Ubuntu :: Computer Locks Up On Shutdown Process?
Jun 15, 2010
so i just bought a new Sony Vaio laptop and things are seeming to run great. However, there is one issue: when i go to restart or shutdown the computer, the graphical interface goes away like it should, it goes to CLI and does it's shutdown routine....the problem occurs about 2 seconds into the routine, when it just stops. it doesnt shutdown or restart, but stays in the CLI with a blinking cursor. if i allow it to set for a couple of minutes, a message pops up that says something like this, "BUG: soft lock up CPU0 CPU1 stuck, blah blah". any ideas on what this is or what is causing this? the laptop has the i5 processor in it, just in case that matters
View 6 Replies
ADVERTISEMENT
Dec 6, 2010
When I try shutting down Ubuntu (10.04) via the terminal (sudo shutdown now) it locks on the splash screen. I doesn't doe that when I shutdown with the button.
View 2 Replies
View Related
Feb 5, 2011
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
View 2 Replies
View Related
Jul 9, 2011
About a week after installing 11.04, I started noticing that my computer basically locks up after leaving it for many hours. When I come back, I cant get any programs to respond. I click on Firefox and it takes about one minute for it to finally respond. If I try to launch Konsole, it locks up too. But suddenly all programs start responding at the same time, after about one minute.
This is very frustrating and I just feel the problem is zeitgeist. Of course I am not sure because I cant even run System Monitor to check the problem since I cant run any apps for about a minute. By the time I run System Monitor everything is working again.
View 6 Replies
View Related
Apr 14, 2010
everytime i try to navigate to the home folder the pc lockes up. the mouse will move but the screen is locked upi have to restart
View 1 Replies
View Related
Jul 10, 2010
so every time I want to watch a video or let my computer play some music anything that leaves it without input the screen dulls then the computer locks it self even in the middle of when I am watching something.I have already set every power management setting to never turn off and it is still doing it is there any thing else that controls ubuntu's automatic functions that I have missed that would let my computer stay on without locking up,I am running the most recent version of ubuntu on a Samsung NC-10 netbook if that helps
View 2 Replies
View Related
Aug 6, 2010
Recently, ive been having this problem with ubuntu in which while im watching a movie and thus not doing anything else, everything locks up except for the sound (if i attempt to move mouse doens't work) and then it goes into the login screen. Previously, ubuntu would fade away into the login screen.
So is there any way to prevent ubuntu from going to the login screen if the user is not moving the mouse? non-fading login screen?
edit: oh and i also have this sometimes occuring problem where i type my password to login, it logs in, and then it immediately goes back to login screen. A second login works. probably not relevant
View 2 Replies
View Related
Oct 15, 2010
Since upgrading from 9.10 to 10.04, the "Switch User" functionality no longer works. I had hoped that upgrading to 10.10 might resolve the issue, but no joy. I am using 32bit Ubuntu 10.10 on a Levono R51 laptop, with three users. 9.10 was installed from a LiveCD, and I have partitioned the hard drive so that OS is in the first partition, and the three home directories are in the second partition (just in case I need to do a complete re-installation from LiveCD). Most of time only one person uses the laptop, but if a second person tries to switch from the current session and log in, they are greeted with the following;
-- a black horizontal line (approx top quarter of the screen)
-- a purple background with the Ubuntu title and 5 red dots (lower 3/4 of screen) -- but no login screen
-- moving the mouse renders a white box (approx 1x1 inches) with some black marks
The original user can recover their session with Ctrl-Alt-F7, but this essentially makes the laptop only usable for one person (one active login) unless the original user logs off.
View 1 Replies
View Related
Nov 19, 2010
I am running edubuntu in one of the classes of the school i support. My problem is that the children cannot remember the password for the computer if it locks. I have it set to auto login on the class user and I have disabled the screensaver asking for a password on resume, and disabled the powerdown options. So in theory it should stay on the desktop until they shutdown. However there is still the option to lock the computer and i am sure that they will find it and manage to lock themselves out of the computer! I am a linux beginner, but i have followed a few guides on the internet. I could really do with having their user with no password, so if they accidentally lock the computer they only have to click unlock to resume their computing.
