I am connected to my wireless router (wlan0) i'm also connected to my laptop via cable (eth0) wlan0 has the internet connection, if i disconnect eth0 i can browse internet but if it's connected, i cant eth0 has manual address: 192.168.0.7 wlan: auto (right now:182.168.0.255)
View 9 RepliesI have installed ubuntu a few times in the past but if I've had to get messy with the command line I bailed. So given that I wanted to set up a home server/media center, I tried win server, but given research had told me that it is easier to accomplish all the features I wanted with Linux I decided the time had come to really see what I'd been missing out on. So what I am looking to accomplish is a full lamp stack, xbmc, samba, mail server, VMWare server, rtorrent, ftp, an probably a few others I have forgot because I can't get to my check list right now. Settled on ubuntu 10.10, had installed it a couple of times while it was still in beta, just to get a feel for it and get everything working so that when it was released I could do a fresh install knowing how to configure everything.
So on Sunday the time came. Everything was going fine until last night, I was installing roundtable webmail and all I came to download something and FireFox can't display any web pages, postfix can't deliver mail. The server can ping local machines but not google.com or another internet site, I can ssh into it an get a remote desktop session via various methods, both either over the local network, or internet. The website is getting served both locally or internet. I just cant seem to make any outbound connections to the outside world.
I have a edimax USB wireless and as soon as I plugged it in it worked i.e., it is able to connect to a wireless.
[Code]....
I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies View RelatedI have a fresh install of Fedora 13 on my Toshiba Notebook. I am able to connect to the internet but can not browse neither by Ethernet or wireless. I have an Intel Pro/Wireless 2200BG wireless card and a Marvell Technology Group LTD 88E8036 PCI-E fast Ethernet card installed. The command ifconfig shows an ip address. I am able to ping by URL and IP address. It does the same with the firewall disabled. I have also disabled the iptable & ip6tables in the services. I have even set fire fox not to use proxy settings. I am just not able to browse at all.
View 2 Replies View Relatedis the following (btw I'm new to linux) - installed f14, connected to WiFi from my home router, started Firefox, and it was not able to open any pageslong with that I successfully updated my system and applications (and even installed new ones) through the same internet connection.Being connected to WiFi on my workplace I am able to browse with firefox, but at home - not...What could be the problem? What additional info should I give?PS. Sorry if the problem was already addressed, I am trying to find the solution on the web - but no success. Also 1-day discussions on ru-net forums were not successful, unfortunately.
View 4 Replies View RelatedIn Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies View Relatednew installation of fedora 14 intel pro/wireless 29251abgeverything ppears to be workingbut ping doesn't workand firefox doesn't workping resolves names but doesn't ping??
View 2 Replies View Relatedmy wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
There is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
I want to set a up a network of inter connected pcs, for example on pc A linux is installed.now pcs B, C , D, etc should connect to A and do there work, for example A want to do C/C++, development, whereas B wants to do some PERL development or whatever, this is just an example, 2 different pc users might do same work also, and the connecting pcs may have Windows or linux or bsd.OSes now what h/w or s/w is required and what steps are required to set up this network, main pc would be connected to internet and also connected pcs might want to use internet also..have installed opensuse edulife , and use this as PC A for testing.. and I use bridged dsl Broadband connection to connect to internet , by the username and password provided by the ISP, in windows its easy to setup this connection, however not able to do on linux,
View 9 Replies View RelatedSo, I've installed Ubuntu v9.10 through the Wubi and I can see only the C, E drivers but not the D one (which is, where I have installed the Ubuntu itself and maybe that's why the problem appear).
View 4 Replies View RelatedI just booted up, after making a flash USB for a test (didn't work) so I booted as normally into Ubuntu 9.10 (not dual boot). When I get back on, there's this... I don't know how to explain it. If someone can think of a better way to explain this, I'll change the title to be a bit more helpful, and easier to search for those who have a similar problem.
I can't browse through windows (such as with Alt + Tab, or even just clicking on another window), nothing comes to the front, and stays as is. I've not touched my graphics / display settings, so the only thing I can think of, is when I was going through the boot-up applications, but I doubt I disabled anything that would have been graphics and GUI based, or the compizconfig-settings-manager disrupted something. I've ye to test anything, it's rather early.
log in ubuntu (i use Ubuntu v9.04) , and i go to Places->Computer, but i can't access to my local disks?A notice of error is:Code:Could not display "computer":Nautilus cannot handle "computer" locationsWhat's this error? How to fix it or only reinstall Ubuntu?And i have another question: How to install GTK+ , i want to find GTK+ deb file, but i can't. I install GTK+ by compile source code, but when i compile, in my ubuntu don't find package ATK,cairo.... But i don't know exact what's ATK, cairo. I can't find it.
