Fedora Networking :: [F14] Connected To WiFi, But Cannot Browse?
Nov 21, 2010
is the following (btw I'm new to linux) - installed f14, connected to WiFi from my home router, started Firefox, and it was not able to open any pageslong with that I successfully updated my system and applications (and even installed new ones) through the same internet connection.Being connected to WiFi on my workplace I am able to browse with firefox, but at home - not...What could be the problem? What additional info should I give?PS. Sorry if the problem was already addressed, I am trying to find the solution on the web - but no success. Also 1-day discussions on ru-net forums were not successful, unfortunately.
View 4 Replies
ADVERTISEMENT
Nov 11, 2010
I have a fresh install of Fedora 13 on my Toshiba Notebook. I am able to connect to the internet but can not browse neither by Ethernet or wireless. I have an Intel Pro/Wireless 2200BG wireless card and a Marvell Technology Group LTD 88E8036 PCI-E fast Ethernet card installed. The command ifconfig shows an ip address. I am able to ping by URL and IP address. It does the same with the firewall disabled. I have also disabled the iptable & ip6tables in the services. I have even set fire fox not to use proxy settings. I am just not able to browse at all.
View 2 Replies
View Related
Nov 22, 2010
new installation of fedora 14 intel pro/wireless 29251abgeverything ppears to be workingbut ping doesn't workand firefox doesn't workping resolves names but doesn't ping??
View 2 Replies
View Related
Apr 5, 2011
my wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
View 2 Replies
View Related
Dec 2, 2010
I just installed Fedora 14 i386, and Fedora can see the wireless network just fine. I try to connect and nothing happens. It asks for the PSK constantly (yes, I promise I'm entering it correctly), even after I enter it correctly (I guarantee). I've searched around here a bit, but due to my limited knowledge in linux system I can't figure it out
1.
Code:
lsusb
Bus 002 Device 002: ID 1737:0071 Linksys WUSB600N Dual-Band Wireless-N USB Network Adapter
2.
Code:
iwconfig
lo no wireless extensions.
[Code]....
View 1 Replies
View Related
Oct 14, 2010
I have installed ubuntu a few times in the past but if I've had to get messy with the command line I bailed. So given that I wanted to set up a home server/media center, I tried win server, but given research had told me that it is easier to accomplish all the features I wanted with Linux I decided the time had come to really see what I'd been missing out on. So what I am looking to accomplish is a full lamp stack, xbmc, samba, mail server, VMWare server, rtorrent, ftp, an probably a few others I have forgot because I can't get to my check list right now. Settled on ubuntu 10.10, had installed it a couple of times while it was still in beta, just to get a feel for it and get everything working so that when it was released I could do a fresh install knowing how to configure everything.
So on Sunday the time came. Everything was going fine until last night, I was installing roundtable webmail and all I came to download something and FireFox can't display any web pages, postfix can't deliver mail. The server can ping local machines but not google.com or another internet site, I can ssh into it an get a remote desktop session via various methods, both either over the local network, or internet. The website is getting served both locally or internet. I just cant seem to make any outbound connections to the outside world.
View 8 Replies
View Related
Feb 1, 2011
I have a edimax USB wireless and as soon as I plugged it in it worked i.e., it is able to connect to a wireless.
[Code]....
View 5 Replies
View Related
Sep 7, 2010
I've recently salvaged a computer I found gathering dust in the basement and decided I'll have it running on Fedora (I have a summer studentship coming up that needs Linux use so I thought I'd best start learning!). Following a clean install, Fedora can see the wireless network just fine. I try to connect and nothing happens. Half of the time it will ask for the PSK (yes, I promise I'm entering it correctly) and the other half of the time it will just stop. When it does ask for the PSK I enter it (correctly) and it will ask me again... and again.
Quote:
uname -r
2.6.33.3-85.fc13.i686
Quote:
lspci
00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
[Code]....
