ya i cant load compiz.....please help i have already went to synaptc pacage manager and maked for compleat removal and i reinstalled it?
Code:
compiz --replace
in terminal and it spits out this
[code]....
I have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code:
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.
[Code].....
Compiz Fusion set to load on boot; it doesn't. Settings checked as start on boot, it just doesn't and has to be loaded manually from desktop 2.) Desktop Drapes (wallpaper changer) also set to load on boot; also doesn't do so, even though checked to do so, and also must be loaded manually from desktop. 3.) Something is hogging CPU cycles something awful; if I have more than a few tabs in Firefox open, it takes forever to scroll or reload, and the entire system just bogs almost to the point of unusability. This same behavior exists offline when using any graphic capability (Shotwell or even just Nautilus file manager, if viewing graphics as thumbnails.
I realize this is kind of all over the place and all-inclusive, but although my experience USING Ubuntu goes on several years, it's been generally so trouble-free that I've not had to dig around under the hood much, and I'm kind of at a loss as to where to begin troubleshooting this mess. Would it be easier to just back-up and nuke/reinstall the OS?
I have dual monitors and running openSUSE 11.2 with a Nvidia 260 with 897ram on the card with 16GB system Ram and AMD dual core CPU. I can get the monitors to work just fine with the Nvidia drivers i just cant get the Compiz to load.Here is my xorg.conf. I have had it running before but just cant rember what i did.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Fri Mar 12 02:13:46 PST 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Fri Mar 12 02:12:40 PST 2010
[Code]...
I am running 64bit version of Fedora 12. After I logout or restart, I lose compiz function and I have to manually activate by "applications" - "system tools" and compusion fusion icon click.
Is there a way to automatically start each time?
On login, my skydome (in the Desktop Cube) doesn't load up. Instead, I get a gradient.
I go look in the settings manager and sure enough, I see the skydome image file checked there, and I even changed my gradient colors to be 100% transparent. Makes no difference! All I have to do is change /anything/ in the skydome settings and the skydome image suddenly shows up. Literally changing the gradient color will even make the skydome image show up.
I typed the metacity --replace command in Maverick to turn off compiz so I could change compiz files for the "mac minimize" effect. The default Ubuntu installation had compiz working but now it won't work at all. I tried downloading the proprietary driver from "system --> additional drivers" as well, but it said it failed to install.
I have an ATI radeon 3200 HD card. What can I do?
As said here: [URl] I want the sphere deformation, but that needs the PPA apparently (I can't find it anywhere in the default compiz Ubuntu 10.10 ships with.) Compiz starts, but it says it can't load plugin 'decoration.'
Code:
Backend : ini
Integration : true
Profile : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
compiz (core) - Error: Couldn't load plugin 'decoration'
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this:
Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
I spent *#@$ hours trying to figure out how to change my default window manager to "compiz-manger".I tried using gconf-editor and .gnomercAnybody has an idea how to do this?
View 8 Replies View RelatedI created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View RelatedI reinstalled fedora the other day, and it's been working just fine, apart from the internet. It shows that I have a full connection with the wireless network, but it's really difficult to actually load a page. 80% of the time it just fails and shows "Page Load Error". It's really frustrating because it is connected to the internet. In fact, the icon in the address bar even loads from the site I try to access, but websites just will not load.
I've tested my wireless internet with another laptop which is running vista, and it works perfectly on that. Also, I'm running Fedora 10 on an Acer Extensa laptop.
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
I dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
View 1 Replies View RelatedI just built my linux box and i installed compiz and ccsm. When i change settings in ccsm nothing happens including after i reboot. Once in a while after i boot gnome do and yakuake don't start and the screen is frozen except for pointer.
View 3 Replies View RelatedWhen I turned on my computer today, Compiz would not start. I tried launching it from the terminal, and this is what I got:
Code:
joseph@joseph:~$ compiz --replace
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
[Code]....
I have emerald on Ubuntu 9.10 64bit, and I wish to use emerald to decorate windows.When I run
Code:
emerald --replace
, the windows are decorated, but the command does not return. That is to say, I need to press
[code]....
let me start with this I am running the 10.4 beta2 via wubi on an Acer 6930. the Main os is Windows 7 Ultimate 64 bit. I installed 10.4 32 bit Wubi. my hardware it intel core 2 duo 2Ghz 4GB ddr Mobile Intel GM45 Express. I think that is the applicable hard ware infoNow for my problem: when I am using Compiz dsktop cube or desktop wall In't set the horizontal size to 4(for a perfect cube like I want) it works with any other value, from 1 to 128 just not 4 has any one else had this issue or know of a fix?
View 1 Replies View RelatedI had Compiz, desktop cube and what not, working fine on my computer. Then I had to reinstall ubuntu and know it wont work. I installed compiz and the compiz setting thing is in my preferences, but when i try to edit something it does not effect anything.
View 5 Replies View RelatedLike my title states, Compiz or any desktop effects aren't usable for me in 10.04. Never had any problem with any previous release. I'm using the open drivers with my ATI 1950 GT. At first I thought it was due to the fact that I have dual monitors now, but after disabling one and trying again it still acts up.
All I can explain it is it's as if my desktop were "lagging". My mouse cursor will jump and stay in a certain area and I can only move windows a short distance before my mouse pops off and the window jumps back. Minimizing windows also seems like it's a burden on my computer and will take a few seconds to do so.
This is the same setup I've had over various distributions and this is the first time I've experienced it. Anyone have any idea if it's fixable or if my computer is just finally getting too old? I can post the rest of my specs if they're needed.
I can't use compiz because my computer doesn't support it.
View 4 Replies View RelatedI go under the System>Preferences> Menu but the is no compiz there. I tried to run it from terminal and when i did everything went away and could only see my desktop's background image for about 2-3 sec,then everything came back and i got this in the terminal
I've just did a new format to my linux partition,when the installation was finished i had the same theme that i had before the format. All the effects that i had activated with compiz still work(cube,wobbly windows etc.)
Should I turn ON compiz with 512 RAM on mine AAO or do in need more RAM?
View 1 Replies View Relatedafter I upgraded to Ubuntu 10.04, I have not been able to use compiz. when it runs, it does
not do anything. I tried "<NAME>@LINUX-PC:~$ compiz &
[1] 5881
<NAME>@LINUX-PC:~$ compiz (core) - Warn: No GLXFBConfig for depth 32
[code]....
How do I install Compiz?
View 2 Replies View RelatedI'm trying to use the accelerometer build in my Hp Mini 2140 to rotate the cube desktop with compiz. The gesture that I want to enable is like this one [URL] . That is realized via the smackpad plugin for the HDAPS sensor that is mounted on the IBM/lenovo notebook and the Apple notebook. But I think that is a totally different architecture and wont work with my PC.
So I searched a bit and my HP Mini has an ST LIS3LV02DL accelerometer that is identified as a joystick in ubuntu. It's working very well, after having calibrate it with jstest-gtk I was able to use the accelerometer to play Neverball. So I'm wondering if there is a way to enable in compiz the recognition of joystick gesture to do actions in addition to the key bindings, the mouse bindings and the edges. In fact setting a movement in the Axis 0 has a gesture for rotating the cube will enable a smackpad like action on my HP.