View 1 Replies
View Related
Mar 2, 2011
I just installed 10.04.2 Desktop. Full install, reformatted all partitions. Hardware: Dell Optiplex GX200 with Dell 781p monitor Dell mouse and kybd.
All appeared to install well and as expected.
The computer has locked up 4 times, now. Whenever I attempt to use the mouse to drag a window to a different place on the desktop the monitor goes half black (bottom half of screen) and I loose the ability to use the mouse or keyboard to provide input. The only recourse is to shut it down hard and boot up again.
View 1 Replies
View Related
Mar 30, 2010
I'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
View 5 Replies
View Related
Jun 8, 2011
First, I upgraded to F15. All went smooth. No problem. But if I pull up a terminal in KDE via menu->utilities->Terminal, I get a terminal that shows only 3 lines. If I try to increase the size by pulling the edge it locks up the computer. Functions otherwise. This is Gnome Terminal 3.0.1. X terminal works fine. So does Konsole. But not the above application from the menu.
View 5 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Feb 20, 2011
Quite often (but not always) I'm getting this when I try to shutdown:
I looked at 'top' for a while and didn't see anything obvious, but there's always stuff running there that I don't necessarily know about. Looking at 'processes' using 'system monitor', I found a zombie'd process called 'runbackschedule'. Could this be it?
If not, how would I find out what the issue is?
View 2 Replies
View Related
Jan 12, 2010
in windows I have this little program called "poweroff". I use it to shut down my pc after vlc stops playing a movie. I set vlc to shut itself down after playing, and then the program starts a countdown to shutdown the pc. is there a similar program for ubuntu? could this be achieved through the command line? I'd like it to give me little warning period though, where I still have the option to cancel.
View 2 Replies
View Related
Mar 28, 2009
I am trying to install CentOS 5.2 on an HP rp5700 desktop unit. These units were originally sold as a Point of Sales unit I believe, but HP also markets it as a high life cycle server for SMB market.I tried to load CentOS on this unit via CD (created from downloaded ISO of course). It presents the initial CentOS banner page and waits for the obligatory "enter" to continue. It begins the boot process up to discovering the PCI stuff and just locks up, no response. I have to power down to restart.Since this does not even get to the point of installing. I am at a loss what to do next. Has anyone had a similar issue with other PCs.The boot stops at the lineACPI: PCI Root Bridge [PCI0] (0000:00)
View 3 Replies
View Related
Mar 29, 2010
recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:
Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.
Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.
View 1 Replies
View Related
May 9, 2010
I haveing a big problem atm (just after to upgrade to 10.04). I have a simply and easy script that sent a halt command to every KVM virtual machine actually running into the server. this script is/and was) palced as a init-rc script in rc0/rc1 and rc6 lvls. Just after to upgrade, I have noticed that this script is executed but the system ignore the time that it require to finish (giving time to correctly stop a single virtual machine). Aftert 5 second it start sending SIG-TERM and SIGN-KILL to any currect process and then reboot/halt.
I have just done a new script using upstart and I got just the same result. What is happending? why is the waiting the init secuence for a valid/or_not termination of any init script. I am so sorry for this crap english I have never study this language so I try to do my best anytime I speak it (or try ti..).
View 9 Replies
View Related
Sep 29, 2010
Sometimes when I shutdown Ubuntu 10.10 and try to turn on the desktop PC it fails. I then have to disconnect tower from the power source and plug it in after waiting a few minutes. This problem first started in Ubuntu 9.10. I have a hunch that it happens because I am shutting down with applications open.
I was told that this is a batter issue on my motherboard, but I've replaced it and still have issues.
View 6 Replies
View Related
May 2, 2010
My ubuntu won't shut down, it stops at the ubuntu logo (with the dots under it). It seems like the OS completely and successfully shuts down, also the harddrive spins down too, except for the computer. I belive this might have happened after I updated my bios. (due to hybrid gpu trouble)I did search on the internet, and found that it might be some ACPI related issues, and that I have to edit the grub's menu.lst file and add acpi=force.However my menu.lst file is blank, there is nothing in there.