View 11 Replies
View Related
Jan 31, 2010
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
View 6 Replies
View Related
Mar 23, 2010
WiFi on this laptop worked fine for a few months then went out; after a reinstall of ubuntu (since 9.xx had come out since then anyway) the wireless still refused to even see networks, let alone connect to them; under Wireless Networks in the NM, I just see a greyed out 'disconnected'. This got me to thinking that it may have just been a hardware issue, but I find that hard to believe. Anyway, here's the pertinent information:
Started off with an lshw command just to see if a network adapter is even listed as being connected: `lshw`
Code:
id:
network:1
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection[code]....
As an addendum : I found this driver project but they claim to require a 2.6.8+ kernel; a quick `uname -r` shows that mine is 2.6.31, and an `apt-cache search linux-image` reveals that to be the highest available from repos; do Debian/Ubuntu distros not use more recent kernels or is this an Ubuntu-specific kernel naming scheme? If so, to what would it be comparable? I'm hesitant to try to install this and change my firmware if it's likely I'll be borking something.
View 9 Replies
View Related
Sep 5, 2010
I've been using my upstairs computer with no problems recently up until this evening, when I rebooted it did an automatic scan of my disks, so I left it to it's thing and when I came back ubuntu had successfully booted, and had seemingly successfully connected to my wireless network as usual.
I've been through the wireless troubleshooting guide, paying special attention to sections 4 and 6 but to no avail, while I'm apparently connected, and have been assigned an IP by my router I'm unable to access anything outside my computer, including the router itself. This happened before, however I solved it by reinstalling ubuntu, and I'd rather not do that again!
output of ifconfig
eth0 Link encap:Ethernet HWaddr 00:1c:25:38:8e:de
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
[Code]....
View 6 Replies
View Related
Sep 20, 2010
I am facing very strange problem with my Dell with WiFi card (04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100) It seems I am connected to the WiFi but can not access internet I have to disable networking and re-enable it to access internet.
Network configuration
Quote:
-network
description: Wireless interface
product: Wireless WiFi Link 5100
vendor: Intel Corporation
[code]....
View 4 Replies
View Related
Oct 13, 2010
I'm facing a strange problem after upgrading my Ubuntu to 10.10. After I start up the system, the wifi is not getting connected by default (which was getting connected automatically in the earlier version). So I right click on network manager and click on 'Enable Wireless' option and it gets connected. So far so good. Now I close the laptop lid - it goes to sleep mode and after it wakes up, the wifi never gets connected. When I right click on the network manager icon, the 'Enable Wireless' option is disabled! I have to reboot my machine to get connected!
Here are the details:
Code:
Laptop : Lenovo U330
lshw -C network output:
*-network
description: Wireless interface
product: PRO/Wireless 5100 AGN [Shiloh] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 00
serial: 00:21:5d:0b:08:d6
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-22-generic firmware=8.24.2.12 ip=192.168.1.3 latency=0 multicast=yes wireless=IEEE 802.11abg
resources: irq:46 memory:e4500000-e4501fff
View 9 Replies
View Related
Jan 9, 2011
The web navigation is very very slowly. The load of web page is slowly. I don't know what i do. I connect with wifi. the download with software same emule is good. I use firefox but i tried also other browser.
View 1 Replies
View Related
Jan 27, 2011
I've noticed that switching to Ubuntu about 6 months ago has made it noticeably more difficult to use the free wifi at my school. When I had Windows 7 on the same laptop, it was much easier to establish and maintain a connection. I know it's not the hardware. My question is: is there some security setting that makes it difficult to use public wifi on Ubuntu? Also, I don't have this problem at home on my WPA2 home wifi network.
View 1 Replies
View Related
Jul 9, 2011
I have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies
View Related
Oct 2, 2010
I just installed Debian with the latest testing iso, and I'm having problems connecting to the web via browser. I can ping hostnames (i.e. google.com, debian.org, etc.) from the terminal and it resolves just fine, but if I try to load a page from Iceweasel or Epiphany it says the page won't load because it can't resolve the hostname. Can someone tell me what I'm missing?the detail that I'm running amd64. I've checked iptables and found no entries, and for good measure I flushed it to be certain. I also checked resolv.conf but that looked normal, just a nameserver entry pointing to my home router. I'm new to Debian, but have used Linux for years, and I'm genuinely stumped. I'm sure the solution will smack me in the head for its simplicity, but nonetheless I need at least a shove in the right direction.
