. After some digging I have found that 11.04 supports and has installed python 2.6 /usr/bin/python2.6
I have edited all the deluge files
Code:
/usr/local/bin/deluge
/usr/local/bin/deluge-gtk
/usr/local/bin/deluge-console
[Code].....
Recently, Deluge has not been starting up for me. The Window opens, but remains completely blank, and then grays out (as if unresponsive). I tried running it from terminal and got this in return..
Code:
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
(deluge:21099): Gtk-WARNING **: Unable to locate theme engine in module_path: "aurora",
[code]....
Ive got a dedicated server setup to run the deluge daemon and access it through thee webui. i can add and even delete new torrents just fine but when i go into the options and try to change values like upload speed limits etc the changes dont take. im assuming this is a permissions issue but i don't know what files or directories to change.
View 1 Replies View Relatedwhenever i have started "deluge" (a bittorrent client), my laptop simply freeezes within 5 minutes. Its something I haven't seen before ever with Ubuntu - the keyboard/mouse stops responding, and the CAPS-LOCK key starts blinking...and there's NO way to get the system back without a hard reboot
Another thing...I've noticed a zombie process called "netns" running which I suspect to be causing this - its always taking the pid 13, and its impossible to kill - I tried using kill, killall, pkill from su prompt, and it didn't go away at all !!
If there's anyway I can send logs/dumps for analysis to ubuntu team, how to do so and i'll do the needful to get them...
My ISP specifies a time between 2 - 8 am for free upload /download
I would like to stop deluge using crontab at a specified time. How do i do this?
also even poweroffing the system would do..i tried adding a simple poweroff command in crontab under both user and root but it didnt work?
using xubuntu 10.10 and crontab...also have gnome-scheduler installed
I'm trying to connect the Deluge GTK UI to the daemon running on the same system. This worked just fine previously, but for no apparent reason I can't connect now. I have Deluge set to autoconnect on startup, but it doesn't. If I open the connection manager, it says the daemon isn't running (which isn't true; I checked), and trying to start or connect to the daemon from there does nothing.I get the following errors from deluge:
Code:
[ERROR ] 16:12:11 gtkui:343 Connection to host failed..
[ERROR ] 16:12:32 gtkui:343 Connection to host failed..
[code]....
I've just setup a virtual Ubuntu 10.10 machine on my server running Deluge and WebUI. The WebUI seems to work fine, but if I upload a torrent with a total size over 2Gb I just get an 'error' as soon as the torrent is run.The download folder is a CIFS share to a NAS (Acer Altos EasyStore) folder, I can download torrents that are less than 2Gb in total without any problems.I can read/write large files from the command line or Nautilus but any torrent uploaded to Deluge larger than 2Gb is flagged as 'error' as soon as it is run (with no actual error listed in the torrent details).
View 1 Replies View RelatedI've been having a problem with Deluge ever since upgrading to Natty. The problem is, it doesn't open anymore. I have the deluge-team ppa's set up and I tried completely uninstalling and reinstalling the program, but this did nothing. When I try running Deluge via the terminal using "deluge-gtk", I get this error:
[Code]....
my torrents upload fine when they are peers, but as soon as they finish and become seed's they stop working. they haven't uploaded a single time since becoming seeds.
View 6 Replies View RelatedWhenever Ubuntu tries to update itself or if I initiate an update I can install every but Deluge's update.I get the following:
AN ERROR HAS OCCURE:
E: /var/cache/apt/archives/deluge-common_1.2.0-2~karmic~ppa1_all.deb: trying to overwrite '/usr/share/pyshared/deluge-1.2.0.egg-info/dependency_links.txt', which is also in package deluge-core 0
What does this mean? It suggests filtering broken to fix it. I do so and mark deluge for reinstallation but it doesn't seem to solve anything.
Im trying to install a program off of the internet and i cannot figure it out. i need to install an updated version of deluge, the updated version is not in the ubuntu catalog yet. so here is the process i went through.
1) went to deluges site, clicked download version 1.2.1 on homepage.
2) went to ubuntu category and chose: "The Deluge packages in Ubuntu:"
3) went to the exact hits category and chose the lucid 1.2.1 version of deluge.
4) went to bottom of page and under "download deluge" and clicked the link
5) chose one of the north america choices
6) chose to open with GDebi Package Installer (default)
7) gave me this error in red letters at top : Error: Dependency is not satisfiable: deluge-gtk (= 1.2.0-1)
I don't know what exactly I did to wreck the functionality but something did Deluge in. I've purged the configuration files and libraries and reinstalled them three times over and every time in terminal that I start it using deluge-gtk I get the following output:
Code:
ryan@ryan-PC-Ubuntu:~$ deluge-gtk
Traceback (most recent call last):
File "/usr/bin/deluge-gtk", line 9, in <module>
load_entry_point('deluge==1.2.2', 'console_scripts', 'deluge-gtk')()
[code]....
I've installed Ubuntu to take care of network intensive applications (read P2P). I've noticed what many others: uTorrent was faster than Deluge (and of course Transmission, et al). I know enough about how torrents work to understand that the client should not be THAT important, provided its stable and knows its way around. But still, uTorrent was beating Deluge hands down. Well, after fiddling with all the configuration options in Deluge, I think I could've found the reason for it being slower than uTorrent.
The problem was only evident with poor seeded torrents. I started by noticing that uTorrent saw way more peers, and - most importantly - some more seeds. Sometimes Deluge saw zero seeds and 2 peers, while uTorrent was seeing 2 seeds, and 16 peers. And that was the difference between one happy torrent, and a ditched torrent. But I'm rambling so I'll just say it : Deluge only uses one tracker from a multi-tracker torrent, while uTorrent uses all of them. So in uTorrent you just add the torrent and that's it, while in Deluge you have to force it to check the other trackers by changing the priorities of every one to that each one be at the top of the list long enough for Deluge to get the seed/peers from it.