I have tried to shutdown via the terminal too, but the same happens there. Last time I checked it successfully reboots, and standby works correctly. For me to shutdown this laptop, I have to remove the battery and the power cord for it to shutdown, or hold the power button for 10 secs, which is really annoing
View 9 Replies
View Related
May 16, 2010
just recently I upgraded from 9.10 to 10.04. Now whenever I shut down computer gets stuck after umounting disks etc, so I have to shut down using power button, similar to this error[URL]
View 2 Replies
View Related
Jul 31, 2010
I'm running Ubuntu 10.04, and ever since last upgrade a couple of days ago (I think), everytime I hit shutdown on the gnome-panel (admittedly, I haven't tried the command line shutdown) the computer restarts itself. This computer is dual-booted with Win 7, and the shutdown command there properly halts the system.
View 3 Replies
View Related
Dec 11, 2010
This isn't stricly an Ubuntu question, but it is in the cause of an Ubuntu-powered home server Essentially: does wake-on-lan work if the computer is Shut Down (ie to all intents and purposes 'off' except for the hardware switch on the back), assuming that the motherboard and network interface (which in my case are one and the same) support wake-on-lan?
Also, if wake-on-lan is turned on, will this mean power going to anything other than the network interface (e.g. will PSU, CPU, case fans still be on?)Finally, will all of this work on Ubuntu 10.10 (assuming that the computer components are compatible)?
EDIT: Just to be clear, the Ubuntu system will be receiving the wake-on-lan 'call' (from a Squeezebox, though from my very limited knowledge of this stuff I don't think the source matters)
View 2 Replies
View Related
Apr 29, 2011
My laptop randomly shuts off, at first I thought it was an issue with the laptop overheating but during the install of 11.04 I made sure the laptop had a fan blowing on it constantly and checked it and determined it couldn't have overheated. My problem now is that I was able to use a live cd to access my old files but was presented with only two files stating that my files were encrypted, I'm don't ever recall encrypting my files and so I'm without a passphrase.
What I'm wondering, is there a way to gain access without the passphrase? Or is there a way to fix the corrupt install?
View 4 Replies
View Related
Apr 30, 2011
I used to like having that Red Shutdown Button on the top panel in the far right corner next to my name on older Ubuntu versions. It was easy to add with the 'Add to Panel' right-click feature that Unity eliminated. Is there a way to put that Red Shutdown button back on the far right top? IMHO it works better than the present Unity shutdown button.
View 4 Replies
View Related
Aug 23, 2011
I am using latest kde version in latest opensuse. I am working with distro one and a half year now (of course I was doing updates all this period) The last twenty dates if I have a quite heavy session I can not log off (or shutdown the computer) I even tried from konsole qdbus org.kde.ksmserver /KSMServer logout 0 0 0
even that did not work (well right now I can not launch any new apps from kde, but I still work with the already running).
View 9 Replies
View Related
Jul 11, 2011
when I am pressing the shut down button inside kde I receive this nice black screen with the green status messages indicating what was done successfuly. At the unmounting file systems though I have to wait for a 20-30mins duration to finished. I have two or three network shares but even a timeout would not take more than 1 min to appear.
View 6 Replies
View Related
Apr 20, 2010
just ran the obligatory kernel update for Karmic 9.10 and now my computer doesn't shut down when prompted to do so. It tries...goes through the logoff, makes all the motions and then hangs at the very end.
Reinstalled Ubuntu...same thing after kernel update.
View 1 Replies
View Related
Sep 1, 2010
I have an 80GB HDD where I installed Windows XP first and then Ubuntu. The thing is that whenever I shut down my computer and then turn it back on (wether it's right away or a few hours later, or the next day), I get the GRUB screen where you have to choose Ubuntu, but after that just a completely black screen. I then have to force a shutdown, then turn it back on, and it works. Whenever I restart it works too, this seems to happen only after a shutdown.
Specs:
Dell Dimension 4600
P4 2.8 GHz procesor
2GB RAM
ATI Radeon x1650 video card
80GB HDD
View 7 Replies
View Related
Sep 27, 2010
Is in Ubuntu option, that can shutdown computer after time or at defined time? I think: I have turned on my computer and I will need to automatically shutdown computer after 4 hours or at 21.00 pm. Is there option, if computer can automatically turn on at defined time?
View 9 Replies
View Related