View 1 Replies View RelatedI installed Ubuntu 9.10 as Guest OS with Windows XP as Host using Virtual Box. I have also installed the VirtualBox Guest Additions. Now I want to connect to the internet using my modem.
[URL]
From the above link, I downloaded the scanModem file from the Host XP. I don't know how to copy that file to the Guest Ubuntu OS.
[URL]
I couldn't find the /mnt/msdos directory - only /mnt (no files inside that directory). Also, don't know how to paste from the USB drive.
I made a full disk backup using Clonezilla on a external drive and I used lzo, but this time I need to browse its contents somehow and extract some files but I could not find a utility that reads lzo archives.
View 2 Replies View RelatedIts a single PC, I can ping my connection but I cant able to browse any sites..These are my outputs.
Code:
karthick@Learners-desktop:~$ ping -c 3 google.com
PING google.com (209.85.231.104) 56(84) bytes of data.
64 bytes from maa03s01-in-f104.1e100.net (209.85.231.104): icmp_seq=1 ttl=45 time=355 ms
64 bytes from maa03s01-in-f104.1e100.net (209.85.231.104): icmp_seq=2 ttl=45 time=355 ms
--- google.com ping statistics ---
3 packets transmitted, 2 received, 33% packet loss, time 2000ms
rtt min/avg/max/mdev = 355.239/355.534/355.830/0.665 ms
recently I got new wireless card, att usb Quicksilver(based/produce by Option?), for att.Regular gnome network manager freezes the computer when I am plugging it it therefore I installed the one from wicd.net.Also, I am using HSOConnect (to connect by to G3 network), and sometimes I connect to regular wireless g connection through router.
Under both cases I can ping the website by IP and can access the website by ip (ex. google) but can not ping or browse by name.As a side note... I can use and access Skype fine under g3 network and normal wireless.I tried browsing and finding other solutions in past few days but ended up breaking everything and reinstalling to get back to the point I am at now.I am working on the road, so not being to broswse is rather crippling to me.... also I can access internet normally only from home from different computer now.
I know this is probably an extremely easy question... but does anyone know how to browse the files of an mp3 player in ubuntu 10.04? when i insert it it shows up in rhythmbox, but i'm unable to browse the files manually... i also looked under media and it isn't showing up. any ideas?
View 2 Replies View RelatedI haven't been playing with linux for some years.
My setup:
Private router which connects to the internet.
Host: win7 with VMWare workstation
Ubuntu 10.04 runs in a virtual machine on VMWare workstation.
Win7 works fine. Ubuntu can ping with valid ip address and firefox can load a webpage if provided with valid ip address. Ubuntu cannot ping with domain name and firefox cannot browse with domain name. Examples:
Ping google.dk results in
Code:
ping: unknown host google.dk
Writing google.dk in the address bar of firefox results in
Code:
Firefox can't find the server at www.google.dk.
Code:
peterbf@ubuntu:~$ ping 216.239.59.104
PING 216.239.59.104 (216.239.59.104) 56(84) bytes of data.
64 bytes from 216.239.59.104: icmp_seq=1 ttl=237 time=40.3 ms
64 bytes from 216.239.59.104: icmp_seq=2 ttl=237 time=38.8 ms
^C
--- 216.239.59.104 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 38.892/39.645/40.398/0.753 ms
Writing 216.239.59.104 in the address bar of firefox results in a correctly loaded google page.
brand new install of 10.4 server and I'm having a strange issue. I cannot browse to any website by it's domain name, but I can connect via IP address.
I've been googling around and did the following:
added nameservers to /etc/resolv.conf based on an nslookup from my windows box:
nameserver 71.250.0.12
nameserver 68.237.161.12
I commented out the hosts line in /etc/nsswitch.conf per another site and changed it to: hosts: files dns
I can see other computers on my local network via IP and I can browse to the server's default apache page by it's hostname, so I'm assuming it's something about the server's dns resolution, but I'm not sure of my next step.
I tried browsing URL... from Ubuntu - no luck - all browsers fail saying it's some network problem or so,but when I launched windowsXP from VirtualBox from inside Ubuntu (Maverick x64) - no problem viewing this site.Anyone any idea what could be wrong?
View 9 Replies View RelatedI have Ubuntu 10.10 at work and I've installed a Windows XP virtual box machine under it, that is joind to our Active Directory domain(but Ubuntu is/will not joined). I've set up VPN on XP box and I can connect to it from Ubuntu. I want to browse network shares(that use AD for permissions) and domain sites(like sharepoint) from Ubuntu. But even after connecting to VPN when I can't browse network shares, and nautilus asks for domain user/pass and tries to open share with no success. What extra steps is needed to browse my corporate network from Ubuntu via VPN?
