I installed alsaequal URL....l and dependencies ladspa-sdk and caps, all via sbopkg.I'm getting this 'cannot open shared library' error even though that file does in fact exist at the indicated location.Has anyone run into this or successfully installed alsaequal? I also tried on a 13.1 install and got the same result.
View 4 RepliesI am using Centos 5.2, and I installed all of the available gnome and gnome development libraries available via the "add software" menu item. Still, when running some programs, I get the following error message:
"error while loading shared libraries: libzvt.so.2: cannot open shared object file: No such file or directory"
If I understood it correctly, libzvt.so.2 is part of some gnome libs... where to find and how to install them?
After finally getting my wireless/graphics drivers working yesterday (thanks to this forum ) I startx to realize that not a single KDE/Qt application will launch, along with Firefox, or Chrome/Chromium. (I did a full install from the DVD, not deselecting anything, and when I upgraded to -current, I also did the same.)
Ark said:
Quote:
ark: error while loading shared libraries: liblzma.so.0: cannot open shared object file: No such file or directory
but I managed to fix that one by commenting out 'aaa_elflibs' in /etc/slackpkg/blacklist (on a recommendation from #slackware), and running slackpkg upgrade-all again, but that's the only one (afaik) that was fixed. Ark still doesn't work, but it doesn't show that error anymore. When I run it, a box pops up that says "Unable to find Ark's KPart component, please check your installation."
Kate still says:
Quote:
kate: error while loading shared libraries: libkemoticons.so.4: cannot open shared object file: No such file or directory
Now, konsole, firefox, and Chromium's errors are a little different.
Konsole:
Quote:
konsole: symbol lookup error: /usr/lib/libphonon.so.4: undefined symbol: _ZN9QMetaType15registerTypedefEPKci
Firefox and Chrome basically say the same thing
Quote:
/usr/lib/firefox-3.6.13/firefox-bin: symbol lookup error: /usr/lib/mozilla/plugins/skypebuttons.so: undefined symbol: _ZN9QListData11detach_growEPii
again, I am completely baffled here, as I had kate, konsole and ark running before I upgraded to -current.
I think that the solution is very simple, but I cannot reach this solution. I'm trying to build an B.so that uses A.so.
A.so is compiled using C;
B.so is compiled using C++;
Inside "Aso.h" file I'had declared:
Code:
#ifdef __cplusplus
extern "C" {
#endif
[code]....
There's no error to compile that, this library seems to be compiled correctly, but using the "nm" command the Aso.so functions appear with "U" of undefined. Trying to build an executable using the Bso.so library, I got this error: /lib/../lib/libBso.so: undefined reference to `foo(int, int, int)' I think that to solve this problem it's only link the Aso.so with the .o files generated at the compilation phase of my Bso. Using the "ldd" command I'm able to see that Bso.so depends on Aso.so, so what am I missing?
I recently installed a Slackware-13.1 32 bit system and I encountered an odd problem. I had a texlive-2010 package from slackbuilds.org, previously compiled on another 32 bit Slack-13.1 system. I just installed the precompiled package on the new system. However, whenever I tried to issue a latex command, kpathsea complained that it cannot find the shared library file libkpathsea.so.6. I googled a bit and I found that this could be circumvented by setting the environment variable LD_LIBRARY_PATH to "/usr/share/texmf/lib", where the library in question actually is.
This solved the problem. The weird thing is that on other machines I have installed, kpathsea had no issues whatsoever and I did not have to set the LD_LIBRARY_PATH. The only difference is that on those systems I had compiled and installed texlive, not just installing a precompiled package. Could that be causing the issue?
I'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
Code: mplayer: error while loading shared libraries: libcdda_interface.so.0: cannot open shared object file: No such file or directory
View 5 Replies View RelatedI'm running Slack 13 and trying to get my CAD suite to get going. But with little luck so far. It's built from source, gotten directly from the project page (unavailable at this time)[URL]. This is what I get when trying to run:
Code:
bash-3.1$ gerbv
gerbv: error while loading shared libraries: libgerbv.so.1: cannot open shared object file: No such file or directory
bash-3.1$ locate libgerbv.so.1
/home/wed/gedagaf/gerbv-2.3.0/src/.libs/libgerbv.so.1
[code]....
