Fedora Hardware :: New Hard Drive - Disk Unreadable Errors
Dec 16, 2010
I had a set of rather unusual problems on installing a new 500Gb hard drive on my F14 system, I've solved them, but they were that unusual that I thought I should share them in case anyone else gets the same thing! I'd been experiencing intermittent faults on one of my drives, (lock ups for no reason, occasional boot ups that failed due to ' disk unreadable errors' and other odd errors). I assumed that the drive was failing, but it always showed 'Heathy' on disk utility! This was the disk with the OS on, plus my main 'data' disk had some bad sectors, so I thought I'd buy a nice big 500Gb and reinstall the whole system.
I backed up all my data to an external 'USB' drive, opened the case, (a big old under the table 'desktop', why do they still call them 'desktops'?) shoved in the new SATA drive and rebooted, intending to format the new drive to EXT4 and partitioning it before installing F14 again! OOOOOOOOOW! Major drive failure, missing OS, whole list of SDB errors! Control D, to reboot, BIOS only sees one drive; SDA (I have three, two IDE and one SATA) plus the one I just put in makes four. I go into BIOS and discover that it not only cant see any of the other drives, but my two DVD drives are missing too!
Now I've been building my own systems and mucking about with computers since before you could buy them, and Ive never seen a problem like this one! At first I thought the new drive had screwed my system, for on removal, the problem persisted! Then I noticed that the IDE connector in drive SDB, (the long 40 pin job) was just slightly out of line with the back of the drive, pushed it firmly in and what do you know, everything works! We moved recently and I think the vibration was enough to loosen the connector to give intermittent faults, and pulling the cables about to get the new drive in, pulled it out further......
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code: $ sudo hdparm -I /dev/sdb [sudo] password for brian:
On my FC11 installation Palimpset Disk Utility icon in the top menu bar is reporting that I have a disk failure with the caption "one or more disks is failing".When I open up the details section in Pilimpset I can see that "2 sectors are failing",I have checked this with gparted checking facility and it reports that the disk is OK.What I would like to do is to check the disk using a command like tool or ofline tool, which would then tell me where those bad sectors are on that partition so that I can resize it (using gparted) and have the bad sectors in NON ALLOCATED DISK SPACE.
I have a Seagate 1TB external USB 2.0 hard disk which contains 740 GB of data. Everytime I connect, it shows the memory occupied and the remaining memory(190GB)..but when i try to access the folders inside they read empty... nothing is seen in the folders.. I am unable to read any data from it or write to it... Same is the case with Windows When I run self-test in Linux ubuntu I get
I've a LaCie usb drive that seems broken. Not detected by nautilus or gparted, nothing at /dev/sdbX but still doing noise when I plug it. I guess it's an hardware problem but I want to be sure. Do you know some tricks to try to rescue my disk (make a final backup)?
I installed Ubuntu 10.10 onto my laptop and got a new plug and play device that wasnt being read so I went to go and install windows onto my laptop and when I get to the screen to select my partition it says its unreadable or its not detected but when I restart it it works fine in loading ubuntu.
I just upgraded to Fedora 11. (I decided to give 64bit a try and I am extremely impressed.Not one problem at all! Kudos to the devs.) Whenever I log in I get the Palimpsest Disk Utility telling me two of my hard drives have a reallocated sector count.I have two 1.5Tb Seagate drives (model #: ST31500341AS). One is a backup of the other. On the first disk the disk utility tells me I have 22 reallocated sectors and 53 on the second. I've been on Google on discovered that there is no easy way to fix this and that a few bad sectors are okay but too many is a sign of imminent drive failure. This obviously concerns me because both my main drive and its backup are showing errors.
I went to Seagate's website and downloaded their diagnostic software (Seatools for DOS) and it passed both of these drives.So, questions: is it possible that Fedora is giving me a false positive? If not, is 22 and 53 sectors something to be concerned about? If so, should I contact Seagate and see if I can pull warranty on these drives? Is there a way to repair this damage?
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I managed to have the ATI Catalyst driver (10.12) installed on a machine with F14 x86_64, Radeon HD 57xx and I also installed the ATI SDK Samples for OpenCL. ATI Catalyst reports OpenGL fine, glxinfo is fine, all OpenCL samples that do not use OpenGL are working fine. I used the "install to hard drive" feature of the F14 x86_64 desktop disk. Problem: which headers and libraries do I need to install in order to use OpenGL in an application? I would also like to have the OpenCL working on the system for another application.
Previously I had a small application working with SDL + Mesa library on FC9 using software rendering, but after F14 installation and ATI card addition the app is not working. Files gl.h, glu.h are missing. I checked the system and I found only a glew.h header. I tried linking against glew but it complains about glu.h (file not found).
I looked on the Internet and I found a post that someone suggested installing xorg-x11-devel, but there is no such package. I tried installing libX11-devel...f1.x86_64 but the gl.h/glu.h were still missing. I tried compiling the latest Mesa library with make linux-dri-x86_64 and it complains about egl. All dependencies have been checked (dri2proto, X11 version, libdrm, kernel version). After Mesa installation ATI Catalyst is no longer reporting OpenGL and glxinfo is not working. Am I supposed to install just the Mesa library without the ATI driver? Am I supposed to use glew only with the ATI driver?