View 4 Replies View RelatedI have been quite frustrated searching around for others that have had the same problems as I have had an what solutions are available. It appears there is a plethora of issues surrounding file sharing between Ubuntu and Windows machines; but things work prefectly for some and not for others.
The specific problem that I have having is that I cannot access file shares from any of the Windows 7 machines on my network. I use a Windows 7 machine for the main source of files that I like to access from other machines on the network. I do not normally access it from other Windows 7 machines through a Homegroup (I have removed the Windows 7 PC from the homegroup while trying to figure this out as well) - I normally just browse the network via the Windows 7 machine.
Here is what I'm doing (and seeing):
1. Click on home folder icon on Unity's launcher
2. Click "Network" in the sidepane
3. Wait a long time (like 40 seconds or so). "Windows Network" is the only folder/icon showing up in the "Network" folder once it shows anything.
4. Click on "Windows Network"
5. "WORKGROUP" shows up
6. Click on it
7. There is a delay with no visual indication (other than nothing happens and clicking in that window does nothing) and then I see "Opening "WORKGROUP" - Click cancel to stop"
8. See "Unable to mount location - Failed to retrieve share list from server"
I ran 'smbtree -N' and see a line for the PC I'm currently using, plus I see the following line for the other two PCs in the workgroup "WORKGROUP" (name is different for other PC):
Code:
\MEDIA-PC
cli_start_connection: failed to connect to MEDIA-PC<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL
I've seen guides to auto-mount certain shares from other projects to specific locations, and I'll probably do this at some point, but I really want to be able to browse the other machines shares.
Code:
session request to 192.168.1.3 failed (Called name not present)
session setup failed: NT_STATUS_LOGON_FAILURE
I've always been a big fan of linux having used it extensively in the military, came across a really nice looking distro called ubuntu 8.10. I installed it along side Vista on my hp dv7-1170 laptop and dual boot. Worked like a charm found all the drivers for all the hp devices including the webcam bluray etc. So I decided to put ubuntu on exclusively and just run virtualbox ose and put a vista session on there for when I needed it.
So I did that no problems, went and installed all the updates. Between the time I installed the updates and downloaded and installed a server patch to allow it to use all 4gb ram, I lost my inet connection. which was wireless. So I plugged into cat5 outlet and nothing. Just won't get an IP, so I wiped it again and reinstalled. Now I still can't get an IP from wireless or eth0. I can manually assign it an ip and it says connected, but still don't get out.
I installed several desktops on my system to test them out recently. After that I did an update and the system proposed to autoremove some files that were not used anymore. Since then, I can't connect to the internet from any of my desktop environments. In GNOME, the wireless network applet completely disappeared, the same thing with KDE, so I'm thinking a system driver must have been deleted. Could you indicate me any file that I might need to download to repair this problem?
View 1 Replies View Relatedmy netbook doesn't see my HomeWlan, but like every other int he neighborhood. I am using a live-usb atm because i want to check if everything works out bevor i completely install ubuntu.
Details: I want to use my home-WLAN but Ubuntu doesn't see it, which is quite fascinating because it does see a bunch of other which belong to the neighbors. The second quite interesting part is that when i switch to windows i can connect without any problems (and yes it does see it as well). Any clues what might cause that behavior? My only guess is that the adapter broadcasts on a false Channel, but i aint sure about that. I entered "sudo iwlist chan" and the output is:
Code:
lo no frequency information
eth0 no frequency information
eth1 14 channels in total; available frequencies :
//bunch of frequencies
current channel 1
So i guess my adapter broadcasts on channel 1, but my router does on channel 6 (I am sure about that part). But when i tried to "fix" it with "iwconfig eth1 channel 6" and then i check the channels again, it is still on the same on (Channel 1). Well, i do have a second guess but this one seems even more unrealistic than the first one, it might be possible that my adapter isn't strong enough to get the signal, even though there are just like 2 1/2 Walls between. But this scenario is really unlikely because my netbook is getting so much other signals.
I had a 9.04 install that was working well within the network. I had a lot of shares setup from a windows 2003 server. Unfortunately, I had a hardware failure and had to upgrade. Also unfortunately, 9.04 would not install on the new hardware (MB/CPU/RAM), but I was able to install 9.10.Now my problem is I can not browse the windows network. I installed samba and followed the instructions found here
When I go to network through nautilus, I see a windows network icon, when I open it, there is nothing.I am at a loss and really need this problem resolved (work production computer)
I can ping IP addresses of sites, say 209.85.229.99 (google.com), but I cannot ping google.com, nor browse it. Same thing for every alphabetic address and hence in practice I have no internet on my laptop. In windows, I'd just flush DNS but I don't know what to do in Ubuntu. I am using WICD.
View 9 Replies View Related