I downloaded wxGTK-2.8.11.tar.gz , compiled and installed ok. here's the problem, there's library lib libwx_gtk2_richtext-2.8.so.0 exist in my directory /usr/local/lib but no lib libwx_gtk2u_richtext-2.8.so.0, look this:
View 9 Replies View RelatedI have an application consisting of different processes and all these processes are linked to shared libraries. I start the application (spawn all the different processes) as say user1. Now with the application up, if I run a process p1, the process gets activated and works. However, if I start the same process p1 as a different user, say user2, which is completely different from user1 the process complains of
"error while loading shared libraries:...."
I set LD_RUN_PATH both in compile and runtime environment. LD_LIBRARY_PATH is set correctly in both places.
All the above works if I set the absolute path of the required shared libraries in /etc/ld.so.conf file and rebuild the /etc/ld.so.cache
Alright, just loaded a fresh copy of OpenSuSE 11.3 x64, went to update manager and let it update, came back and computer was shut down. After booting it back up, I cannot update any software, nor run any commands.
Here is my output:
Code: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory I've tried searching for this error, some people came back saying to run this:
Code:
But all that happens is this:
Code:
Nor ls work either so I'm stuck and thinking about a reinstall.
I don't understand how this system could be so messed up after a failed update.. Used to trust SuSE, not sure anymore after this incident..
Installed Skype but it wont launch. Running the latest Opensuse Gnome. Ive uninstalled it and reinstalled several times but always with the same error. When I try to run it from terminal I get this:
ig@linux-ljqk:~> skype
skype: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
Ive just now uninstalled skype and tried reinstalling it again via yast, but now I get the following error [PK_TMP_DIR|dir:///var/tmp/TmpDir.xftzR0] Repository already exists.
just installed Ubuntu 10.04 and installed the flightgear package and the fgfs-base package. I ran fgfs from a terminal and got this error:
Code:
$ fgfs
fgfs: error while loading shared libraries: libOpenThreads.so.12: cannot open shared object file: No such file or directory
$
So then I did:
Code:
sudo apt-get install libopenthreads12
and it gave me these errors:
[Code]...
I'm trying to run Kega Fusion on my laptop, which can now FINALLY run Linux (ATI drivers finally work on it), and I can't get the emulator to work..
Code:
brandon@brandon-laptop:~/Desktop/Fusion$ ./Fusion
./Fusion: error while loading shared libraries: libGLU.so.1: cannot open shared object file: No such file or directory
brandon@brandon-laptop:~/Desktop/Fusion$ uname -a
Linux brandon-laptop 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59 UTC 2010 x86_64 GNU/Linux
brandon@brandon-laptop:~/Desktop/Fusion$
Help? I have the ATI proprietary drivers installed. I tried without them and it still wouldn't work. (And OpenGL is seemingly working as Compiz Fusion is running. I also tried with Compiz disabled but the same error pops up).
I'm running lucid 32-bit. I get this error when I try to run the installer for Unreal Tournament GOTY:
Code:
Verifying archive integrity... All good. Uncompressing Unreal Tournament 436-multilanguage.goty Installer. /home/computer/.setup1548: error while loading shared libraries: libgtk-1.2.so.0: cannot open shared object file: No such file or directory computer@computer-desktop:~/UnrealInstall$ I tried installing libgtk1.2 (as told by some people in other threads), but couldn't do that:
Code:
E: Couldn't find package libgtk1.2
However, I checked that I do have libgtk2.0
So what should I do?
I want to run blender in Ubuntu910,but get below
test@ubuntu:~$ blender
blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I tried to upgrade my slackware xfce 13.0 >> 13.1. I read "man slackpkg" first, and then I did exactly what I read at the man pages, my system was in init 1 mode.
The mirror I used it was the Greek mirror for 13.1. The command slackpkg upgrade-all was running ok until the "r" letter after that all packages did not upgraded because it was ERROR CHECKSUMS.md5 to all of them. Slackpkg did not upgrade all this packages but just check them and them skip them.
When everything stopped I reboot but at loading time it stops and I have this message: "libuuid.so.1:cannot open shared object file: No such file or directory."
After that I have 2 options to press control-d to reboot or to give root pass and login as root@(none):
After I login I cant connect to internet, I cant shutdown the system only reboot it from cl, I even cant go to init 1 or anything else. I dont know if I can fix the problem but I have to try...
