I have installed KlamAV just in case and am now proceeding with scanning. However, a few directories showed up in pop-ups non-accessible and at about 5% a whole sequence of such. I also remember this "access denied" occurring when I tried to change something in the Administrator menu, although I can't remember what
View 7 Repliesi put a windows program on my ubuntu pc and it's a portable program so i had to add a shortcut to the menu myself, well, i got the shortcut added but when i click it, it says that it cannot access it and it also says Permission Denied.
View 7 Replies View RelatedI want to change the Alt+F key in terminal to not access thefile menu (can't think of what it is called but File, Edit, View, etc...at the top). Alt is bound to access the first letter of the names in the file menus. This eliminates the Alt+F shortcut to move forward a word. I don't even mind so much if I permanently remove the alt binding to access the file menus.
View 3 Replies View RelatedOn my 10.04 desktop i have some maps from a user that doesn't exist anymore, but I can't do anything with it. Is there a possibility to make a "open as sudo" or something like that in the mouse menu? I haven't found an other way to do something with these maps
View 1 Replies View RelatedI have got a RHEL 5.6 server configured to authenticate via a Windows 2008 domain controller via LDAPS.Everything is working fine, except from the following: When I create a new user in Active directory and check the option "user must change password at next logon", the new user cannot logon and gets an "access denied" message. In /var/log/secure, I find the following:
Mar 1 14:43:21 cpssvn10 sshd[5363]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.3.12 user=testuser2
Mar 1 14:43:21 cpssvn10 sshd[5363]: pam_ldap: error trying to bind as user "CN=CPSS Testuser 2,OU=IBM,DC=cpss,DC=smarterplatform,DC=com" (Invalid credentials)
Mar 1 14:43:23 cpssvn10 sshd[5363]: Failed password for testuser2 from 192.168.3.12 port 4583 ssh2
As soon as I uncheck the "user must change ..." option, the user can log on without problems. Also password change via the passwd command works.
I have been trying to install the drivers for my Egalax Touch Screen. I keep getting the message that I do not have permission, and at the end it says "are you root?" I have searched topics on the internet, then remember Linux.
View 4 Replies View RelatedIn my recent installations of Debian stable release (Jessie) with Gnome and Cinnamon respectively, I added my wife as a normal user. A home directory was created automatically for her.
In these installations, I am able to access her home directory, while, in the past, I was not allowed to access her home directory on previous Debian releases.
Presently this client access the net through following setup
ADSL modem -> hub -> all computers
Now they want to do some kind of bandwidth control, content filtering. So I tried setting up squid with dansguardian. This is what I did
ADSL -> linux server -> all computers.
The linux server has two NIC cards. One to the ADSL router and another to the local hub. This is how my squid.conf file looks like
http_port 3128
acl ubc src 192.168.1.0/255.255.255.0 (for subnet)
http_access allow ubc
Have set the gateway server as 121.x.x.1. Which is the gateway server of the ISP. Now I can ping the local network, but cant ping the gateway or any other website. Also I am unable to access the router administration page.
I'm trying to setup a cups printing server, but I want the default admin to not be root. Google has given me a couple hints and the cups administration page a little further but I'm now stuck at the end.What I want is a user called admin who belongs to the group printadmin as cups server administrator.What I have done1) I have created a local user called admin user yast user interface , and a group called printadmin. Added admin to the group printadmin2) I changed the line in /etc/cups/cupsd.conf.SystemGroup sys roottoSystemGroup printadmin 3) Changed all instances of of Authtype from Basic to Digest (Allows me to have a file called passwd.md5 in /etc/cups/ with the name of the allowed cups admins inside)4) Ran the following command to create and add admin.Code:lppasswd -a -g printadmin dmin This is what I receive after running the commandlppasswd -a -g printadmin administratorEnter password:Enter password again:lppasswd: Die Kennwortdatei wird verwendet!
View 3 Replies View Relateddue to an exercise in Operating Systems I have to do the following: There are 6 users, user1, user2 ... user6 with home directories /users/user1 ... users/user6. User1 to user3 belong to group1, user4 to user6 belong to group2. The System Administrator wants to change the privilege* only to users 1, 2 and 3 to execute the file /bin/xxx. Which are the commands he has to type in order to achieve the previous?*I'm not sure if this is the right translation.What I have come till now is: Code: $ chgrp group1 <name_of_file> but it seems too simple to be right.
