Ubuntu :: Can Share Wifi Between Vista (host) And (guest)
Feb 25, 2011Anyone knows who i can share my wifi between my vista (host) and ubuntu (guest) ?
View 1 RepliesAnyone knows who i can share my wifi between my vista (host) and ubuntu (guest) ?
View 1 RepliesI am using virtual box with Guest OS Linux Mint on Host OS Windows Vista.I want to log in as 'root'.I typed 'su' at the terminal, then it asked for a Password
View 3 Replies View RelatedI would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
I have windows vista 32bit oem that originally came with DELL system when I bought new. On the PC, MS$ sticker has the product key for windows vista.When I reformatted the disk and re-install windows vista natively on the machine for which it was licensed, it got automatically activated and passed MS$ genuine check. But I got into problems when using windows vista as guest os from fedora 13 host os using virtualbox on exactly same machine for which vista is licensed for. I go that MS$ : x -days to automatic activation, activate now link. Clicking on activate now it says invalid product key even I entered correct product key as it is on the PC.
I tried to create new windwos vista guest os 2 ways:
1) using existing native installation of windows vista by using vmware converter to create vmware disk image of the running windows vista and shutting down and log back into fedora 13 used this disk image as the storage in virtualbox and create windows vista guest. It starts up ok except for that activation issue.
2) using the windows vista dvd and using that as the source for new windows vista installation in virtualbox. All fine except got that activation issue.After killing my 2 days just for this I dont know whats next. Does that not make sense that I have a license for using windows vista on this specific pc, I am entitled to install it on that same pc as virtual or native or even both ways ?
This link: http://www.zdnet.com/blog/bott/vista-vi icture/360 says starting with service pack 1 MS$ now allows virtual installation of windows oem. My native installation was updated to service pack 2 and I also updated the fresh dvd install of windows vista in virtualbox to service pack 1 and then service pack 2 but still no effect in regard to license activation.Did any one solved the problem in some way regarding this issue for windows vista, I would like to know.
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
Is it possible to read the host cpu's temperature from a virtual guest?
(1) Where host = ubuntu desktop and guest = ubuntu server, and
(2) Where host = windows xp and guest = ubuntu server?
Typically I would read the contents of /proc/acpi/thermal_zone/THRM/temperature on host ubuntu desktop. I guess its more tricky when running ubuntu on windows host. What I am trying to do is shutdown guest if host cpu temperature is greater than certain value.
I am using virtualbox 3.2.4 (virtualbox host only network (NAT)) on Windows XP Host and an ubuntu 10.04 guest. Recently installed vsFTPd on ubuntu guest and I am able to FTP from ubuntu to localhost. But when I try from the windows host I got an unknown connect error. I try with anonymous users enabled too.
View 2 Replies View RelatedQuote:
I'm working in php / mssql project and I'm working on php side. I try VirtualBox to access to mssql from linux. I'm using VirtualBox 3.2.8(Downloaded from VirtualBox website) Hosted On Ubuntu 10.04, and my Guest OS is Windows 7. I followed some tutorials on how to connect from host to guest, but all failed... how to connect from ubuntu (host) to windows 7 (guest)
i am running Ubuntu on my VMWare Workstation. i cant get it work the built in file sharing that comes with VMWare Workstation(by instaling the VMWare tools). but i want to share files between my XP(host) and Ubuntu. i googled this but came up with no good results.
View 1 Replies View RelatedI'm running Ubuntu 10.10 desktop in a VirtualBox VM on a Windows 2008 host machine. The end goal is join the the Ubuntu VM to a Windows 2008 domain. I've downloaded likewilikewise-open_5.4.0.42111-2ubuntu1.2_i386.deb se-open_5.4.0.42111-2ubuntu1.2_i386.deb to get the joining of the VM to the domain. But from this point forward, I'm completely lost.
1) How do I implement this likewise package?
2) How do I get files from my Windows 2008 host to the Ubuntu guest VM?
The likewise file is burned to a DVD. When I try to read the DVD, I get the "My Disk" icon but only one file gets displayed. In other words, the DVD the likewise file is burned to has a ton of files. Ubuntu doesn't see any of them expect one .exe file. The /etc/fstab had no entry for cdrom, so I put a line in that says
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 rebooted and that didn't do squat. There is no entry /etc/cdrom but there is directory /etc/My Disc. And I suppose that's what gets mounted because I can see one file on that disc. So then I thought, to hell with the DVD drive and I'll just get the Linux guest to see a "shared drive" on the host. I shared out a folder on the host via the Virtualbox "shared folders". But how I get the Ubuntu guest to see this shared folder is as big a mystery to me as is the creation of life.