Code:
bash-4.1$ konqueror
konqueror: error while loading shared libraries: libfam.so.0: cannot open shared object file: No such file or directory
I just installed Alien Bob's HandBrake package and am getting a ton of warnings:
Code:
bash-3.1$ ghb
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstmpeg2dec.so': libmpeg2.so.0: cannot open shared object file: No such file or directory
(ghb:27626): GStreamer-WARNING **: Failed to load plugin '/usr/lib64/gstreamer-0.10/libgstsndfile.so': libsndfile.so.1: cannot open shared object file: No such file or directory
[Code]...
I've been building a minimal Slackware system with a small number of packages installed (following this article of ). But now I'm facing a problem with a library call 'libmpfr' when installing the package 'pmount'. I have tried installing libmpfr from source but the installation also REQUIRED libmpfr. Code: error while loading shared libraries: libmpfr.so.1: cannot open shared object file: No such file or directory.The only solution I could come up with is to look for a precompiled libmpfr so that I can install it using installpkg. But nowhere could I find it by now.
View 2 Replies View RelatedHow can I see if a shared library is currently loaded? (i.e. system-wide, process agnostic)How can I see all shared libraries loaded by a process?
View 2 Replies View RelatedI built a shared library for some API functions (C files) and compiled them with gcc. Now I'm writing a c++ application (compiling with g++) and want to link my C API shared library and be able to use it from my application. Is this possible? At first instance, it's not quite working for me. I was able to link my shared lib just fine with a C application but got an "undefined reference to `apiFunction()'" error when attempting to do it with g++. Just want to see if anyone has any insight on this subject and make sure this mix is even is allowed.
View 1 Replies View RelatedI am trying to install the WebSphere MQ Client on a Red Hat Version 5 server with OS x86_64bit.. When I try the first step of there process it fails trying to find shared libraries:ERROR: Installation will not succeed unless the license agreement can be accepted. The MQ Client is 32 bit, but I am told it should work on 64 bit server...
View 2 Replies View RelatedI need a design which requires complete modularity and speed. I have a huge monolithic process that i'm seperating now with individual modules as libraries.I'm just worried how to go about the no of shared libraries? for example can i have 10 shared libraries in place of 1? what will be the advantage in that case?
View 2 Replies View RelatedI have visited these boards a few times, but never posted. Here's my problem: I was given the source to a program and asked to get it running on a 64-bit Debian 2.6.26 machine. Currently it is working on 2 64-bit OpenSUSE machines.
The application uses TCL TK for a GUI and everything compiles just fine; however, on startup, the user must enter one of three possible modules to load; when attempting to load these modules (tcl 'load' function), I receive this error:
Code:
Error in startup script: couldn't load file "../Build/libMpf.so": libTransReaders.so: cannot open shared object file: No such file or directory
while executing
"load ../Build/libMpf.so Mpf"
("eval" body line 1)
invoked from within
"eval load ../Build/${px}${i}${sx} $i"
[Code]...
My code needs to link to some libraries. In my project file, I specify linker to link to abc library, for example. By default, does gcc link to libabc.a or libabc.so ? What if I really need to specify static or shared, how do I do that?
View 4 Replies View RelatedI have written a simple library and ended up with a .so file. I have a header file from writing the code that describes how to use the functions in the source code I have written. I think this .h files needs to be available to other programs that access this code.
I have seen lots of tutorials on how to copy the .so file to the relevant directories and make links with the version number. What I can't find is where to put the header file so that any programs I write to use my new library can access the header.
Hope this makes sense. For example, I might use <stdio.h> normally, I will need to access <mylibrary.h> once mylibrary.so is loaded (as far as I understand!)
It's weird, I've been using C compilers for embedded processors over ten years now and never given a second thought to how libraries and headers work behind the scenes!
I am trying to add some functions to a Postgresql database. The functions use a shared library which they think is: /usr/lib/pgsql/postgis-1.4.so They say: "ERROR: could not load library "/usr/lib/pgsql/postgis-1.4.so": libgeos_c.so.1: cannot open shared object file: No such file or directory"
I cd to /usr/lib/pgsql/ and do an ls. postgis-1.4.so is there. libgeos_c.so.1 is as well (and it's in /usr/lib/ )
Both the files seem to exist. I cannot copy either of them (cp says "cannot stat '[file]': No such file or directory".
I'd like to know if it is possible to play shared music library of iTunes on Ubuntu.
View 2 Replies View Related