View 1 Replies View RelatedI'm having a problem with my webdav share. I have a secure webdav folder that gets accessed via a non-standard port and requires basic authentication. I can connect and interact with it fine via cadaver. However, when I try to connect from nautilus, it says "Access was denied." To make it even stranger, sometimes I can click on the folder in nautilus (it still mounts) and access it. Sometimes not (just repeats the error message and won't show me the contents). I may not even un-mount it, but just look at other folder, then click it again and be able to access it, but again - only rarely.
I asked a friend to try connecting from his windows vista computer and it would not work. It would not work from my windows XP virtual computer either. However, it mounts and works just find from my work computer (also Windows XP).
So it seems to be a 50/50 chance that the drive will mount on any given computer/system and work. Do anyone know what the problem may be? I'm guessing user permissions, but I can't figure out what.
I've made sure the webdav folder is owned by www-data and www-data has read access to the password file as well.
When I try connecting from nautilus, I get this in the log file:
Code:
Here is one of the (many) sites I've tried looking at: [url]
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedI have two external hard drives. One is a 2.5" 80GB USB HDD and the other is a Seagate 3.5" USB 500GB HDD. Both hard drives are mounted properly and I can access the data on both hard drives. I can access the small 80GB HDD via ssh from another computer and delete files, but when I try to access the 500GB drive via ssh it says access denied. When I try to access it with root, I can access it but I cannot see any files listed.
View 5 Replies View RelatedI have a linux domain (FEDORA CORE 1) and two laptop's which are part of my domain with windows xp pro service pack 2.I have given two ip's to both the laptop's being primary as global and secondary as local.I have configured printer in one laptop and shared.Till last week i was accessing that shared printer from my other laptop and every thing was working fine.Last week i formatted one laptop,(which dose not have shared printer) from then onwards i am not able to access my other laptop. I get the following message when i try to accessmy other Laptop,"you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permission there are currently no logon servers available to service the logon request"P.S : If i have only local IP i am able to see both the systems and i am able to access my printer, this problem comes only when i add global IP to both the machines.And also i have stopped the firewall and other things.
View 1 Replies View RelatedI want to capture short randomly occurring events such as Sudden Interstellar Disturbances, Lightning, ion counting, etc. To do this I wish to use the LINE-IN port. My sensor would feed a signal of less that 2 volts but could be submitted via a voltage divider. Since the sound card captures 44100 events per second this should capture events I am looking at, I think, but maybe not. I would capture the sound buffer to a string or memory buffer every second (and half second so I can prevent overwriting of its buffer, then merge the two).
Every 60 seconds (for validation) I would run "time" and count full buffer transfers in between to time events. By effectively counting characters from the beginning of the processing buffer to the beginning of the event I could further refine the "time to event". I think I could then save a decent number of values or until no data received from the processing buffer to preserve the event. This I would output with event time (to within 1/44100 sec) along with the data points captured to a file.
Except for the outputting of info to a file I think I can scan a buffer for events within a second (while LINE-IN continues capturing data on that port). I believe I have a way to handle the outputting. I am asking if any of the processing of the previous buffer would interfere with the sound cards data capture on LINE-IN? There would be no disabling of interrupts. I am presuming that system interrupts would not effect the LINE-IN data capture. Is this true?
I recently just installed centos, but it appears that when I installed it v 0.9.8e was installed consequently, all the lib's etc. are /lib/libssl.so.0.9.8e instead of an ordinary /lib/libssl.so.0.9.8 etc. and this is causing some problems for me, as programs are looking for /lib/libssl.so.0.9.8, and even if i symlink/copy/move /lib/libssl.so.0.9.8e to /lib/libssl.so.0.9.8 there are still some errors occurring. I had been reading that supposedly yum is meant to have a "yum downgrade" option, however it doesn't appear to be recognised when I run it on my centos server.
View 2 Replies View RelatedI'm brand new to Linux and Ubunto 10.04.On the menu bar at the top of my desktop I seem to have attracted some kind of bug!The Log Out Symbol repeats itself across almost the entire menu bar and I cannot remove it. If I remove other buttons from the menu the space is immediately replaced by more Log Out Buttons.When I hover on the icon I get the message 'Log out of this session to log in as a different user' and when I right-cllick to click on 'Remove from Panel' or 'Move' nothing happens.It is not possible to right-click on another part of the menu bar to change the Menu Properties.