I have a host with 4 VMs on it. How do I move them to another host? The first host is dying and I want to move the VMs to another host. I tried to copy the files under /vms from one host to another and then copy the files under /etc/libvirt/qemu to the other host. I then ran "virsh" and it does not see them.
View 1 Replies View Relatedim new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
View 3 Replies View RelatedI have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
Code:
[root@localhost ~]# ifconfig eth0
eth0
Link encap:Ethernet HWaddr 08:00:27:30:E9:72
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe30:e972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1871 errors:0 dropped:0 overruns:0 frame:0
TX packets:1926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1427538 (1.3 MiB) TX bytes:415769 (406.0 KiB)
Interrupt:11 Base address:0xd020
[root@localhost ~]#
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
i have installed virtualbox on centos , and installed xp as a guest os. my LAN is on 10.200.2.x/24 network inorder to avoid conflict i have given centos ip as 10.200.2.191/24 and a virtual ip 192.168.56.4/24 my gateway is 10.200.2.1 i am able to ping from my guest os to host os the ip address but not the gateway inorder for internet connectivity
some of the configuration of virtual box
Display
Video Memory:
16 MB
3D Acceleration:
[Code]....
I don't want to use image file as disk, but would like to allocate a disk for guest os. say it's /sda6, then do I need install guest os on host os? or can I install while the system is booting and only import a guest os from that? Do I have to mount the disk?
View 2 Replies View RelatedMigrating Virtual Guest to Native Host
I have been using ubuntu server and desktop on virtual box for a while now. I have come to enjoy it more than being in Windows. I would like to install it natively. I am wondering. is there any way I can take my virtual machine and apply what I have done there to a new ubuntu install?
I have a ntfs hard disk, will ubuntu resize that for me at install?
Any good apps for backing up all my my firefox data and then applying that to my firefox in ubuntu?
I need to keep windows for some stuff for work, and for some games I like.
how to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
View 1 Replies View RelatedI just upgraded to the newest VirtualBox, version3.2.4.r62467 and installed Ubuntu 10.4/64 guest on an Ubuntu 9.10/64 host. I installed the guest additions and set 3 shared drives. I can see them in the "machine folders" names, paths and access modes in the "shared folders" dialog. But, when I try to write to them, I always get Permission Denied!
I mounted it as root:
mount -t vboxsf tera /vb/tera
It shows up in mtab:
root@ubu-10:/vb# grep tera /etc/mtab
tera /vb/tera vboxsf rw 0
I can see the listing:
root@ubu-10:/vb# ls /vb/tera
bak Recycled <snip>
But, the permissions are wrong and can not be corrected. Chmod and chown are ignored?!
root@ubu-10:/vb# ll /vb | grep tera
drwxr-xr-x 1 root root 12288 2010-05-04 09:42 tera/
root@ubu-10:/vb# chown brianp /vb/tera
root@ubu-10:/vb# chmod 775 /vb/tera
root@ubu-10:/vb# ll /vb | grep tera
drwxr-xr-x 1 root root 12288 2010-05-04 09:42 tera/
I am running as root:
root@ubu-10:/vb# whoami
root
The VB shared folders dialog, machine folders shows /tera with access Full. /etc/mtab confirms that it is rw
I own it on the host:
brianp@trex:~$ ll / | grep tera
drwxr-xr-x. 16 brianp root 12K 2010-05-04 09:42 tera
Why can't I write to it?
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies View RelatedI have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies View RelatedI have rhel5 as host and guest is xp and rhel5, how will I make a network between them.
View 3 Replies View Relatedi just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies View Relatedpretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies View RelatedI'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
I can no longer drag files from my ubuntu host into my XP guest. I have vmware tools installed in XP and up until recently I could simply drag whatever I wanted back and forth between the systems. When I try to drag a file across into XP the cursor has the plus sign like it would normally to drop a file in, but now it also makes a selection box on the XP desktop. Same problem in Workstation and Player. I haven't posted on the vmware forums yet, I figured someone here probably has had the same problem. I don't think it was a kernel update. I restarted ubuntu with 2.6.31.18 which was fully functional before, still with the same problem.
View 1 Replies View RelatedI run KVM on 9.10 host and guest 9.10. Both are x64. When I halt the guest os:
My host OS looses its connection with internet for 10-15 seconds and then it comes back on. Probably something goes wrong with default gateway, as it looses only external network (I still can reach it on my internal network). I've googled a lot, but cant find anything about that. I use bridged network.