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
Someone explain this to me. I often thought in the back of my head, how do I check if my drive is bad in Linux? I always excused it thinking well I guess besides gaming that's another reason to keep a windows partition around. I boot up yesterday and Gnome was acting weird. Then, it happened. "We have detected bad sectors in your hard drive." I thought, no, you're stupid, this hard drive is less than a year old (however it was a replacement for another one that died). So I reboot.
Boot back up - Different error message. But instead of getting it a few minutes after log in, I got it right away. "We have detected potential hard drive failure." Okay, Linux. Want to play this game? Booted to Vista, downloaded Seatools to test my Seagate drive. It failed... Swapped SATA cables... it failed... So I ask - how does Linux have this auto detect capability like that? As much as I love Ubuntu, I was like there's no way it could just magically tell like that without running the Seagate program. But alas, Ubuntu was dead on target.
I have a laptop, running Windows Media Centre unfortunately, and I think the hard drive is hosed. I was wondering is there away of checking the hard drive for errors using the ubuntu livecd? I would put ubuntu straight onto it only there are various items within Windows that the owner needs to get.
i am currently running palimpsest (system -> administration -> disk utility) and letting it "check" an unmounted filesystem.
i know its just running fsck.ext3 on this drive... the drive is formatted ext3, and is used on a hardware media player (WDTV Live Plus) in another room... i just moved it in here to avoid copying recorded HD shows over the LAN.
anyway, i was informed at boot with this drive connected that it needed to be checked, after booting it is mounted, but says it has errors and needs to be checked. it is checking, i would assume messages from fsck.ext3 would be logged to /var/log/fsck/checkfs, but i have never been interested in this type of thing before... usually when my drives start to get errors, its time to replace them... this one im sure is caused by being unmounted incorrectly by the stupid WDTV Live Plus...it locks up sometimes, lol...
i dunno, this is a big drive. just wish there was some "status update" other than a whirling indicator... im tailing the log file i mentioned above, but so far it just has "Nothing has been logged yet." (which i take as a really good thing at this point.
EDIT: at the very end of the filesystem check, i got a message about the filesystem being clean with no errors. id still like more of an indication than "whirling indicator thingy"...guess ill go back to CLI for checking filesystems. lol
I installed Ubuntu 10.10 beta yesterday and most of it is working very well. However, I ran into a problem with permissions today.I have a HDD containing my home folder and a HDD containing my data folder. The HDD with the data folder is mounted on /media/data/data_1.
I made sure I had set a+x rights on the file, tried executing it as root but the permission error stayed.When I copy that same file to my Desktop folder I can perfectly execute it.When it's located on the other hard drive I can't. I tried several command line scripts and they all work when I execute them from my OS hard drive,but not from another hard drive.
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a linux server running Red Hat Enterprise Linux AS release 4 (Update 8) that I need to do some unusual configurations to. I have a hospital application written using a database called MSE. Now the provider of this application says they will only support tape because of the fact that this system is using a specialized backup system. Basically the data is housed on raw_data blocks. So what I am looking to do is create a way to USE the SAN to present the server with Hard Drives and be mounted as if it was a tape. Has anyone tried to do something like this before? If so how did you configure that. One solution that I thought would be to just Present a 2TB lun and carve up several partitions cut not create filesystems on them. Then just create a symlink everynight /dev/rmt0 and rotate out the partitions.
I just bought a new 2 TB hard disk to replace my old 175 gig one. I currently am dual-booting Lucid Lynx and Windows 7, and rather than go through the process of reinstalling both, then reinstalling all my programs, settings, and everything, I was wondering if there's a way I can just copy the partitions on my 175 GB disk to the new one, grow them to fill up the rest of the free space on the new 2 TB disk, and then plug that HD into the primary master plug on my motherboard... will that work?
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
I have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c: The type of the file system is NTFS. Enter correct volume lable for drive C: I don't know the correct label.
Searching on the forums I found this. format c:/fs:NTFS/p:/ That doesn't work. I get this: "Invalid parameter - /p:"
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
I have a very strange problem. My computer is unable to boot from any hard disk but is able to boot from any CD or DVD. I have double-checked the BIOS settings and I am unable to figure out why is this happening. I have noticed that the Windows installer boots from the CD only if one presses a key when the message "Pressany key to boot from CD..." is displayed on the screen, otherwise it boots from the first hard disk.I have a triple boot system with Windows 7 (64-bit), Ubuntu 10.10 (64-bit), and Fedora 14 (64-bit). I have a dedicated GRUB2 partion on one of my disks. What I want is a boot-loader (any would do) on a CD/DVD/USB drive to chain load the GRUB2 present on my hard disk, without a delay, that is, without showing any message, menu, warning, etc. So, is there a way to do that?