View 1 Replies View RelatedI have install mysql on my fedora12. My different mysql server is located in us. I want to check health status and hits per seconds everything. Is it possible with mysql-administrator command.
now a these days i am connect through ssh and excuting below command
#mytop mysql -u root -p <passwd>
In my mysql db i have added the userip & passwd (allowed the privileages for that ip)
If i use mysql-administrator i am getting below error
MySQL Error Nr. 2003
Can't connect to MySQL server on '66.98.152.64' (111)
I just found some cool icons and I want to try them to see if they match my theme but I do not know how to change the Icon.
View 2 Replies View RelatedToday I tried to move an amsn skin into the right folder but the following message appears:
Access denied to /usr/share/amsn/skins/aMSN Live-1.0.
I am the only user on this computer so I think I have all rights?
permissions of the destination folder > owner: can view & modify content.
I wanna find a way to change the Computer menu from Kickoff.
View 6 Replies View RelatedI changed it and got it working a long time ago but i installed 10.10 (great work BTW ) and have forgotten completely.
View 6 Replies View RelatedJust got a new one, using 64 bit 10.04(LTS), firefox, also got on other computer using 32 bit 10.10
This one is for CNN, also have for Foxnews and a couple of others
Access Denied (policy_denied)
Your system policy has denied access to the requested URL.
For assistance, contact your network support team. [/COLOR]
When attempting to check my postfix install by using telnet to send an email to an address outside my local network, I get a relay access denied error.
This is how I attempted to send an email
Code:
telnet my_server 25
helo my_server
mail from: me@my_server
rcpt to: me@gmail.com
[Code].....
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
telnet my_dyn_dns.org 25
ehlo localhost
250-my_dyn_dns.org
250-PIPELINING
250-SIZE 10240000
[Code]....
I have also tried the above with my ISP smtp IP in relayhost - same error.
Using Ubuntu 10.04
I am trying to use the network printers shared within my University's AD domain. In Windows XP, I simply went to 'run' and typed "\[domain]", then it asked for my ID and passwords and list of printers came up from which I could just pick and add to my printer list. How can this be achieved in Ubuntu 10.04?
What I tried:
System->Administration->printing->Add->Network Printer -> Windows printer via Samba -> Browse, then I see the domain but when I input my id, domain name and password, access is denied...
I have been trying to run the following commands several times in the last coupl weeks, to no avail."su" to get to root...then while root "apt-get update" for updatesalso"sudo apt-get update"BOTH areenied even with root or user-admin pwd.States that either permission is denied and/or frequently states that the command "apt-get" does not exist
View 4 Replies View RelatedI recently installed 64-bit Ubuntu Maverick. This was a clean install as opposed to an upgrade. Since the install I have been having a heck of a time getting a remote filesystem mounted via nfs. The file system I have been trying to mount is located on my HDX-1000 media server. This machine is running a flavor a linux as it's operating system, and I have been using it for about 2 years now. I have been able to mount it's filesystem on all other machine in my house which include Windows 7, and a couple of earlier versions of Ubuntu linux. But I just could not get it to mount using Maverick. I kept getting the "mount.nfs access denied by server while mounting ..." message. Finally, I found a list of all the different parameters that can be specified on an entry in the fstab. The one that worked for me was simply to change the fstab entry from this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr
to this:
Code:
HDX-Server1:/share/media/HDX-Server1 nfs rw,rsize=8192,wsize=8192,intr,nfsvers=3
That is one more little gremlin down. Just 34,689 to go.
I've set up Ubuntu Server 10.04 LTS 64-bit. I've set up zfs-fuse and created a zpool named 'data' which contains two 2TB WDC Green HDD's in raid1 (mirror). I've set up an NFS server to share the pool. So far so good. But now, I want to write to the pool. It has occurred to me that I need to be root to do that. On the server, this is not a problem (sudo cp...) but on my laptop I can not copy anything to the pool because I'm not a superuser.
View 1 Replies View RelatedI am using ubuntu 10.10. when I am using Codeblocks IDE it says that, permission :access is denied. When I try to run e .cpp code it occures. I think permission is denied on my HDD. How to make all of my HDD permitted when in Ubuntu....
View 4 Replies View Related