I just set up deluge on my of my old boxes running ubuntu server 10.10.
I'm trying to set up access to my deluge site from any where i travel (outside my network)
im not sure if im setting my port forwarding correctly on my router as i can't seem to access from out side my network.
i selected start and end ports to what i gave to deluge...
prefrences options are grayout in deluge after re-installcant download torrents neither.i delete all deluge files and install again and still prefreneces grayout.
View 1 Replies View Relatedi want deluged and deluge-web started at boot but not under root. So that all downloaded files are owned by not root, but user sm I made a script /etc/init.d/m
Code:
#! /bin/sh
# /etc/init.d/m
case "$1" in
[code]....
but it doesn't start, why?
How to open port for transmission or deluge to use torrents, 'cause any of both programs can download any torrent. I've searched on the internet and only find about open ports on hardware router, and that's weird 'cause Deluge on windows works perfect just after installing it and there's no need to open any port on hardware router.
View 1 Replies View RelatedHow to build .deb package from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files?
and
How to install Deluge-1.3.0_rc from deluge-1.3.0_rc1.tar.bz2 or from deluge-1.3.0_rc1.tar.gz downloaded source files.
How to edit source.listfile with Deluge auto-update?
OS: Ubuntu 10.04 Lucid Linux
Desktop PC, Intel Core2 Due.
I'm trying to set up Transmission/Deluge to do RSS feed downloading. I've got the clients working when I drop a torrent into the folder just fine, but FlexGet is giving me some trouble. I'm using feeds from EZTV & EZRSS to get the torrents for a show. I've used the feeds for months for uTorrent in Windows, so I know they're good. Below is my ~/.flexget/config.yml file.
Code:
feeds:
The Daily Show:
rss: 'https://www.ezrss.it/search/index.php?show_name=The+Daily+Show&date=&quality=&release_group=&mode=rss'
series:
- The Daily Show
[Code]...
Error) download download Failed The Daily Show 2011-01-17 [HDTV - FQM] (URL Error) This happens for every torrent in the feed. I think it has something to do with it substituting %28 for [, %29 for ], and so on, but I'm not sure how to fix it (or if it's actually the problem).
I recently ran yum update and upgraded to deluge 1.1.9-1. It worked for a while, but after a reboot all I get is this:
Code:
[swarm32@smithers ~]$ deluged -d -L debug
[INFO ] 00:06:39 daemon:48 Deluge daemon 1.1.9
[DEBUG ] 00:06:39 daemon:49 options: {'loglevel': 'debug', 'quiet': False, 'logfile': None, 'config': None, 'port': None, 'pidfile': None, 'donot': True}
[DEBUG ] 00:06:39 daemon:50 args: []
[DEBUG ] 00:06:39 core:91 Core init.
[Code]...
The title says it all.I'm not much for the command line so I really don't know how to debug this.Any help would be appreciated .It was working fine then I had some updates and now the window opens but It is just blank.deluge never fully starts.Transmission starts and I was using it for a while but it never worked as well as deluge.no where near for that matter. It was very slow and seemed to choke itself.
View 14 Replies View RelatedI installed deluge recently on a centos server, but I cant get deluged (daemon) started which I believe is very necessary to start deluge on a server.how to install deluge on a server?
View 3 Replies View Relatedhow to install the Deluge and its WebUI on centOS via ssh!
on this page there are some instructions and command :
deluge installation
but i when i go through that for installing i give me several errors!
how to do that with detailed information only for centos
this search may help but i found that confusing too
google search for installing deluge
may someone write a detailed how to install and run this on centos?!
I'm trying to blind deluge torrent to port 80 but as I'm running already a server on this port, I've decided to use the ProxyPass option in a vhost. As I prefer running through HTTPS, I've used my vhost 443 that I already use for bind AjaxTerm (SSH with a web interface)
But whereas AjaxTerm works, Deluge doesn't...I only get a black page but the tab name is correct (ie, Deluge: Web UI 1.3.1)
Here is my vhost
Code:
<VirtualHost *:443>
SSLEngine On
SSLCertificateFile /etc/ssl/private/localhost.pem
ProxyRequests Off
[Code].....
I'm dual booting windows 7 and ubuntu 10.10. I use Deluge on both boots. Both instances of Deluge share a default download location on the Windows partition. I would like both instances of Deluge to share it's 'State' folder, which is where Deluge stores the .torrent files it is currently using and the information about their progress and such. On the windows side this location is%APPDATA%delugestateand onUbuntu~/.config/deluge/stateI found them, they look good.I can read/write to the windows side from Ubuntu, the windows partition is automounted, yada yada. I can even autoadd the .torrents from the Windows location when I run the Linux Deluge.But what I want is for the Windows side to function normally while altering the Ubunutu instance of Deluge to use the %APPDATA%delugestate directory on the windows partition instead of it's default~/.config/deluge/stateSuch that when I add torrents in Ubuntu (primary OS) and switch to Windows, Deluge will be productively downloading/seeding while I'm wasting my life with Starcraft.Possible
View 6 Replies View RelatedI for the life of me can not find the list of CLI/console commands for Deluge. I'm trying to at least find the command to change global download speed.
View 3 Replies View RelatedI have problem with installing Deluge. I did not find any manual how to install Deluge. And I wanna install deluge newest version, and that is on Debian testing packages. So how can I install Deluge from debian testing packages. I read a little bit Deluge forum and there I see, there is lot of problems with Deluge on Debian Lenny. And all I need is use Deluge from web interfaces, thats all. How could I set it up?
View 6 Replies View Related