View 2 Replies
View Related
Aug 13, 2011
I am connected to my wireless router (wlan0) i'm also connected to my laptop via cable (eth0) wlan0 has the internet connection, if i disconnect eth0 i can browse internet but if it's connected, i cant eth0 has manual address: 192.168.0.7 wlan: auto (right now:182.168.0.255)
View 9 Replies
View Related
Jul 6, 2010
The Wifi is connected to my router but it still will not let me access the Internet or any other Internet based operation. (I am running 10.04, I had just installed and and now am trying to get the internet connection running)
View 6 Replies
View Related
Aug 12, 2010
Today I got my laptop back after its motherboard was replaced (soundcard failure) and I am having problems connecting to the internet. Connection to the wifi network is succesful, but Pidgin is not connecting ("SSL Connection Failed") and I can't view any webpages in Firefox. I loaded up Win7 and everything worked fine, connecting to the same wifi network and using the same proxy settings ("No Proxy").
View 2 Replies
View Related
Sep 7, 2010
I have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
View 1 Replies
View Related
Jul 21, 2010
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies
View Related
Jul 14, 2010
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies
View Related
Apr 22, 2010
In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies
View Related
Dec 7, 2010
I have a acer aspire. I recently dual booted with xp and fedora14. we have wifi in the campus and the problem is : I am able to connect to wifi & browse in xp but on the other hand with fedora I am able to connect and the signal is also pretty strong, but I am not able to browse.I am using a firefox mozilla, we also have a proxy for which I have configured all the setttings.The error being displayed is "connection time out".
View 1 Replies
View Related
Mar 8, 2011
I am trying to configure Dlink DWA 125 Wireless LAN Card on Red Hat 5.5 , in forums i see people have configured this one and here are few things which I have done. I can see my hardware and Network Manager also says that I am connected to my Wifi "ashhome" but then also inetrnet does not work If I ping yahoo.com it says " host unreachable "
100% packet drops .I am using NON DHCP System , and IP Addresses are assigned manually. Code: rootorahost:~[rootorahost ~]# uname -a Linux orahost 2.6.18-194.el5xen #1 SMP Mon Mar 29 20:31:17 EDT 2010 i686 athlon i386 GNU/Linux rootorahost:~[rootorahost ~]# Code: rootorahost:~[rootorahost ~]# n,[K[Knm-tool
[Code]...
View 3 Replies
View Related
Jun 20, 2010
i'm using redhat enterprise version, i'm facinh problem in wifi. i able to browse internet via ethernet but unable 2 connect via wifi and how to install applications.
View 2 Replies
View Related
Feb 13, 2009
From today, I am unable browse internet using Fedora 10. Before this, I was using net in F10 with no problem, F10 was automatically configuring for net settings. But now I cannot connect to internet in F10, but I can connect to internet using windows xp. I have ADSL modem which automatically connects to internet when it is switched on. When I press any site name in Firefox it won't display any thing (in status it shows done).
And even following command not works.
Code:
ping www.google.com
But following command works fine ( I know yum search for software in repo using internet). I wonder how this commend works, while I cannot browse web.
Code:
yum search player
(I am completely dependent on linux). One more thing before occurrence of this problem I had installed xmms, xmms-mp2 and xmms-skins. I don't think this created problem.
View 4 Replies
View Related
Jun 19, 2009
I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org
connect: Network is unreachable
[rtovo@davinci ~]$ host mirrors.fedoraproject.org
mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
[Code].....
View 3 Replies
View Related
Dec 28, 2009
I've got a weird problem on my fedora 12.
My computer is running behind an ISP box, Firewall shut off, SELinux disabled.
I've a local IP address : 192.168.0.2 dynamically given by the ISP through DHCP
I've got bind installed. I've defined a domain (let's call it mydomain.com) in the /etc/named.conf this way :
Code:
//
// named.conf
//
// Provided by Red Hat bind package to configure the ISC BIND named(8) DNS
[Code].....
Finally, the named service is running.
Here is the trouble : I can ping my domain, but when I try to browse to this domain in my browser, the connection is rejected !
View 2 Replies
View Related
